Table of Contents
All manuals and user guides at all-guides.com
7 Push the inner frame out of the
8 Cut the wires from the motor with
9 Break the battery tags and
Troubleshooting
This chapter summarizes the most
common problems you could
encounter with the appliance. If you
are unable to solve the problem with
the information below, visit
www.philips.com/support for a list
of frequently asked questions or
contact the Consumer Care Center in
your country.
Prob
lem
The
shaver
does not
work as
well as it
used to.
The
shaver
does not
work
when I
switch it
on.
The
shaving
heads
do not
stay in
place in
the
shaving
unit.
housing with the screwdriver (Fig.
30).
pliers (Fig. 31) and remove the
printed circuit board (Fig. 32).
remove the batteries (Fig. 33).
Possible
cause
The
shaving
heads
are
damaged
or worn.
The
shaving
heads
are dirty.
Long
hairs
obstruct
the
shaving
heads.
The
recharge
able
battery is
low.
The
recharge
able
battery is
empty.
The
shaver is
connect
ed to the
wall
socket.
You did
not fix
the
retaining
frames
properly.
The
shaving
heads
with
projec
tions are
not
placed
properly.
Solution
Replace the
shaving
heads (see
'Replacement
').
Clean the
shaving
heads (see
'Cleaning and
maintenance
').
Clean the
shaving
heads (see
'Cleaning and
maintenance
').
Switch off the
shaver and
recharge the
battery (see
'Charging').
Switch off the
shaver and
recharge the
battery (see
'Charging').
This
appliance
can only be
used without
cord. Remove
the supply
unit from the
wall socket
and pull the
small plug
out of the
appliance.
The retaining
frames are
fixed properly
if you hear a
click when
you push it
back onto the
shaving
heads.
Make sure
that the
shaving
heads with
the
projections fit
exactly onto
the hooks of
the shaving
head holder
when placing
them (Fig.
23).
Table of Contents
