Easy Setting; Remote Control Setting - Panasonic DMP-BD10K Operating Instructions Manual

After connecting your new player and pressing the power button, a screen will appear prompting you to perform setup for the basic settings.

Please follow the guide and perform setup.

Preparation

Turn on the television and select the appropriate video input on the

television.

Press [

BD POWER].

Setup screen appears.

Follow the on-screen instructions and make

the settings with [ ,

"On-screen Language", "TV Aspect" and "Speaker" are set.

You can also change their settings individually ( "Display"

and "Connection" tab ➡ 22).

Setting the television operation

You can configure the remote control TV operation buttons to turn the television on/off, change the television input mode, select the television

channel and change the television volume.

Point the remote control at the television.

While pressing [RETURN], enter the code with the numbered

buttons.

e.g., 01: [0] ➡ [1]

Test by turning on the television and changing channels.

Manufacturer and Code No

Panasonic

National

01/02

QUASAR

FISHER

10

GE

05

GOLDSTAR

15/16/17

HITACHI

12

JVC

11

LG

15/16/17

MAGNAVOX

03

MITSUBISHI

13

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close

together. Use "1", the factory set code, under normal circumstances.

Press [SETUP].

Press [ ,

] to select "Setup" and press [ ].

Press [ ,

] to select "Remote Control Code" and press

[ENTER].

Press [ ,

] to select the code (1, 2, or 3) and press [ENTER].

Remote Control Code

Setup

Press " n " and "ENTER" together

for more than 2 seconds on the remote.

Setup

Disc

To change the code on the remote control

While pressing [ENTER], press and hold the numbered button ([1],

[2] or [3]) for more than 2 seconds.

Press [ENTER].

Getting started

,

,

] and [ENTER].

PHILIPS (RC-5)

03

RCA

05

14/18/19

SAMSUNG

SANYO

10

SHARP

06/07

SONY

08

SYLVANIA

03

THOMSON

05

TOSHIBA

09

ZENITH

04

Easy Setting / Remote control setting

You can perform this setup

anytime by selecting "Easy

Setting" in Setup menu

TIPS

(➡ 21,"Setup" tab).

ENTER

If your television brand has more

than one code listed, select the

one that allows correct operation.

NOTE

If your television brand is not listed

or if the code listed for your

television does not allow control of

your television, this remote control

is not compatible with your

television. Use the television's

remote control.

When the following indicator

appears on the unit's display

and you are unable to operate

NOTE

the unit

The unit's remote control code

Press and hold [ENTER] and the

indicated number button at the

same time for more than 2

seconds.

D

R

RQT8745

11