Table of Contents
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Basic settings
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dispensing
Intensive drying
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Press
.
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows Hxx.
a The display shows
Press
3.
the display shows the required set-
ting.
Display text
Selection
1
H04
H00 - H07
1
r05
r00 - r06
1
d00
d00 - d01
rE
YES
.
repeatedly until
Description
Set the water softening system to
your water hardness.
→ "Setting the water softening sys-
tem", Page 23
Level H00 switches the water soften-
ing system off.
Set the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid",
Page 25
Switch the rinse aid system off with
level r00.
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note: Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Press
repeatedly until the dis-
4.
play shows the right value.
You can change several settings.
To save the settings, press
5.
for 3 seconds.
Basic settings en
33
Table of Contents
