1. Manuals
  2. Brands
  3. Zenith Manuals
  4. TV Receiver
  5. Presentation Series
  6. Service manual

Zenith Presentation Series Service Manual

Hide thumbs
Table of Contents

Quick Links

SERVICE MANUAL
Product Type:
Chassis:
Manual Series: SR24
Manual Part #: 923-03509
Model Line:
Product Year:
Printed in U.S.A.
Presentation Series
CS
E
2002
CONTENTS
General Information/Remote Controls ............... 1
Factory Menu ............................................... 2
Servicing/Troubleshooting ............................. 3
Model/Module Parts Lists ............................... 4
Exploded Views ............................................. 5
Schematics ................................................... 6
Published November 2002
by Technical Publications
Zenith Electronics Corporation
201 James Record Road
Huntsville, Alabama 35824-1513
Copyright
2002 by Zenith Electronics Corporation
Model Series:
H27E46DT
H27E46DT8
H32E46DT
H36E46DT
Table of Contents
loading

Related Manuals for Zenith Presentation Series

Summary of Contents for Zenith Presentation Series

  • Page 1 Servicing/Troubleshooting ......3 Model/Module Parts Lists ....... 4 Exploded Views ..........5 Schematics ........... 6 Published November 2002 by Technical Publications Zenith Electronics Corporation 201 James Record Road Huntsville, Alabama 35824-1513  Copyright 2002 by Zenith Electronics Corporation Printed in U.S.A.
  • Page 2 When servicing this product, under no circumstances should the original design be modified or altered without permission from Zenith Electronics Corporation. All components should be replaced only with types identical to those in the original circuit and their physical location, wiring and lead dress must conform to original layout upon completion of repairs.
  • Page 3 Zenith replacement components. age. In this condition, the horizontal drive is “latched” off for After a replacement is made, confirm proper Anode voltage about 5 seconds, after which, restart is attempted.
  • Page 4 - iii -...

  • Page 5: Table Of Contents

    TABLE OF CONTENTS SECTION 1 OVERVIEW SECTION 6 SCHEMATICS OVERVIEW ............. 1-1 AUDIO/VIDEO SWITCH ..........6-1 CONNECTIONS ............1-2 VIDEO CHROMA PROCESSOR ........6-2 CONNECTIONS ..........1-2 VIDEO PROCESSOR ..........6-3 REMOTES ............... 1-6 VIDEO SYNC PROCESSOR ......... 6-4 PROGRAMMING THE REMOTE ......1-7 AUDIO PROCESSOR ..........

  • Page 7: Overview

    JACKPACK The CS series chassis will be used on the E-Line Commer- ICX2201 integrates the luminance signal processing, cial Products. The Presentation Series PC-to-TV monitor Chroma signal processing, and the sync signal. The receivers were designed for educational and business ICX2600 was developed for various types of direction applications.

  • Page 8: Connections

    The connection center on the rear of the TV allows for SUPERPORT - MPI connection of the viewing source. The diagrams on the Zenith Commercial Product receivers are now being next page list the use of each jack on the connection adapted to interact with other equipment. Prime ex- center.
  • Page 9 CONNECTIONS CONNECTION CENTER 5. COMPUTER AUDIO IN These jacks provide left and right audio input that can 1. COMPUTER VIDEO INPUT (HD15) be paired with the computer data input. Standard DB15 receptacle for SVGA input video signal from either PC or Macintosh format. This provides a 6.

  • Page 10: Connections

    CONNECTIONS CONNECTING TO A COMPUTER FORMATS Installed in the certain units is the PCZTV internal scan converter, provided by FOCUS Enhancements, Inc. This Compatible Video Formats allows the receiver/monitor to be used as a large screen Resolution Refresh device to view VGA video output of a PC or Macintosh format computer.
  • Page 11 CONNECTIONS RECORDING THE COMPUTER IMAGE HD DB15 (15 pins aligned If your VCR has an video input jack, the computer im- in three rows) ages can be recorded to video tape. Connect the VCR as described by the illustration on the previous page. DB15 This jack pack provides L/R audio input paired with com- (15 pins aligned...

