Honeywell TURBO FORCE HT-900V3 Owner's Manual

Owner's Manual

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE SAFETY

INSTRUCTIONS BEFORE USING THIS FAN

When using electrical appliances, basic

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

FOR US MODELS ONLY - This product employs

overload protection (fuse). A blown fuse

indicates an overload or short-circuit situation.

If the fuse blows, unplug the product from

the outlet. Replace the fuse as per the user

servicing instructions (follow product marking

for proper fuse rating) and check the product. If

the replacement fuse blows, a short-circuit may

be present and the product should be discarded

or returned to an authorized service facility for

examination and/or repair.

1.

Use this fan only as described in this manual.

Other use not recommended, may cause fire,

electric shock or injury to persons.

2.

This product is intended for household use ONLY

and not for commercial, industrial or outdoor use.

3.

To protect against electric shock, do not place

fan in window, immerse unit, plug or cord in

water or spray with liquids.

4.

This appliance has a polarized plug (one blade

is wider than the other). To reduce the risk of

shock, this plug is intended to fit only one way in

a polarized outlet. If the plug does not fit fully in

the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Do Not attempt to

defeat this safety feature.

5.

Close supervision is necessary when any

appliance is used by or near children.

Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.

Honeywell International Inc., makes no representation or warranties with respect to this product.

Turbo Force is a registered trademark owned by Helen of Troy Limited.

TURBO FORCE

HIGH VELOCITY

AIR CIRCULATORS

HT-900 Series, HT-908 Series

and HF-910 Series

6.

Turn the fan to the OFF position and unplug

the fan from the outlet when not in use, when

moving the fan from one location to another

and before cleaning.

7.

To disconnect the fan, first turn control to

the OFF position, grip the plug and pull it

from the wall outlet. Never pull by the cord.

8.

Do not operate the fan in the presence

of explosive and/or flammable fumes.

9.

Do not place the fan or any parts near an open

flame, cooking or other heating appliance.

10. Do not operate fan with an extension cord or

power strip.

11. Do not operate the fan with a damaged cord or

plug or if the product malfunctions, is dropped

or damaged in any manner (see warranty).

12. Avoid contact with moving fan parts.

13. The use of attachments not recommended

by the manufacturer may be hazardous.

14. Place the fan on a dry level surface.

15. Do not hang or mount fan on ceiling. HF-910,

HT-908 Series cannot be wall mounted.

16. Do not operate if the fan housing is removed

or damaged.

17. A loose fit between the AC outlet (receptacle)

and plug may cause overheating and a distortion

of the plug. Contact a qualified electrician to

replace loose or worn outlet.

18. Do not operate any fan with a damaged cord

or plug. Discard any damaged fan, or return the

fan to the retailer where the fan was purchased,

or request a return authorization to return to

Kaz USA, Inc. for examination and/or repair.

19. Do not run fan cord under carpeting. Do not

cover cord with throw rugs, runners, or similar

coverings. Do not route cord under furniture or

appliances. Arrange cord away from traffic areas

and where it will not be tripped over.

WARNING:

To Reduce The Risk

of Fire or Electric Shock, Do Not Use

This Fan With Any Solid State Speed

Control Device

®