SJE Rhombus Xpert Alert Operation Manual

Alarm LED

Pairing Button

Signal Strength

Step 1: Installation

Mount and wire the alarm according to the installation instructions.

***Maximum distance between modules should be 200ft.

Step 2: Signal Strength Check

Press pairing button

strength updates.

Reposition the indoor module until 1 or more signal LEDs are illuminated green.

Step 3: Test Alarm

Verify the alarm is functioning by triggering an alarm condition on the outdoor panel and verify the

indoor Xpert Alert® alarm is alarming. Alarm LED on Xpert Alert® RF

will illuminate amber in color when alarming and the audible alarm will sound. For Xpert Alert® WiFi

alarm units, verify a text or email notifi cation of alarm was received.

Monthly Testing

Verify at least 1 or more signal LEDs are illuminated green monthly

are able.

Xpert Alert

Operation Guide

for 1 second on the panel module to enter setup mode for fast signal

RF Alarm

®

and Xpert Alert® alarms

, and repeat step 3 as you