General Information; Instructions For The Exhaust Air Pipe; Instructions For The Air Extraction Mode; Information About Circulat- Ing-Air Mode - Bosch DWB068G50I User Manual And Installation Instructiions
Hide thumbs
Also See for DWB068G50I:
- Instruction manual (12 pages) ,
- Installation instructions manual (8 pages) ,
- Instruction manual (12 pages)
Table of Contents
12.5 General information
Follow these general instructions dur-
ing the installation.
¡ For the installation, observe the
currently valid building regulations
and the regulations of the local
electricity and gas suppliers.
¡ When discharging the exhaust air,
the official and legal regulations,
such as the regional building
code., must be observed.
¡ In order to freely access the appli-
ance for servicing, select an easy-
to-reach installation site.
¡ The surfaces of the appliance are
sensitive. Avoid damaging them
during installation.
12.6 Instructions for the ex-
haust air pipe
The appliance manufacturer does not
provide any warranty for faults attrib-
utable to the pipeline.
¡ Use a short, straight exhaust air
pipe with as large a pipe diameter
as possible.
¡ Long, rough exhaust air pipes,
many pipe bends or small pipe
diameters reduce the suction
power and increase the fan noise.
¡ Use an exhaust pipe that is made
of non-combustible material.
¡ To prevent condensate from re-
turning, fit the exhaust pipe with a
1° gradient from the appliance.
Round pipes
Use round pipes with an inner dia-
meter of 150 mm (recommended) or
at least 120 mm.
Flat ducts
Use flat ducts with an inner cross-
section that corresponds to the dia-
meter of the round pipes:
¡ Diameter of 150 mm corresponds
to approx. 177 cm².
Installation instructions en
¡ Diameter of 120 mm corresponds
to approx. 113 cm².
¡ Use sealing strips for different pipe
diameters.
¡ Do not use any flat ducts with
sharp bends.
12.7 Instructions for the air
extraction mode
For air extraction mode, a one-way
flap should be installed.
Notes
¡ If a one-way flap is not included
with the appliance, one can be
ordered from a specialist retailer.
¡ If the exhaust air is conveyed
through the external wall, a tele-
scopic duct should be used.
12.8 Information about circu-
lating-air mode
The appliance must only be operated
when it is securely installed and the
pipework is connected.
12.9 Instructions for the elec-
trical connection
In order to safely connect the appli-
ance to the electrical system, follow
these instructions.
WARNING
Risk of electric shock!
It must always be possible to discon-
nect the appliance from the electricity
supply. The appliance must only be
connected to a protective contact
socket that has been correctly in-
stalled.
The mains plug for the mains
▶
power cable must be easily ac-
cessible after the appliance is in-
stalled.
25
Table of Contents
