Haier HW90-BP14959S6 User Manual
  1. Manuals
  2. Brands
  3. Haier Manuals
  4. Washer
  5. HW90-BP14959S6
  6. User manual

Haier HW90-BP14959S6 User Manual

Hide thumbs
Table of Contents

Quick Links

User manual
Washing machine
HW90-BP14959S6
Table of Contents
loading

Related Manuals for Haier HW90-BP14959S6

Summary of Contents for Haier HW90-BP14959S6

  • Page 1 User manual Washing machine HW90-BP14959S6...
  • Page 3 Thank You Thank you for purchasing a Haier Product. Please read this manual thoroughly before operate the appliance. This manual contains important information on the installation, use and maintenance of the appliance. Keep this manual in a safe and convenient place for future reference.

  • Page 4: Table Of Contents

    Content 1-Safety information....................4 2-Product description....................7 3-Control panel....................... 8 4-Programmes.......................11 5-Daily use......................12 6-Eco-friendly washing ..................17 7-Care and cleaning ....................18 8-Troubleshooting....................21 9-Installation......................24 10-Technical data....................28...

  • Page 5: 1-Safety Information

    1-Safety information Before switching on the appliance for the first time read the following safety instructions! WARNING! Before first use Check the appliance is free from any transport damage. Remove all the transport bolts . Remove and dispose all the packaging materials (plastic bags, polystyrene, etc) and keep out of children’s reach.
  • Page 6 1-Safety information WARNING! Daily use Do not remove or insert the plug in the presence of flammable gas. Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with flour. Do not open detergent drawer during any wash cycle. Do not press the door during the washing precess, it gets hot.
  • Page 7 1-Safety information WARNING! Installation Installor use the appliance only where the temperature is above 5 °C. Do not place the appliance directly on a carpet, or close to a wall or furn- iture. Do not install the appliance in direct sunlight or in the near of heat sourc- es (e.g.

  • Page 8: 2-Product Description

    2-Product description Note: Due to technical changes and different models,the illustrations in the following ch- apters may differ from your model. 2.1 Picture of appliance Front (Fig. 2-1): Rear side (Fig. 2-2): 1 Transportation bolts (T1-T4) 1 Detergent/Softener drawer 2 Backcover Worktop Control panel Backcover screws（7 EA）...

  • Page 9: 3-Control Panel

    3-Control panel “Power” button 3 Display 5 Function buttons 6 “Start/Pause” button 2 Programme selector 4 Detergent / Softener drawer Note : Acoustic signal In following cases an acoustic signal sounds: when pressing a button at the end of program when selecting the program in case of failures The acoustic signal can be deselected if necessary;...
  • Page 10 You may choose more than one function by pressing the buttons sequentially. Note: Factory settings To get best results in each programme Haier has well defined specific default set- c i f ÿ ÿ 3.5.1-Function button “Delay”...
  • Page 11 3-Control panel 3.5.3 Function button “Speed” Touch this button (Fig. 3-9) to change or deselect the spin of the programme.If the display showing “0” the spinning function is not activated ands spinning will not be started. 3.5.4 “Extra Rinse” button 3-10 Touch this button (Fig.

  • Page 12: 4-Programmes

    4-Programmes Detergent compartment for: Detergent Softener or care product Optional, º Max. load Temperature Preset Function spin in kg speed in °C in rpm selectable range Programme Fabric type º º º Cotton º º * to 90 1000 Cotton Lightly soiled mixed- º...

  • Page 13: 5-Daily Use

    5-Daily use 5.1 Power supply Connect the washing machine to a power supply (220-240V/50Hz；Fig.5-1). Please refer also to section INSTALLATION. 5.2 Water connection Check the condition of the water inlet hose before connecting it to the water tap. Tun on the tap (Fig.5-2). Note: Tightness Before use check for leakage in the joints between the tap and the inlet hose by turning on the tap.
  • Page 14 5-Daily use Care chart Washing Washable up to 95°C Washable up to 60°C Washable up to 60°C normal process normal process mild process Washable up to 40°C Washable up to 40°C Washable up to 40°C normal process mild process very mild process Washable up to 30°C Washable up to 30°C Washable up to 30°C...
  • Page 15 5-Daily use 5.5 Selecting detergent Washing efficiency and performance is determined by detergent quality. Use only machine wash approved detergent. If needed use specific detergents, e.g. synthetic and woolen fabric. Mind always detergent manufacturer recommendations. o not use dry cleaning agents such as trichloroethylene and similar products. Choose the best detergent Kind of detergent Universal...
  • Page 16 5-Dai y use 5.6 Adding detergent 1. Slide out the detergent drawer. 2. Put the required chemicals into corresponding compartments (Fig. 5-4). 3. Push back the drawer gently. Note: Remove detergent residues before next wash cycle from the detergent drawer. Do not overuse detergent or softener.
  • Page 17 5-Daily use 5.10 Start wash programme Press “Start/Pause” button (Fig. 5-8) to start. Applia- nce operates according to present settings. Changes are only possible by cancelling the programme. 5.11 Interrupt / cancel wash programme To interrupt a running programme press gently “Start/Pause”. The LED in the button is flashing.

