Table of Contents
Slot
Fente
Ranura
To Reinstall
To Remove
Pour enlever
Pour réinstaller
Para quitar
Para reinstalarse
Cleaning Agitator
Replacing Headlight Bulb
Light Lens
Lentille de la
lampe
Lentes de luz
- 32 -
➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ ➢ Reinstall agitator and lower plate.
➢ ➢ Disconnect power cord from
electrical outlet.
➢ ➢ Pry out light lens at slot by inserting
screwdriver into slot, pushing down
on the lens and rotating the
screwdriver handle toward unit.
➢ ➢ Remove the light bulb by pulling
straight out.
CAUTION
Do not use a bulb rated over 9W (15V).
During extended use, heat from the bulb
could overheat surrounding plastic parts.
➢ ➢ To replace the light bulb carefully
insert securely into slot. Replace lens
cover by inserting tabs.
➢ ➢ Secure light lens by snapping into
place.
Table of Contents