  • Page 12: Remotes

    REMOTES REMOTE INFO POWER Turns TV On or Off. FLASHBK (Flashback) POWER Returns to previous Channel. MODE CABLE Selects the remote's mode of operation SURF MUTE SURF MUTE Turns Surf Channel On/Off FLASHBK Turns sound Off and On while picture remains. CHANNEL VOLUME (Left/Right) CHANNEL (Up/Down)

  • Page 13: Programming The Remote

    (instead of the TV’s) if available on your 201, CABLE = 353, and AUX = 401. For other brands, or equipment. if your remote fails to control your Zenith products, you’ll 1. Program the cable/converter box normally. have to program the remote.
  • Page 14 Universal 325,358,362 Goldst ar TV/ VCR 153,172 286,287,288, Vid Tech Sony 420,443,444, Symphonic TV/ VCR 708,710,711, Video Way 445,934 Zenith TV/VCR 150,153,154 Viewstar 327,354,355, Soundesign 461,498,901, Realistic 212,213,265, Zenit h HT-2000 Sylvania V C R 's Saisho Zenit h PM...

  • Page 15: Quickset Ii Programmer

    REMOTE INFO NOTE: A slowly flashing green light indicates there is a problem with the communications between Status TV and programmer. In this case, check for Indicator damaged cable, poor contacts, or other connection problems. If the status indicator is red, the programmer batteries are low.
  • Page 16 REMOTE INFO Using the on-screen menu, select a memory or return The TV screen will display the memory selection menu. to the main selection menu. Then press ON/OFF, POWER, Select the desired memory number, and then press ON/ or ENTER to activate the selection. OFF, POWER, or ENTER to display the contents of the selected memory.

  • Page 17: User Menus

    USER MENUS USER MENUS 905-10533 SETUP MENU CHANNEL ADD/DEL/BLNK After running the Auto Program, all channels found by The Setup Menu and all of the options for Presentation the Auto Program feature will be marked as ‘Added’ . Chassis are described below. However, some of these channels may be scrambled, or Note: This menu is not available while the set is in undesired by the customer.
  • Page 18 USER MENUS 905-10533 Notes: • Any changes done to a label are stored even if another keystroke occurs. For example if the customer is • When the “- - - -” label is selected, then the Auto programming a label and the first 3 letters are entered channel label is activated, in other words, the program and accidentally the ENTER key is pressed or the Menu automatically takes the channel label of the signal...

  • Page 19: Audio Menu

    USER MENUS 905-10533 ALARM If 2 Audio/SAP is selected, but the current channel does not support SAP, then either Stereo or Mono will be If the factory menu item Alarm is set to 1 the Alarm heard. feature is activated. SOUNDRITE The SoundRite feature is used to obtain a uniform volume SETUP MENU...

  • Page 20: Parental Control

    USER MENUS 905-10533 COLOR Use the Left/Right Arrow keys to select the Age Block Menu. Color adjustment also has 64 steps (0 to 63). TINT Tint Adjustment has 64 steps (0 to 63). A center mark AGE MENU indicates step 29. SHARPNESS GENERAL UNBLOCKED...
  • Page 21 USER MENUS 905-10533 To block the dialog, use the Left/Right arrow keys to RE-ENTERING PARENTAL CONTROL MENU select either: Unblocked, TV-PG AND ABOVE, TV-14 AND If the Parental Control feature has been activated, the ABOVE, or TV-MA. software will not allow immediate entry into the Parental Control Menu.

