Table of Contents
6 Maintenance schedule for the service center
1. PREPARE THE PRODUCT
Do a check of the battery.
Do a check of the blades.
Do a check of the belts and pulleys.
Do a check of the steering chain of the inner side of the frame tunnel.
Do an inspection, lubricate and adjust all wires.
Make sure that all screws and nuts are tightened with the correct torque.
Lubricate the operators seat.
Lubricate the wheels and blade bearings on the cutting deck.
Remove the drive wheels and lubricate the axles with grease.
Lubricate the pedals on the inner side of the frame tunnel.
Lubricate the belt tensioner.
2. ENGINE
Do a check of the fuel hose. Replace if it is necessary.
Replace the fuel filter. Refer to
Replace the prefilter and paper filter in the air filter. Refer to
the air filter on page 26 .
Clean the engine and the hydrostatic transmission.
Do an inspection of the cooling fins on the hydrostatic transmission.
Do a check of the muffler and the heat deflector.
Replace the engine oil. Refer to
25 .
Replace the engine oil filter. Refer to
page 25 .
Replace the spark plug. Refer to
26 .
Do a check of the battery and charge if it is necessary.
1592 - 003 - 05.01.2022
To replace the fuel filter on page 28 .
To replace the engine oil and oil filter on page
To replace the engine oil and oil filter on
To examine and replace a spark plug on page
First serv-
icing
First serv-
icing
To clean and change
Maintenance interval
in hours
100 or
50
yearly
O
O
O
O
O
O
O
O
O
O
O
O
O
Maintenance interval
in hours
100 or
50
yearly
O
O
Clean
O
O
O
O
O
O
O
O
O
O
O
O
Maintenance schedule for the
service center - 13
200
200
- Quick Links:
- Belts
Hide quick links:
Table of Contents
