Panasonic FV-15CSD1 Installation And Operating Instructions Manual
Hide thumbs
Also See for FV-15CSD1:
Table of Contents
Quick Links
Warranty card attached
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before attempting to install, operate or service the
Panasonic product. Please carefully read "INSTALLATION INSTRUCTIONS" (P.2 ~ 3) of this
instructions before installation. Failure to comply with instructions could result in personal
injury or property damage. Please explain to users how to operate and maintain the product
after installation, and this booklet should be presented to users. Please carefully read
"USE AND MAINTENANCE INSTRUCTIONS" (P.6 ~ 7) of this instructions before operation.
Please retain this booklet for future reference.
Make sure that the correct information is written on the warranty card, including the date
of purchase and the name of the distributor. Keep the warranty card in a safe place along
with the instructions for future reference.
INSTALLATION AND
OPERATING INSTRUCTIONS
Nanoe Generator
Model No.
CONTENTS
SAFETY INSTRUCTIONS ............................ 2
INSTALLATION INSTRUCTIONS ............ 2 ~ 3
INSTALLATION REQUESTS.........................3
SUPPLIED ACCESSORIES............................4
PARTS NAME AND DIMENSIONS...............4
HOW TO INSTALL..................................4 ~ 5
TEST RUN...................................................6
INSTRUCTIONS......................................6 ~ 7
TROUBLESHOOTING..................................7
SPECIFICATIONS.....................BACK COVER
FV-15CSD1
7 ~ BACK COVER
Table of Contents
Related Manuals for Panasonic FV-15CSD1
Summary of Contents for Panasonic FV-15CSD1
-
Page 1: Table Of Contents
Thank you for purchasing this Panasonic product. Please read these instructions carefully before attempting to install, operate or service the Panasonic product. Please carefully read “INSTALLATION INSTRUCTIONS” (P.2 ~ 3) of this instructions before installation. Failure to comply with instructions could result in personal injury or property damage. -
Page 2: Safety Instructions
SAFETY INSTRUCTIONS Please observe strictly Disconnect power supply before maintenance. If the supply cord is damaged, it must be replaced by a special cord or assem- bly available from the manufacturer or its service agent. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for the safety. -
Page 3: Installation Requests
INSTALLATION INSTRUCTIONS WARNING Installation regulation concerning This product must be installed by local requirement should be fulfilled. qualified technician. Improper installation may cause This may damage the product’s the product to fall off. structure and decrease its safety. CAUTION Product must be installed tightly. Do not install the product on the window or wall. -
Page 4: Supplied Accessories
SUPPLIED ACCESSORIES The following accessories are provided with the product in the package. When you unpack, check if the accessories are all included. If not, please contact your dealer. Drawing Name Installation and operating instructions Warranty card PARTS NAME AND DIMENSIONS Unit: mm Part name Louver... - Page 5 HOW TO INSTALL Find the “▽” mark on louver, place Turn the install screw of product louver to product aligning the “▽” clockwise till the install plate clamping to “△“ on product. to ceiling. Product Frame Install plate Product Ceiling Louver Notice Ensure the tighten torque in the range...
-
Page 6: Test Run
TEST RUN Please check the following items by test run after connecting power. Does the fan rotate? Does the blue LED light light? Does it have abnormal vibration or noise? USE AND MAINTENANCE INSTRUCTIONS WARNING The fan may rotate even when power Do not inspect and maintain the supply is switched off. -
Page 7: Troubleshooting
USE AND MAINTENANCE INSTRUCTIONS Clean the dust on surface of louver with a cloth adding neutral cleanser, and then dry the louver with a soft dry cloth. Do not insert the finger or nanoe X exit rarity into the nanoe X exit. -
Page 8: Specifications
4. High OH hydroxyl amount (up to 4,800 billion of OH ions are generated per second) 5. Weak acidity (with weak acidity features close to that of hair and skin) Note: nanoe and the nanoe mark are trademarks of Panasonic Corporation. SPECIFICATIONS Rated Rated...