Table of Contents
Before Printing (Continued)
3
Close the tray cover and slide the paper tray into the printer until it clicks into
place.
Notes on storing print paper
• Avoid storing the print paper in a location subject to:
– high temperatures
– high humidity
– excessive dust
– direct sunlight
• Use the original package for storing unused paper.
18
Operation
Printing
Before printing
• Ensure that the printer is properly connected to the computer (page 10).
• Ensure that the combination of the ink ribbon and print paper is correct (pages 14
and 17).
• Ensure that the ink ribbon cassette and print paper are properly loaded (page 30).
i
1
1
Turn on the power of the printer and computer.
When the printer is in standby status, the following message appears in the
printer window display.
RE ADY
A 4 QT Y 1
Notes
• When the printer is connected to the computer through the SCSI bus, turn on
the power of the printer before turning on the computer.
• Never turn the printer on or off while the computer is accessing its hard disk,
floppy disk or another SCSI device.
2
Send the image data from the computer to the printer, then enter the print
command or press the PRINT button of the printer.
For details on UP-D70A, also see the ReadMe file on the supplied CD-ROM.
When your printer is UP-D70, also see the instruction manual of the printer
driver software you are using.
1 While the printer is receiving the image data from the computer, the
following message appears:
The data is written in the memory of the printer.
I MAGE T RANS F ER
>>>
RGB
[
Printer window display
STOP button
2
Paper outlet
The size of the paper being loaded
Number of copies to be printed
]
Indicates the data is being transmitted.
(Continued)
Operation
19
Table of Contents
