Black & Decker BDXPA0022 Instruction Manual page 5

2-Pack Polarized Indoor Digital Bar Timers

IMPORTANT! Review programmed ON/OFF cycles: Hold down PROGRAM to scroll

through all cycles. Stop at any cycle you want to change. To change any programmed

cycle: Press HOUR, MINUTE, and DAY as needed to revise any individual cycle's ON/OFF

times. Make sure that the desired day/times selected for all ON/OFF cycles don't overlap any

other ON/OFF day/time settings.

When finished programming desired ON/OFF cycles, press ON/OFF until AUTO ON or

AUTO OFF appears in display. AUTO ON turns the appliance on immediately until the next

programmed OFF time. AUTO OFF keeps the appliance off and will turn appliance on at the

next programmed ON time. Timer must be in AUTO ON or AUTO OFF mode for

programmed settings to operate. Plug appliance (such as a lamp) into timer and plug timer

into wall receptacle.

TIMER MODE/TO OVERRIDE THE TIMER:

Press ON/OFF until desired timer mode is displayed:

ON: Programmed settings will be overridden; the plugged-in appliance will remain ON.

OFF: Programmed settings will be overridden; the plugged-in appliance will remain OFF.

AUTO ON turns the appliance on immediately until the next programmed OFF time.

AUTO OFF keeps the appliance off and will turn appliance on at the next programmed ON

time.

SECURITY (RANDOM) MODE:

To operate a plugged-in appliance (such as a lamp) in a random pattern while you are away,

to simulate actual use: with timer in AUTO mode, press CLOCK once, then press and hold

HOUR for 3-5 seconds. RND will appear on the display.

In Random mode, the plugged-in appliance will operate in random length on-off cycles. The

appliance will turn on anywhere between 2-30 minutes after the programmed ON time, and

turn off anywhere between 2-30 minutes after the programmed OFF time. The programmed

ON and OFF times must be at least 10 minutes apart.

Note: Timer will operate in Random mode only within a programmed ON/OFF cycle. To

cancel Random mode, press HOUR for 3-5 seconds and RND will disappear from display.

Timer will now function using your previously programmed settings.

DAYLIGHT SAVINGS MODE (DST):

Adjusts the timer one hour ahead to accommodate daylight savings. To operate timer in

daylight savings mode, press and hold CLOCK for 3-5 seconds until time display advances

one hour and +1h appears on the left side of display.

To cancel Daylight Savings mode, press and hold CLOCK for 3-5 seconds until +1h

disappears from display. Clock will move back one hour and timer will now function using

your previously programmed settings.

5