WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.
IMPORTANT NOTICE User's Guide Contents: Install Autodesk DWF Viewer Internet Explorer Settings Operating Environment Functions Provided on Each Drawing Page Using with Network Install Autodesk DWF Viewer Autodesk DWF Viewer is necessary to view drawings and to activate the functions of this system. Please download and install.
Page 4
for Internet Explorer 7 for Windows Vista...
Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended Mouse : A mouse with wheel recommended : Microsoft Windows 2000 SP4 / XP / Vista Browser Microsoft Internet Explorer 6.0 / 7.0 Drawing viewer : Autodesk DWF Viewer 6.0 / 7.0 * Use the software following respective license terms and conditions.
Page 6
ZEUS Engine Program Ver.2 and ZEUS Service Manual Ver.2 are to be modified. Perform the procedure described below. Preparation 1. Run the program file zuesFPch.exe to install the program file for File-Path to the Local PC. -> Download zeusFPch_setup.zip (2.3MB) 2.
Page 7
1. Whenever changing the file-path of both ZEUS Engine Program and ZEUS Service Manual to use with network, pay the attention to set the "Exchange to" column that should have a proper relation between ZEUS Engine Program and ZEUS Service Manual with referring the following. Run the zeusFPch and set "Exchange to"...
Page 8
4. Run the ZeusFPch to change the path in the ZEUS Service Manual Ver2. 5. Set unzipped ZEUS Service Manual in the created folder in the server to the "Target Folder", and then press "START". (This procedure is required whenever placing service manual.) Confirmation Confirm that service manual on the server can be operated normally by client PC.
Page 9
Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.
LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.
SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
10. Touch current check. (After completing the work, measure touch current to prevent an electric shock.) Plug the AC cord directly into the AC outlet. Do NOT use an isolation transformer for this check. Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth ground such as a water pipe.
Page 14
characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual and its supplements; electrical components having such features are identified by the international hazard symbols on the schematic diagram and the parts list.
SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 16
result in discoloration or stripes. Immediately remove any type of fluid from the screen. 5. Glass is used in the panel, so do not drop or strike with hard objects. Such actions can damage the panel. 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity.
Page 17
10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity.
Page 18
FOR 42" CN403 CN401 LCD PANEL MEMC T-COM Board CN404 30P or 51P/1.25mm FOR 26"/32" CN903 CN902 CN128 POWER CN408 POWER Power Board Inverter Main Board Board VOL+ VOL- VOL+ MENU VOL- SOURCE MENU SOURCE TUCH SPEAKER SPEAKER CN100 FOR 26"/32" FOR 42"...
Page 19
IFS P/N IFT P/N For 26"/32" IF P/N TV To Panel TU101 Tuner U610 IFC P/N ENV57S01D8F TS IN DVB-C U401 For 42" FHD Si2163 MT8282AGG TS In DATA/ADDR PCMCIA U405 TS Out U402/U403 DDR2 DDR2 32MB x 16 Side I/O 32MB x 16 CVBS CVBS2...
FIRMWARE UPDATING APP code download sequence (using USB flash disk) 1. Copy APP code upgrade.pkg to USB flash disk (root folder). Figure 1 USB flash disk 2. Plug USB flash disk into TV. Figure 2 Plug USB Flash Disk into TV 3.
Page 53
Figure 5 Unplug USB flash disk 6. Press "MENU" button, then press "1001" on the remote control to check firmware version. Figure 6 Check firmware version...
Page 54
TECHNICAL BULLETIN File Name Title issuing date...
PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" "PRODUCT SAFETY NOTICE". CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 57
PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" "PRODUCT SAFETY NOTICE". CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 58
PARTS LIST ↓Select Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. :...
Page 59
Block : Block Location Parts No. Description Electric Parts E200 75022500 PC BOARD ASSY, MAIN WITH FW, 26SL738G, CBPFA4ABA7 Electric Parts E250 75022486 PC BOARD ASSY, POWER, 26SL738B, ADTVA2405AAF Electric Parts E260 75022252 PC BOARD ASSY, KEY, 22SL700A, KEPFAAA5 Electric Parts...
Page 60
Parts No. : Block Location Parts No. Description Electric Parts E200 75022500 PC BOARD ASSY, MAIN WITH FW, 26SL738G, CBPFA4ABA7 Electric Parts E250 75022486 PC BOARD ASSY, POWER, 26SL738B, ADTVA2405AAF Electric Parts E260 75022252 PC BOARD ASSY, KEY, 22SL700A, KEPFAAA5...
Page 61
PARTS LIST Accessory Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Accessory E400 75014827 REMOCON HAND UNIT, CT-90326 Accessory E410 75022327 DFU ASSY, 32SL738B, 705TZA4177A Accessory E415 75022489 BASE SCREW ASSY, 705GZACS021 Accessory E416...
Page 62
PARTS LIST Cabinet Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Cabinet E100 75022262 FRONT BEZEL ASSY, 26SL700A, 705TZA34225 Cabinet E110 75022483 BACK COVER ASSY, 26SL738B, 705TZA34226 Cabinet E112 75022410 SCREW, (BC TO FB), 0Q1T_940_10_47_CR3...
Page 63
PARTS LIST Packing Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Packing E500 75022274 CARTON BOX, 26SL700A, Z44GE018001 Packing E510 75022275 CUSHION, TOP LEFT, 26SL700A, Z44GE010101 Packing E511 75022276 CUSHION, TOP RIGHT, 26SL400A, Z44GE010201 Packing...