Page 2
Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories...
CONTENTS Contents 4 Safety information 6 Control panel 10 First use 10 Daily use 11 Helpful hints and tips 12 Care and Cleaning 13 What to do if… 15 Technical data 16 Installation 17 Noises 19 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to...
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap- pliance are thoroughly familiar with its operation and safety features.
– thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard.
Control panel • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. • Adequate air circulation should be around the appliance, lacking this leads to overheat- ing.
Display Timer function DYNAMICAIR function Minute Minder function Child Lock function Alarm indicator Temperature indicator Holiday function COOLMATIC function Switching on To switch on the appliance do these steps: Connect the mains plug to the power socket. Press the ON/OFF button if the display is off. The alarm buzzer could operate after few seconds.
Control panel DYNAMICAIR function To switch on the function: Press the Mode button until the corresponding icon appears. The DYNAMICAIR indicator flashes. Press the OK button to confirm. The DYNAMICAIR indicator is shown. To switch off the function: Press the Mode button until the DYNAMICAIR indicator flashes. Press the OK button to confirm.
Press the OK button to confirm. The Child Lock indicator is shown. To switch off the function: Press the Mode button until the Child Lock indicator flashes. Press the OK button to confirm. The Child Lock indicator goes off. COOLMATIC function If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the COOLMATIC function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator.
First use Door open alarm An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by: • flashing Alarm indicator • acoustic buzzer When normal conditions are restored (door closed), the alarm will stop. During the alarm, the buzzer can be switched off by pressing any button.
Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi- tioned as desired. For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at dif- ferent heights.
Care and Cleaning warmer settings to allow automatic defrosting and so a saving in electricity consump- tion. Hints for fresh food refrigeration To obtain the best performance: • do not store warm food or evaporating liquids in the refrigerator • do cover or wrap the food, particularly if it has a strong flavour •...
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply.
Page 14
What to do if… Problem The appliance is noisy The appliance does not operate. The lamp does not operate. The lamp does not work. The compressor operates continually. The compressor does not start immediately after pressing the COOLMATIC switch, or after changing the temperature.
Problem The temperature in the refrigerator is too high. Upper or lower square is shown in the temperature Display. dEMo appears on the Display. Replacing the lamp The appliance is equipped with a longlife LED interior light. Only service is allowed to replace the lighting device. Contact your Service Center Closing the door Clean the door gaskets.
Installation INSTALLATION Positioning WARNING! If you are discarding an old appliance that has a lock or catch on the door, you must ensure that it is made unusable to prevent young children being trapped inside. The appliance shall have the plug accessible after installation. Install this appliance at a location where the ambient temperature corresponds to the cli- mate class indicated on the rating plate of the appliance: Climate class...
Green and Yellow: Brown: Blue: As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: Connect the wire coloured green and yellow to the terminal marked either with the letter “E“...
Environmental concerns HISSS! HISSS! SSSRRR! SSSRRR! CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.