Quick Links
Thank you for purchasing a Sealey jack. This product is manufactured to a high standard of dependability, and if correctly cared for, will give you
years of trouble free performance.
IMPORTANT
READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, AND CAUTIONS. USE THIS JACK
CORRECTLY, AND WITH CARE, FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
1. SAFETY PRECAUTIONS
Ensure that the jack is in sound condition and good working order. Take action for immediate repair or replacement of damaged parts.
Use recommended parts only. The use of unauthorised parts may be dangerous and will invalidate the warranty.
Keep the jack clean for best and safest performance.
Locate the jack in a suitable, well lit, work area. Keep the work area clean and tidy and free from unrelated materials.
Use jack on level and solid ground, preferably concrete. Avoid tarmacadam since jack may sink in.
Place wedges under wheels of vehicle (but ensure wheels of jack can freely move).
Ensure the vehicle handbrake is engaged, the engine is switched off and the transmission is in 1st gear (or in "Park" if automatic).
Ensure minimum distance of 0.5m between vehicle tilt and static objects such as doors, walls, etc.
Ensure that all non-essential persons keep a safe distance whilst the jack is in use.
Ensure that there are no passengers in the vehicle which is to be jacked up.
Place jack under vehicle manufacturer's recommended lifting points (see vehicle handbook).
Check that the lifting point is stable and centred on the jack saddle.
Ensure that the jack wheels are free to move and that there are no obstructions.
DANGER: Use the jack for lifting only, NOT for supporting the lifted load.
Use correct axle stands under the vehicle before proceeding with any task.
Use a qualified person to lubricate and maintain the jack.
Confirm that the recommended hydraulic oil is used during maintenance.
DO NOT operate the jack if it is damaged.
DO NOT allow untrained persons to operate the jack.
DO NOT exceed the rated capacity of the jack.
DO NOT allow the vehicle to move during jacking or use the jack to move the vehicle.
DO NOT jack a vehicle if there is a risk of spillage of fuel, battery acid or other dangerous substances, or a risk of load movement.
DO NOT work under the vehicle until axle stands have been correctly positioned.
DO NOT use the jack for purposes other than that for which it is intended.
DO NOT top up hydraulic system with brake fluid. Use hydraulic oil only.
DO NOT alter the pressure control valve.
Store jack, fully lowered, in a dry, childproof area.
WARNING: It is very dangerous to go under a vehicle which is supported by a jack even if additional supports are used. DO NOT go under
a vehicle unless it is supported by adequately rated axle stands.
IMPORTANT! Ensure you can see the saddle and jacking point throughout the jacking operation in case there is any relative
movement.
2. INTRODUCTION & SPECIFICATIONS
2.1
Introduction
The 5000SL and 8000SL short chassis trolley jacks are suitable for use in confined areas
2.1.1
and are ideal for mobile use. The heavy-duty hydraulic units are fitted with safety overload
devices. The handles feature an integral safety release mechanism, which prevents
unintended release.
2.2
Specification
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5000SL . . . . . . . . . . . . . . . . . . . . . . . . . 8000SL
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ton . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 ton
Minimum Saddle Height . . . . . . . . . . . . . . . 145mm . . . . . . . . . . . . . . . . . . . . . . . . . . 155mm
Maximum Saddle Height . . . . . . . . . . . . . . .560mm . . . . . . . . . . . . . . . . . . . . . . . . . . 570mm
Maximum Chassis Height . . . . . . . . . . . . . . 200mm . . . . . . . . . . . . . . . . . . . . . . . . . ..210mm
Maximum Length . . . . . . . . . . . . . . . . . . . . 1200mm . . . . . . . . . . .. . . . . . . . . . . . 1395mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70kg . . . . . . . . . . . . . . . . . . . . . . . . .. . . .90kg
3. OPERATING INSTRUCTIONS
3.1.
Purging the Hydraulic Circuit
3.1.1
Open the release valve by turning the handle clockwise.
3.1.2
Pump the handle several times to ensure full internal lubrication and to bleed any air the
system.
3.1.3
Release the handle to close the release valve.
3.2
Preparing the Vehicle
3.2.1
Prepare the vehicle as described in the safety instructions, ensuring the ground on which
the jack is to stand is level and solid (not tarmacadam).
3.2.2
Position the jack saddle under the vehicle manufacturer's recommended lifting point.
3.2.3
Ensure that the jack is at right angles (90°) to the lifting axis. Refer to Fig. 1.
INSTRUCTIONS FOR:
SHORT CHASSIS TROLLEY JACKS
MODEL No's:
Original Language Version
5000SL.V2, 8000SL.V2
OVERHEAD VIEW
Fig. 1
5000SL.V2, 8000SL.V2 Issue: 2 - 12/02/10
Related Manuals for Sealey 5000SL
Summary of Contents for Sealey 5000SL
- Page 1 SHORT CHASSIS TROLLEY JACKS 5000SL.V2, 8000SL.V2 MODEL No's: Thank you for purchasing a Sealey jack. This product is manufactured to a high standard of dependability, and if correctly cared for, will give you years of trouble free performance. IMPORTANT READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, AND CAUTIONS. USE THIS JACK CORRECTLY, AND WITH CARE, FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 10mm below the filler opening. If the oil level is low, fill as required. NOTE: Use a good quality jack oil, such as Sealey Hydraulic Jack Oil. WARNING: DO NOT use brake fluid, or any fluid other than hydraulic jack fluid as this may cause serious damage to the jack and will invalidate the warranty.