Chapter 3: System Planning; Typical Deployment; Odu With Poe Interface To Psu - Cambium Networks PMP 450 Series Installation Manual

Hide thumbs Also See for PMP 450 Series:
Table of Contents
Chap t er 3: Syst em p lanning
This chapter provides information to help the user to plan a PMP/PTP 450 Platform link.
The following topics are described in this chapter:
Typical deployment contains diagrams illustrating typical PMP/PTP 450 Platform site deployments.
l
Site planning describes factors to be considered when planning the proposed link end sites,
l
including grounding, lightning protection and equipment location.
Radio Frequency planning describes how to plan PMP/PTP 450 Platform links to conform to the
l
regulatory restrictions that apply in the country of operation.
Link planning describes factors to be taken into account when planning links, such as range, path
l
loss and throughput.
Planning for connectorized units describes factors to be taken into account when planning to use
l
connectorized ODUs with external antennas in PMP/PTP 450 Platform links.
Data network planning describes factors to be considered when planning PMP/PTP 450 Platform
l
data networks.
Network management planning describes how to plan for PMP/PTP 450 Platform links to be
l
managed remotely using SNMP.
Security planning describes how to plan for PMP/PTP 450 Platform links to operate in secure mode.
l
Remote AP Deployment describes how to deploy Remote AP.
l
Ty p ical d ep lo y m ent
This section contains diagrams illustrating typical PMP/PTP 450 Platform site deployments.
ODU w it h PoE int erface t o PSU
In the basic configuration, there is only one Ethernet interface, a copper cable for Power over Ethernet
(PoE) from the PSU to the ODU (PSU port), as shown in the following diagrams: mast or tower installation
(Mast or tower installation), wall installation (Wall installation) and roof installation (Roof installation).

Chapter 3: System planning

133
Table of Contents
loading

Table of Contents