  • Page 22: Source Menu

    USER MENUS 905-10533 CH 4 3:35 PM MONO SOURCE FRONT COMPUTER SVGA PRESS: Parental Lockout Is Active SOURCE TO CHANGE SOURCE 01:23 Hours Remaining ENTER TO SELECT SOURCE To select a Source, press the Source Key and source menu SOURCE MENU appears (as shown below) showing the present source.
  • Page 23 USER MENUS 905-10533 CH 14 HBO CH 4 HBO 3:35 PM 3:35 PM MONO MUTED MUTE WITHOUT CHANNEL DISPLAY FUNCTION NOT AVAILABLE DISPLAY When the mute key is pressed and channel display is When the Time has not been set yet, and the customer off, the following display appears: wants to enter the Alarm Menu, there will be an error notification stating that the function is not available.

  • Page 24: Video Source Input

    USER MENUS 905-10533 keys. Same as the Video Menu for a RF signal. This feature allows the customer to maintain two separate Contrast, Brightness, Color, Tint, and Sharpness settings “Custom” and “Preset”. The factory sets the “Preset” setting and the customer sets “Custom”. The PRESET and CUSTOM settings are selected using the Left/ Right Arrow keys.

  • Page 25: Computer Source Input

    USER MENUS 905-10533 This option enables the captions when the TV is muted. or 4 steps up from the value set in the Factory Item 153 GREEN DRIVE SVGA. CAPTION LOCK If this factory menu item is set at 30, the Green This option stores the caption configuration in EEPROM.
  • Page 26 USER MENUS 905-10533 Remote Functions Limits of Settings KEY NORMAL MODE MENU MODE ZOOM MODE SETTING RANGE Out h-Centre 65 to 85 1 Enter Zoom Mode N/A Cancel Zoom Mode Out H-Width 80 to 120 2 N/A Pan Up Out V-Centre 107 to 232 for NTSC, 300 to 400 for SVG 3 Compress On/Off Compress On/Off...

  • Page 27: Service Menu

    SECTION 2 SERVICE MENU AC power. SERVICE MENU • Auto off enabled: The Auto Off feature is always enabled, Access the Installer’s Menu by using the remote control or the keyboard on the front of the set. With the remote: regardless of the state of the “Auto OFF”...
  • Page 28 12 Strt Vol: When active, this fuction allows you to de- 24 Feature Level: Set to 1 to see Zenith Code, when set termine the initial volume level setting when the TV is to 0 Private Codes are shown.

  • Page 29: Factory Menu Items

    SERVICE MENU (continued) FACTORY MENU ITEMS 50 Trap on: Y system chroma trap ON/OFF. Range 0-1, 0 = 31 Mute time: Time during the TV stays in blank state OFF, 1 = ON. when Real Time= Mute Time * lbms the switching is 51 Tot on: Chroma TOT filter ON/OFF.
  • Page 30 SERVICE MENU (continued) 65 Ycbcr/MAT: Selection of IN1 system signal or SELIN 78 Clp-Msk: Switching of clamping pulse width in vari- system signal for signal sent to Y color difference pro- ous ways (refer to description of H-WIDTH register) cessing system. H and V sync signals are simultaneously Gating at one of the SCP CLP pulses widths listed be- selected and output.
  • Page 31 SERVICE MENU (continued) 90 Cr offset1: For canceling the offset between CrCb of 102 Lrgb2-Level: LRGB2 system picture level control. IN1 and SELIN systems. Range: 0-15, 0 = -10 mV, 7 = Range: 0-15, 0 = -5 dB, 15 = 0 dB. 0 mV, 15 = +12 mV.
  • Page 32 SERVICE MENU (continued) 134 V_Para2_Dc: General-purpose V parabola 2 DC bias 0 = -12.7% HBLK width maximum control. Range: 0-63, Fixed Value: 31. 31 = -7.7% Center 63 = -27.7% HBLK width minimum 135 V_Para2_Phase: General purpose V parabola 2 SAW component amplitude control.
  • Page 33 SERVICE MENU (continued) 176 V_Bow: Same description as item 123. 150 Jmp_Sw: Reference jump mode ON/OFF. Range: 0-1, Fixed Value: 00. 177 H_Comp: Same description as item 124. 151 Vscroll: Vertical picture scroll control. Range: 0-63, 178 Fhadj: Same description as item 125. Initial value: 31.

