Bosch PRAESENSA Manual page 96
Public address and voice alarm system
Hide thumbs
Also See for PRAESENSA:
- Installation manual (194 pages) ,
- Installation manual (38 pages) ,
- Release notes (24 pages)
Table of Contents
96
en | Installation wiring
To mount a button cap, follow the procedure below:
1.
2.
3.
4.
5.
6.
7.
2021.12.21 | V0.15b | F.01U.402.882
The extension top cover is fixed in place with magnets. Use a screwdriver or tweezers in
the slot of the extension cover plate to lift up the top cover.
Slide the cover upwards to remove it and get access to the buttons.
Translucent light rings are placed in rows of three around the buttons. Use tweezers to
lift and remove the row for the button that should get a cap.
Remove the original light ring by cutting the plastic bridges to the adjacent light rings.
Leave part of the plastic bridges in place around each light ring for better orientation
when it is put back in place.
Insert one of the new light rings with pivot pins in the slot around the button that should
get a cap. The pivot pins must be on top.
Then place the original light rings back around the remaining buttons.
Mount the cover back on the extension body by first sliding the bottom side into the
body, then tilt down until it snaps into place.
Underwriters Laboratories Listing Document (ULLD)
PRAESENSA
Bosch Security Systems B.V.
- Quick Links:
- Installation Wiring
Hide quick links:
Table of Contents
