GE Profile ENERGY STAR WPRE6150K Dimensions And Installation Information

4.1 iec cu. ft. colossal capacity high-efficiency washer

Hide thumbs Also See for Profile ENERGY STAR WPRE6150K:

WPRE6150K

GE Profile

ENERGY STAR

™

Dimensions and Installation Information (in inches)

Circuit Requirements: An individual, properly-grounded branch

circuit, with a three-prong grounding-type receptacle, protected

by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating: 120V, 60Hz, 10A

Note: Washer wall outlet must be located within 36" of service

code entry. Wall outlet must not be located behind dryer.

Installation Information: Before installing, consult installation

instructions packed with product for current dimensional data.

For answers to your Monogram,

GE Profile

appliance questions, visit our website at

ge.com or call GE Answer Center

800.626.2000.

4.1 IEC Cu. Ft. Colossal Capacity High-Efficiency Washer

™

service,

25-1/2

Side View

Rear View

Specification Revised 6/09

Listed by

Underwriters

Laboratories

260189

Page 1 15 or 20 amp circuit breaker or a time-delay fuse, is required. Electrical Rating: 120V, 60Hz, 10A Note: Washer wall outlet must be located within 36" of service code entry. Wall outlet must not be located behind dryer.
Page 2 *Washes equivalent amount of clothes as a similar cu. ft. agitator machine per IEC 60456 Edition 4 • PreciseFill Auto-Load-Sensing Technology - Washer will automatically measure the load size and add just the right amount of water •...