  • Page 34: Factory Menu Tables

    SERVICE MENU (continued) FACTORY MENU TABLES ITE M R A N G E H 2 7 E 4 6 D T H 3 2 E 4 6 D T H 3 6 E 4 6 DT 00 FA C T M E N U 01 PRE S E T PX 02 PRE S E T A X 03 PO WE R M A N A GE...
  • Page 35 SERVICE MENU (continued) ITE M R A N G E H 2 7 E 4 6 D T H 3 2 E 4 6 D T H 3 6 E 4 6 D T 51 TO T O N 52 Y D RIVE 0-31 53 S HP-FO 5 4 C D M O D E 2...
  • Page 36 SERVICE MENU (continued) ITE M R AN G E H 2 7 E 4 6 D T H 3 2 E 4 6 D T H 3 6 E 4 6 D T 101 G-Y /B 0 -15 102 LRGB 2-LE VE L 0 -15 103 GA M M A 0 -15...
  • Page 37 SERVICE MENU (continued) ITE M R AN G E H 2 7 E 4 6 DT H 3 2 E 4 6 DT H 3 6 E 4 6 D T 151 V-S C RO LL 0 -63 152 M A X - LIN E 70 -200 153 V-FRO N T-B LK 0-127...
  • Page 38 SERVICE MENU (continued) ITE M R AN G E H 2 7 E 4 6 DT H 3 2 E 4 6 DT H 3 6 E 4 6 D T 20 1 V-FRO N T-B LK 0-127 20 2 V-B A C K-B LK 0-127 20 3 N O N IN TE R 0 -1...

  • Page 39: Circuit Overview

    SECTION 3 CIRCUIT OVERVIEW CIRCUIT OVERVIEW • CHASSIS OVERVIEW Y1-IN: This is the luminance input of the Y/C (super video) connector and is fed to the A/V CONNECTIONS switch through pin 15 (YinS2). This chassis has two means of A/V connectivity, one •...

  • Page 40: Video Processing

    CIRCUIT OVERVIEW (continued) • INTEGRATED CIRCUITS Two signals, F0 and FH_STATUS, use the deflection circuit to switch the frequency of ICX2201 is a chroma decoder. It receives luminance and the deflection circuit between 15KHz and chroma signals and decodes them to YUV video with 37.9KHz.
  • Page 41 CIRCUIT OVERVIEW (continued) COMB-FILTER CIRCUIT BAND PASS FILTER C2410M C2408M To AV Switch From Comb filter 1000pF 220pF C2409M L2402 62pF R2414M Q2902 6.8uH 121-1310A R2415M Q2401 R2412M C2407 121-1310A YinS1 10pF R2413M R2409M C2410M CinS1 R2410M VIDEO OUTPUT BOARD C2408M 1000pF 220pF...
  • Page 42 CIRCUIT OVERVIEW (continued) The input signal is connected to the inverting input of Video output current is delivered by a quasi- the amplifier through resistor R5121 to avoid Hi complementary class A/B push-pull stage designed in frequency oscillations. The non-inverting input is DMOS technology which can source and sink a current connected to a voltage bias formed by resistors R5101 of 100mA for video output voltages of 125Vp-p.

  • Page 43: Audio Processing

    CIRCUIT OVERVIEW (continued) ABL CIRCUIT ABL (Automatic Blanking Level) and ACL (Automatic AKB Circuit Contrast Level) are circuits designed to protect the CRT against over-current of electron beams that will burn 9 11 the screen phosphors. Both circuits limit the current a.c.

  • Page 44: Power Supply

    CIRCUIT OVERVIEW (continued) At the front jackpack one pair of audio jacks is used You can choose among the following inputs: Antenna/ with both the Computer and Aux. Video inputs. (If both Cable, Aux Video, S-Video, Front Computer/Video, and video inputs are in use the Aux. Video is selected as Rear Computer SVGA/Rear Computer NTSC.
  • Page 45 CIRCUIT OVERVIEW (continued) SWITCH MODE REGULATOR The voltage output of the rectifier (150VDC) is supplied to the Main Switch Mode Regulator Power Supply (SMPS) This chassis has a switching power supply (quasi- & Standby Switch Mode Regulation Power Supply. Its resonant topology type).

