Sealey HPT750 Instructions Manual

Sealey HPT750 Instructions Manual

Hydraulic platform truck

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: pLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OpERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE pRODUCT CORRECTLY AND WITH CARE FOR THE pURpOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE OR pERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. pLEASE KEEp INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
 WARNING! Ensure all Health and Safety, local authority, and general workshop practice regulations and recommendations are
strictly adhered to when lifting or moving heavy loads. The lifting or movement of heavy loads may be dangerous if not undertaken
correctly.
 Familiarise yourself with the application and limitations, as well as the specific potential hazards peculiar to the truck.
 Maintain the truck in good condition (use an authorised service agent).
 Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
 Use a qualified person to lubricate and maintain the truck. DO NOT use brake fluid to top up hydraulic unit. Use Sealey hydraulic oil
only.
 Keep the truck clean for best and safest performance. DO NOT use on Tarmacadam when fully laden as the wheels may sink in.
 Locate truck in an adequate working area for its function, keep area clean and tidy and free from unrelated materials.
 WARNING! Use truck on flat, level, solid ground, preferably concrete. Ensure the floor over which the truck will be transported is
swept clean and that there are no obstacles in the way.
 Keep the work area clean, uncluttered and ensure there is adequate lighting.
 Keep children and non essential persons away from the loading/unloading and transporting area.
 Keep hands and body clear of the edge and underside of the platform when operating the truck.
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
 WARNING! Ensure load is placed level and centrally on truck platform and if necessary strap load in place before attempting to lift,
lower, or transport. When raised, check that the platform/load will not foul on the handle and/or your hand when lowering the load.
 WARNING! Use the truck with diligence. DO NOT allow truck to knock into anything. Even when unladen, the truck is heavy and if
misused could cause serious damage and/or personal injury. Continually monitor transportation, lifting and lowering operations.
 Take care to ensure you can view the way ahead when moving the truck. Take special care when approaching blind corners.
 Before lifting check that there are no overhead obstructions.
 Engage the wheel locks before attempting to raise or lower the platform.
 DANGER! If a heavy load tips or leans STOP whAT yOuR ARE DOING. MOVE QuICKLy TO A SAFE DISTANCE. DO NOT
TRy TO hOLD OR STEADy a heavy load. Failure to follow this instruction may cause serious personal injury.
 Ensure the truck is fully lowered before attempting to transport a load.
 Before lowering the platform, ensure there are no obstructions underneath the platform and that all persons are standing clear of
the truck.
 The lowering speed is a fixed rate regardless of the load weight. Stop lowering by releasing the valve control lever on the handle.
 WARNING! DO NOT exceed the rated capacity of the truck.
 DO NOT use the truck if a part is missing or damaged.
 DO NOT load the truck so that it is top heavy. Ensure loads are evenly placed on the truck platform.
 DO NOT ride on the truck or allow any person to be transported on the truck.
 DO NOT use the truck for any purpose other than lifting, lowering and transporting loads.
 DO NOT allow truck to free wheel in transit. Always propel and control the truck by using the handle.
 DO NOT use the truck on sloping surfaces.
 DO NOT operate the truck when you are tired or under the influence of alcohol, drugs or intoxicating medication.
 DO NOT allow children to operate the truck.
 DO NOT adjust or tamper with the hydraulic safety valve.
 DO NOT place any part of your body within or under the truck platform when raised.
 When not in use, fully lower the platform and store in a safe, dry, childproof area.
2.
INTRODUCTION
Heavy-duty construction featuring two fixed wheels and two guarded, braked castors. One-piece hydraulic unit controlled by large,
rear mounted, foot pedal. Safety release mechanism positioned on handlebar for smooth, controlled descent. Suitable for numerous
garage, industrial and warehouse handling applications.
3.
SpECIFICATION
Model . . . . . . . . . . . . . . . . . . . . . . HpT1000 . . . . . . . . . . . HpT750
Capacity (kg) . . . . . . . . . . . . . . . . . . . 1000kg . . . . . . . . . . . . 750kg
Min platform height (mm) . . . . . . . . . 430mm . . . . . . . . . . . . 420mm
Max platform height (mm) . . . . . . . . 1020mm
Platform length . . . . . . . . . . . . . . . 1015mm . . . . . . . . . . 1000mm
Wheel diameter . . . . . . . . . . . . . . . . 150mm . . . . . . . . . . . . 147mm
INSTRUCTIONS FOR:
hydraulic platform truck
MODELS:
. . . . . . . . . . 900mm
HpT1000 & HpT750
HPT1000 & HPT750 - 2 - 310108
loading

Summary of Contents for Sealey HPT750

  • Page 1 SpECIFICATION Model ..... . HpT1000 ... HpT750 Capacity (kg) ....1000kg ... . 750kg Min platform height (mm) .
  • Page 2 Note: With or without a load, always transport the truck with platform in its lowest position. When not in use, store the truck with the platform in the lowest position. HPT1000 & HPT750 - 2 - 310108...
  • Page 3: Maintenance

    The oil cylinder is a sealed unit and must not be accessed. For service contact your authorised dealer. WARNING! Only a good quality hydraulic oil, such as SEALEY HYDRAULIC JACK OIL must be used, DO NOT use brake fluid. ...
  • Page 4 It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Sole UK Distributor 01284 757500 www.sealey.co.uk Sealey Group, 01284 703534 [email protected] Bury St. Edmunds, Suffolk.
  • Page 5 It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Sole UK Distributor 01284 757500 www.sealey.co.uk Sealey Group, 01284 703534 [email protected] Bury St. Edmunds, Suffolk.
  • Page 6 Issue No:..1 Issue Date: . . . 110506 PAGE 1 OF 2 Item Model Description Item Model Description Item Model Description 101 HPT750.101M HANDLE GRIP 123 HPT750.123 BRAKE 145 HPT750.145 CONNECTING ROD 102 HPT750.102 HANDLE 124 HPT750.124 WASHER 146 HPT750.146...
  • Page 7 245 HPT750.245B WASHER 205 HPT750.205 PUMP PISTON 227 HPT750.227 PLUG 246 HPT750.246B O-RING 206 HPT750.206 SPRING 228 HPT750.228 O-RING 247 HPT750.247B CUP PACKING 207 HPT750.207 SPRING CAP 229 HPT750.229 ADJUSTING BOLT 248 HPT750.248B PISTON 208 HPT750.208 RETAINING RING 230 HPT750.230 SPRING 249 HPT750.249B O-RING...

This manual is also suitable for:

Hpt1000