  • Page 18: 6-Eco-Friendly Washing

    6-Eco-friendly washing Environmentally responsible use To achieve best use of energy, water, detergent and time you should use the recom mended maximum load size. Do not overload (hand width clearance above laundry). For slightly soiled laundry select the Quick 15’ programme. Apply exact dosages of each washing agent.

  • Page 19: 7-Care And Cleaning

    7-Care and cleaning 7.1 Cleaning the detergent drawer Clean the drawer regularly to ensure there are no detergent residues. (Fig. 7-1): 1. Pull out the drawer until it stops. 2. Press the re release button and remove the drawer. 3. Flush the drawer with water until it is clean and insert the drawer back in the appliance.
  • Page 20 7-Care and cleaning .5 Long periods of disuse 7-5.1 7-5.2 If the appliance is left idle for a longer period: 1. Pull out the electrical plug (Fig. 7-5.1). 2. Turn off water supply (Fig. 7-5.2). 3. Open the door to prevent formation of moisture and odours.
  • Page 21 7-Care and cleaning 7-6.7 7-6.8 9.Clean carefully pump filter, e.g. using running water(Fig.7-6.7). 10.Refix it thoroughly(Fig.7-6.8). 11.Close Filter cover.ÿ ÿ CAUTION! Pump filter sealing has to be clean and unhurt.If the lid is not full tightened, water can escape. The filter must be in place, or it may lead to leakage.

  • Page 22: 8-Troubleshooting

    8-Troubleshooting Many occuring problems could be solved by yourself without specific expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. WARNING! Before maintenance, deactivate the appliance and disconnect the main plug from the main socket.
  • Page 23 8-Troubleshooting Problem Cause Solution • Contact the After sales service. • Motor error. • Contact the After sales service. • Abnormal communication error. • • Unbalanced load error. Reduce the load. Contact the Af ter sales service. • Water level sensor error. •...
  • Page 24 8-Troubleshooting Problem Cause Solusion Washing programme duration will This is normal and doesn’t af- Automatic adjustment be adjusted. fect functionality. of washing time. Spinning fails. Unbalance of laundry. Check machine load and laun- dry and run a spinning progra- mme again. Degree of pollution does not agree Select an other programme.

  • Page 25: 9-Installation

    9-Installation 9.1 Preparation Take the appliance out of the packaging. Remove all packing material including polystyrene base, keep them out of childr- ns reach. While opening the package, water drops may be seen on plastic bag and porthole. This is nomal phenomenon results from water tests in the factory. Note: Packaging disposal Keep all packaging materials out of children´s reach and dispose them in an environm- entally friendly manner.
  • Page 26 9-Installation by inserting it in the Assemble back the back cover 9-3.3 9-3.4 two gaps its convexity is facing out (Fig. 9-3.3). 4. Fill left holes with blanking plugs (Fig. 9-3.4). Note: Keep in safe place Keep the transportation bolts in a safe place for later use.
  • Page 27 9-Installation 9.6 Drain Water Connection Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 80 and 100 cm above the appliance bottom line! If possible always keep drain hose fixed to the clip at the back of the appliance. WARNING! Use only the supplied hose set for the connection.
  • Page 28 9-Installation 9.7 Fresh Water Connection 9-7.1 9-7.2 Make sure that the gaskets are inserted. 1. Connect the water inlet hose with the angled end to the appliance (Fig. 9-7.1). Tighten the screw joint by hand (Fig. 9-7.2). 9.8 Electrical Connection Before each connection check if: power supply, socket and fusing are appropriate to the rating plate.

  • Page 29: 10-Technical Data

    10-Technical data 10.1 Additional technical data Model Name HW90-BP14959S6 Dimension height 850mm Width 595mm Depth 500mm Power supply 220-240V/50Hz Current Max. power 1900W Water pressure 0.03MPa≤P ≤1MPa Net weight Max. spin speed 1400rpm...
  • Page 32 0020506943VU...

Table of Contents