  • Page 46: Deflection And High Voltage

    CIRCUIT OVERVIEW (continued) DEFLECTION AND HIGH VOLTAGE HORIZONTAL DEFLECTION AND HV GENERATION The Horizontal Deflection circuitry is a common flyback OVERVIEW type used in many television and monitor applications. The principal function of the Deflection and HV circuits QX3200 is the Horizontal Output Transistor. When QX3200 is to supply horizontal and vertical currents to the is initially turned on, current is allowed to flow from deflection yoke coils, and the high voltage generation.
  • Page 47 CIRCUIT OVERVIEW (continued) When QX3200 is turned off, about 1100 Volts peak of Pulse width modulation control is achieved by IC4100. flyback voltage is produced from the stored energy in It’s function is to modulate the pulse width output at the horizontal deflection coils and T3201.
  • Page 48 CIRCUIT OVERVIEW (continued) One of the operational amplifiers of IC4100 (pins 1,2, Current from H-DRV is amplified by transistor Q4002 & 3) provides the error voltage needed to regulate the and Q4003, providing a low impedance to rapidly drive B++ output voltage to a specified level. This voltage is the gate of the drive transistor, Q4004.
  • Page 49 CIRCUIT OVERVIEW (continued) SHUTDOWN CIRCUIT OPERATION The error voltage is compared with a ramp signal generated in one comparator of IC2900 and The flyback pulse voltage from pin 6 of T3201 (Flyback synchronized by the flyback pulse (H-FLYBK) at Transformer) is peak detected (rectified) by the action Horizontal Scanning Frequency.

  • Page 50: Purity & Convergence Setup Procedure

    ADJUSTMENTS PURITY & CONVERGENCE SETUP PROCEDURE PRELIMINARY SETUP a. Adjust the 4 pole static control by moving the two 1. Allow receiver to warm up for 15 to 20 minutes. tabs separately to converge red and blue lines hori- zontally. Move the two tabs together around neck of 2.

  • Page 51: Adjustments

    ADJUSTMENTS ADJUSTMENTS IMPROVING CRT CORNER PURITY CRTs that display corner purity problems even after VERTICAL-TILT WEDGE ADJUSTMENT following the service procedures can be modified with The vertical lines at 6 and 12 o’clock are converged by a picture correction kit (P/N 949-50). The purity can vertically tilting the yoke and inserting a wedge at the be improved by placing a picture-correction magnet top of the yoke until it is firmly seated between the...

