To Configure Time And Date; Preset Values And Schedules; Using Preset Values - Daikin Altherma 3 H F+W User Reference Manual
Hide thumbs
Also See for Altherma 3 H F+W:
- User reference manual (24 pages) ,
- Operation manual (20 pages)
Table of Contents
4
|
Operation
4.6.4 To configure time and date
4.7 Preset values and schedules
4.7.1 Using preset values
User reference guide
30
In menu...
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
[8.8] Connection status
1 Go to [7.2] User settings > Time/date.
About preset values
For some settings in the system, you can define preset values. You only need to set
these values one time, then reuse the values in other screens such as the
scheduling screen. If you later want to change the value, you only have to do it in
one place.
Possible preset values
You can set the following user-defined preset values:
Preset value
Tank temperatures
[5.2] Comfort
under [5] Tank
setpoint
Restriction: Only
[5.3] Eco
applicable if a
setpoint
DHW tank is
present.
[5.4] Reheat
setpoint
You can read out...
Contact/helpdesk number
Room, tank or domestic hot water,
outside, and leaving water temperature
(if applicable)
Status/mode of each actuator
Example: Domestic hot water pump
ON/OFF
Current operation mode
Example: Defrost/oil return mode
Version information about the system
Information about the connection
status of the unit, the room thermostat
and the LAN adapter.
Where used
You can use these preset values in [5.5]
Schedule (weekly schedule screen for
the DHW tank) if the DHW tank mode is
one of the following:
▪
Schedule only
▪
Schedule + reheat
The software uses this preset value if
the DHW tank mode is
Schedule + reheat.
EABH/X16DF6V(7)+9W(7) + EAVH/X16S(U)18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F+W
4P556071-1C – 2021.09
Hide quick links:
Table of Contents
