Table of Contents
e) Ribbon take-up motor drive
This motor is used to take-up ink ribbon. This motor stabilizes to constant the tension of ink ribbon
by PWM driving. Take-up motor controls only ribbon sending direction by PWM. (CN4-12, 13)
Drive IC is IC104 (MEC-11 board).
FW (Sending direction)
BW (Reverse direction)
BRAKE
OTHERS
f) Ribbon supply motor drive
This motor controls back-tension of ink ribbon. This motor is controlled with PWM (both directions
of ribbon) to stabilize constantly the back-tension of ink ribbon. (CN4-14, 15)
Drive IC is IC103 (MEC-11 board).
FW (Feeding direction)
BW (sending direction)
BRAKE
OTHERS
g) Fan motor drive
Fan motor operates during printing and the time when head cooling is needed. (CN4-16)
h) Take-up/supply ribbon FG sensor (CN5-8, 9)
Function
: These FG sensors detect each rotation of take-up or supply motor.
Level
: Rectangle wave output
Check method : Self diagnosis
i)
PATH 0 sensor (CN5-16)
Function
: This is a mechanism sensor that is placed at rear of feed roller. As this is a
mechanism sensor, this sensor can judge the pass without discrimination of
OHP sheet or ordinary paper. This is composed by photo interrupter and
shutter.
Level
: When passing through the paper, sensor indicates H.
Check method : Self diagnosis
UP-D70XR
CN4-12pin
CN4-13pin
1
PWM
0
1
1
1
0
0
CN4-14pin
CN4-15pin
1
PWM
PWM
1
1
1
0
0
IC106-9pin
IC106-13pin
1
0
0
1
1
1
0
0
IC101-46pin
PWM
PWM
X
0
4-7
Table of Contents