  • Page 52: Ic Descriptions

    IC DESCRIPTIONS IC DESCRIPTIONS IC6000 221-01391-P07 MAIN MICRO H-SYNC > > HSYNC P52/R > > R V_SYNC > > VSYNC P53/G > > G AFC > > P40/AD4 P54/B > > B V-DET > > P41/INT2 P55/OUT1 > > FB H-DET>...
  • Page 53 IC DESCRIPTIONS I/O2 Cin2 Mute GND2 Cout2 CinS3 Rout2 RinS3 Yout2 YinS3 Lout2 LinS3 Vout2 VinS3 CLAMP2 Yin2 CinS2 RoutD RinS2 ICX2900 Cin1 YinS2 221-01053 LoutD LinS2 Cout1 VinS2 Rout1 GND1 Yout1 CinS1 Lout1 RinS1 Vout1 YinS1 CLAMP1 LinS1 Yin1 VinS1 RinE3 RinE1...
  • Page 54 IC DESCRIPTIONS I/O2 Cin2 Mute GND2 Cout2 CinS3 Rout2 RinS3 YinS3 Yout2 Lout2 LinS3 Vout2 VinS3 CLAMP2 Yin2 CinS2 RoutD RinS2 ICX2900 Cin1 YinS2 221-01053 LoutD LinS2 Cout1 VinS2 Rout1 GND1 Yout1 CinS1 RinS1 Lout1 Vout1 YinS1 CLAMP1 LinS1 Yin1 VinS1 RinE3 RinE1...
  • Page 55 IC DESCRIPTIONS BASSL2 BASSL1 TRE-R BASSR2 TRE-L BASSR1 SURRIN SURRTC SURROUT TVOUT-L LSOUT-R TVOUT-R LSOUT-L AUX2-L AUX2-R AUX1-L AUX1-R DGND VLTC VLDC IC1400 MAININ VCAWGT 221-01127 MAINOUT VCATC VCAIN PCINT1 VEOUT PCINT2 VETC PLINT VEWGT COMPIN SAPIN IREF SAPOUT NOISETC SAPTC STIN SUBOUT...
  • Page 56 IC DESCRIPTIONS V1-IN B-SH H1-IN B-OUT CR1-IN G-SH CB1-IN G-OUT Y1-IN R-SH GND-SIG R-OUT IREF-YC GND-OUT ICX2200 Vcc-SIG HP-IN 221-01376 SELCR-IN VTIM-IN SELCB-IN SCP-IN SELY-IN Vcc-OUT SELY-OUT HS-OUT SELCB-OUT VS-OUT SELCR-OUT IREF-SYNC SELH-OUT YG-IN SELV-OUT YG-OUT 3-18 SR23 - 923-03509 CS - SERVICING...

  • Page 57: Video Processor

    IC DESCRIPTIONS SGND V OUT U OUT A PED Y OUT CVBS/Y IN SGND2 ICX2201 Address 221-01377 H TIM VIDEO PROCESSOR V TIM V SYNC V2 IN H SYNC U2 IN Y2 IN V HOLD 3-19 SR23 - 923-03509 CS - SERVICING...

  • Page 58: Video Sync Processor

    IC DESCRIPTIONS FO_TC HIREF Vcc1 AFC1 HSYNC ICX2600 P,M_BW 221-01378 SLOPE VIDEO SYNC. PROCESSOR GND1 HSAVYO HSAW2 HSAW1 AFC_IN 3-20 SR23 - 923-03509 CS - SERVICING...

