Huawei UPS5000-H Series Quick Manual
Hide thumbs
Also See for UPS5000-H Series:
- User manual (395 pages) ,
- Quick manual (8 pages) ,
- User manual (222 pages)
Quick Links
01
Installing Cabinets and Cables
1. Before installation, read the user manual carefully to get familiar with product information and safety precautions.
2. Use insulated tools when installing the equipment.
3. Only engineers certified by Huawei or its agent are allowed to install, commission, and maintain the UPS. Otherwise, personal injury or equipment damage
may occur, and the resulting UPS faults are beyond the warranty scope of Huawei.
4. This document describes the installation procedure for a single UPS. For details about how to install a parallel system, contact Huawei technical support.
Installing Cabinets and Cables（400–600 kVA）
Space planning
Unpacking
Securing the Cabinet
UPS5000-H-(400 kVA-800 kVA) Quick Guide (100 kVA Power Modules)
unit: mm
A: mounting holes
on the channel steel
B: mounting holes
on the floor
Model
UPS5000-H-400K-NT
UPS5000-H-500K-NT
UPS5000-H-600K-NT
UPS5000-H-800K-NT
Item
Mains input current (A)
Mains input
Recommended cross-sectional
L1/L2/L3/N
area (mm
2
)
PE
Bypass input current (A)
Bypass input
Recommended cross-sectional
L1/L2/L3/N
area (mm
2
)
PE
Output current (A)
Output
Recommended cross-sectional
U/V/W/N
area (mm
2
)
PE
Nominal battery discharge current (A)
Maximum battery discharge current (A)
Battery input
(lead-acid battery)
Recommended cross-sectional
+/-
area (mm
2
)
PE
Nominal battery discharge current (A)
Battery input
Maximum battery discharge current (A)
(SmartLi)
Recommended cross-sectional area (mm
Equipotential
Recommended cross-sectional area (mm
ground point
Installing Cables
Battery input
Nut
Surge
protection
boxes
Control
(Perform this step only when the
module
mains input and bypass input use
different power sources.) Remove the
copper bars between the mains and
Bypass
bypass input wiring terminals.
module
Power
modules
1
Issue: 03
Part Number: 31500FTV
Date: 2021-08-03
Weight
Dimensions (H x W x D)
< 800 kg
2000 mm x 800 mm x 1000 mm
< 1300 kg
2000 mm x 1600 mm x 1000 mm
400 kVA
500 kVA
600 kVA
800 kVA
743
929
1115
1486
2 x (4 x 240)
3 x (4 x 185)
4 x (4 x 185) 4 x (4 x 240)
240
608
760
912
1215
2 x (4 x 240)
3 x (4 x 185)
4 x (4 x 185) 4 x (4 x 240)
240
608
760
912
1215
2 x (4 x 240)
3 x (4 x 185)
4 x (4 x 185) 4 x (4 x 240)
240
887
1108
1330
1773
1062
1327
1593
2123
2 x (2 x 240)
3 x (2 x 185)
4 x (2 x 185) 4 x (2 x 240)
240
831
1039
1247
1662
1043
1304
1564
2086
For details, see the IEC-60364-5-52 specifications and
2
)
SmartLi User Manual.
)
16
2
Bypass
UPS output
Mains input
input
PE
•
PE
Signal
cable route
Ground bar
in the
•
equipment
room
•
Wiring
terminal
Spring
Monitoring
washer
Interface Card
Bolt
Flat
washer
Ambient
T/H Sensor
Dry Contact
Card
NO connection
Remarks
Connection method:
Crimped DT terminal
Bolt Specifications:
L1/L2/L3/U/V/W/+/-:
M16 x 55 mm (120 N· m)
PE: M12 x 30 mm (47
N· m)
Equipotential ground
point: M6 x 12 mm (4.5
N· m)
NOTE:
The currents listed in
the table are measured
at a rated voltage of
380 V.
Cables of the same group,
for example, mains input
cables, must be routed
through the same cable hole.
Different power sources are
used as an example.
The number and color of
signal cables in the figure are
for reference only.
NC connection
Related Manuals for Huawei UPS5000-H Series
Summary of Contents for Huawei UPS5000-H Series
- Page 1 2000 mm x 1600 mm x 1000 mm 3. Only engineers certified by Huawei or its agent are allowed to install, commission, and maintain the UPS. Otherwise, personal injury or equipment damage may occur, and the resulting UPS faults are beyond the warranty scope of Huawei.
- Page 2 UPS5000-H-(400 kVA-800 kVA) Quick Guide (100 kVA Power Modules) Installing Cabinets and Cables（800 kVA） 全局信息 Installing Cables Unpacking Space Planning (Perform this step only when the mains input and bypass input use different power sources.) Remove the copper bars between the mains and bypass input wiring terminals. Signal cable route Monitoring Interface Card...
- Page 3 LCD and admin (system administrator) 000001 Changeme WebUI passwords after operator (common user) 000001 Changeme the first login. You can also log in to Huawei technical support website: https://support.huawei.com/enterprise https://support.huawei.com Copyright © Huawei Technologies Co., Ltd. 2021. All rights reserved.