Table of Contents
All manuals and user guides at all-guides.com
CLOCK
MINI HIFI SYSTEM
STANDBY
ON
POWER SAVE
IR SENSOR
CD 1•2•3
BAND
C1 • 2 • 3
CD
BAND
TUNER
SEARCH•TUNING
STOP•CLEAR
CLOCK/
PROG
DIM
TIMER
BASS
wOOx
PLUS
TECHNOLOGY
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about 7
seconds.
• Press CLOCK/TIMER briefly (or CLOCK
on the remote control) .
™ "PM 10:38 or 22:38" (the
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
™ "--: : : : : --" will be displayed if the
clock is not set.
Note:
– When the system goes into low power
standby mode, the clock setting will not
be displayed.
24
pg 01-29/C85-C83/22-Eng
24
5 Press CLOCK/TIMER again to store the
DOLBY B NR
NEWS/TA
• To exit without storing the setting, press
RDS
TAPE 1•2
CDR/DVD
CD TEXT
Notes:
TAPE
CDR
AUX
– During clock setting, if no button is
PRESET
PLAY PAUSE
PREV
SIDE
NEXT
DUB
A. REV
RECORD
(HSD)
– When a power interruption occurs, the
TREBLE
LEVEL
– To set the time with RDS clock, see
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "AM 12:00" or
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select clock
mode.
2 Press PROG (on the system only) to
select 12- and 24- hour mode.
™ If 12-hour mode is selected,
"AM 12:00" starts flashing.
™ If 24-hour mode is selected, "00:00"
starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
TIMER
Timer Setting
setting.
• The system can switch on to CD,
™ The clock starts.
TUNER, or TAPE 2 mode automatically
at a preset time. It can serve as an
Ç on the system.
alarm to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
pressed within 90 seconds, the system
once it is set.
will exit clock setting mode
• The volume of the timer will
automatically.
increase from the minimum level
until the volume level before the set
clock setting is erased.
is switched to standby mode.
"Receiving RDS Radio Station" under
1 Press and hold CLOCK/TIMER for more
TUNER section.
than 2 seconds to select timer mode.
™ "AM 12:00" or "00:00" or the
last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™ The
™ The selected source is lit while other
available sources are flashing.
2 Press CD, TUNER or TAPE to select the
desired source.
• Before selecting CD or TAPE, make sure
a CD or tape is loaded in the CD tray or
tape deck 2.
3 Press à or á on the system to set
the hour for the timer to start.
4 Press í or ë on the system to set
the minute for the timer to start.
3/6/00, 1:01 PM
starts flashing.
TIMER
3139 116 19611
Table of Contents