  • Page 59: Model Parts

    Module, Video Output P O Box 240007 014-12284-P33 Cabinet Front Huntsville, AL 35824-6407 014-12285-P10 Cabinet Rear 020-04330-33 Coil, Degausser MODEL PARTS 030-01532-01 Decorative Item, Logo, Zenith 124-00233-04 Space Command Transmitter, MBR3447C H27E46DT 152-00335-01 Wedge, CRT Spacer Item Description 192-00916 Lens, IR 009-02097...
  • Page 60 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION Model SRD’s Item Description DEFLECTIO;...
  • Page 61 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD C1216M 022-08366-28 CAP;...
  • Page 62 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION NONPLZD ELECTROLYTIC ABCD C2201 022-08312-03A CAP;...
  • Page 63 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ELECTROLYTIC, 1 SECT ABCD C2260M 022-08368-20A CAP;...
  • Page 64 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD C2405M0 022-08352-31A CAP; 62 PFD 5% 50V; DD CHIP ABCD C2406M 022-08366-08A CAP;...
  • Page 65 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD C2916 022-08156-12A CAP; 10 MFD 20% 50V; ELECTROLYTIC, 1 SECT ELECTROLYTIC, 1 SECT ABCD C2952...
  • Page 66 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION CERAMIC CHIP ABCD C4121 022-07958-48 CAP;...
  • Page 67 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION CERAMIC DISC CERAMIC CHIP, LDLESS ABCD C4824 205-00613 ADHESIVE;...
  • Page 68 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD C6009 022-08049-24A CAP; 0.10 MFD 10% 50V; CERAMIC CHIP, LDLESS POLYESTER ABCD C6030M...
  • Page 69 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD C6056M 022-08368-20A CAP; 10,000 PFD 10% 25V; 2.5MM;...
  • Page 70 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION CX3204 022-08231-08 CAP; 0.22 MFD 5% 200V; ELECTROLYTIC, 1 SECT POLYPROPYLENE ABCD CX3420...
  • Page 71 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD D2103 103-00344-06A DIODE; LOW VOLTAGE COND GENERAL;...
  • Page 72 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION D4808 103-00295A DIODE; LOW VOLTAGE, SILICON ABCD DTP3 058-00586-02 PLUG;...
  • Page 73 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD EX3400 P038-00108-01 SPARK GAP; HIGH VOLTAGE, ABCD IC4100 221-00345-01 INTEGRATED CKT;...
  • Page 74 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION DRIVER FIXED ABCD ICX2900 221-01053 INTEGRATED CKT;...
  • Page 75 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD L4100 020-04547 COIL;...
  • Page 76 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD Q3202 126-03754-P02 HEAT SINK; TRANSISTOR; ABCD Q6001 121-01310A TRANSISTOR;...
  • Page 77 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD R1204M 063-11059-65A RESISTOR; THICK FILM; 4.7K OHM 5% 1/10W OHM 5% 1/10W ABCD R1231M 063-11059-25A RESISTOR;...
  • Page 78 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION OHM 5% 1/10W ABCD R1456M 063-11059-73A RESISTOR;...
  • Page 79 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION SLEEVING; 1/4W ABCD R2200M 063-11059-41A RESISTOR; THICK FILM; 470 ABCD R2224M 063-11059-25A RESISTOR;...
  • Page 80 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD R2249M 063-11059-25A RESISTOR; THICK FILM; 100 ABCD R2272 063-10235-35 RESISTOR;...
  • Page 81 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT ABCD R2619M0 063-11060-15A RESISTOR; THICK FILM; 560K OHM 5% 1/10W NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. ABCD R2621M0 063-11059-59A RESISTOR;...
  • Page 82 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT ABCD R2921 063-10235-96 RESISTOR; FILM; 10K OHM 5% 1/4W NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. ABCD R2922 063-10235-82 RESISTOR;...
  • Page 83 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD R2938M0 063-11059-51A RESISTOR; THICK FILM; 1.2K 1/4W OHM 5% 1/10W ABCD R2955M 063-11059-22A RESISTOR;...
  • Page 84 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD R3201 063-10235-96 RESISTOR;...
  • Page 85 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD R4112 063-10236-44 RESISTOR;...
  • Page 86 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION 1/4W ABCD R5122M 063-11059-49A RESISTOR; THICK FILM; 1K OHM 5% 1/10W R4834 063-10235-80...
  • Page 87 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION 1/4W OHM 5% 1/10W ABCD R5170 063-10235-40 RESISTOR;...
  • Page 88 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD R6043M 063-11059-33A RESISTOR; THICK FILM; 220 ABCD R6090 063-10235-56 RESISTOR;...
  • Page 89 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION RX3208 063-10559 RESISTOR; FILM; 1 OHM 5% 1/ ABCD RX3424 063-11168-92B RESISTOR;...
  • Page 90 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION 1/2W RX4820 063-11156-80B RESISTOR; FILM; 2.2K OHM 5% ABCD RX3453 063-10932-37 RESISTOR;...
  • Page 91 COMPONENT PARTS LIST A = H27E46DT C = H32E46DT B = H27E46DT8 D = H36E46DT NOTE: This list will enable you to easily determine the parts used on each Model, Chassis, or Assembly. PART# DESCRIPTION PART# DESCRIPTION ABCD ZD1403 103-00279-18A DIODE; ZENER; 9.1V 0.5W ABCD ZD1404 103-00279-18A DIODE;...

This manual is also suitable for:

H27e46dtH27e46dt8H32e46dtH36e46dt

Table of Contents