Kathrein ZAS 40 Quick Start Manual

ZAS 40

20410011

ZAS 41

20410012

Rafter fasteners for the sat antennas CAS 06/60/80/90 and KEA 650/750/850/1000

About this guide

This document is part of the product.

► Do not install or use the device until you have read and understood

this document.

► Perform all operating steps described in this manual in the specified

sequence.

► Keep this document for reference throughout the service life of the

device. Pass this document on to any new owner or user.

For the most up-to-date version of this document, go to

www.kathrein-ds.com.

Features

■

TÜV certified for parabolic antennas with a diameter of up to Ø 1 m

■

ZAS 41 for one parabolic antenna

ZAS 41 for one parabolic antenna and an additional VHF antenna

■

Mounting directly from the outside or through the battens onto the

rafter

■

Flexibly adjustable to the gaps between the rafters by means of a

telescopic tube

■

Continuously adjustable for any roof slope (limited only by the cover

plate)

■

Hot-dip galvanised

■

Cable is inserted through mast tip by means of the ZTC 08 (included

in the scope of delivery of the ZTS 40/ZTS 41ro/ZTS 41sw)

■

Designed to withstand lightning current (100 kA, 10/350 µs according

to DIN VDE 0855-300)

Intended use

ZAS 40 and ZAS 41 are rafter fasteners for mounting parabolic antennas with a diameter of up to Ø 100 cm on the roof.

Any other use, or failure to comply with these instructions or documentation and instructions enclosed with the devices, will result in voiding of

warranty or guarantee.

Technical data

Type

Order no.

Length

Diameter

Gaps between rafters

Roof slope

Rafter frame dimensions

Suitable for sat antennas

Suitable mounting accessories

Packing unit

Perm. bending moment

Packing unit/weight, approx.

Mounting sets ZTS 40/ZTS 41ro/ZTS 41sw

●

For securing the rafter fasteners ZAS 4x

●

Consists of:

–

ZTB 61: Lead cover plate (410 x 410 mm)

ZTB 60ro/ZTB 60sw: Aluminium cover plate (500 x 450 mm)

–

ZTC 08: Mast cap for insertion of eight or ten cables

–

ZTC 48: Cover collar (ø 48 mm)

1 / 2

Unit

ZAS 40

20410011

mm

900

mm

48

mm

°

mm

CAS 06/CAS 60/CAS 80/CAS 90, KEA 650/750/850/1000

see „Mounting sets ZTS 40/ZTS 41ro/ZTS 41sw" on page

mm

940 x 190 x 115

Nm

pc./kg

1/6.5

Scope of delivery

●

Rafter fastener

●

6 wood screws 10 x 100 mm

●

Earthing terminal

●

Mast cover

●

4 nuts M10

●

Fastening screw M10 x 20

●

User manual

510 – 900

0 – 90

580 – 980 x 148 x 40

1350 x 190 x 115

700

ZAS 41

20410012

1300

48

1/7.5

The items in the sets are

also available individually.

Please find further moun-

ting accessories under

www.kathrein-ds.com