Table of Contents
Quick Links
Table of Contents
Related Manuals for Hitachi HILF65101
Summary of Contents for Hitachi HILF65101
- Page 1 Installation Manual 65˝ (64.56˝) Model: HILF65101 65” Interactive LED/LCD...
-
Page 2: Precautions And Safety Instructions
QUICK SETUP GUIDE For further information, see the user manual. Please contact directly if you have questions on the use of the touch monitor after reading the Installation Manual and User Manual. Important: Please read the precautions, safety instructions and this installation manual carefully before installing the touch monitor. -
Page 3: Moving And Carrying Notice
Moving and Carrying Notice Moving Notice: Moving the monitor requires at least four people. If not, it may drop and a serious injury may result. Carrying Notice: This monitor is heavy; please follow the instructions below when you are ready to carry the monitor. Failure to do, it may cause injury. - Page 4 Only install the unit on vertical, stable and level surfaces. Don‘t place objects on the touch monitor. • If the touch monitor is covered or the vents are blocked, the monitor could overheat and cause a fire. • If metal or liquid gets into the monitor, it may cause an electric shock. •...
-
Page 5: Package Contents
2. Package contents Packing list Item Q’ty 1. Interactive monitor 2. Carton 3. Bottom cushion 4. Top cushion 5. Packing bag 6. Accessories box Unpacking 1. Set the LCD Monitor box in front and upright position. 2. Cut the banding and take off 10 clips 3. -
Page 6: Audio Line Out
3. Description ② ③ ② ② ① ④ ② ① ⓐ ⓑ ⓒ ⓓ ⓔ ⓕ ⓖ ⓗ ⓘ ⓙ ⓚ ⓐ USB for Touch(Option) ⓑ USB for Touch ⓒ RS232C ⓓ HDMI 1 Input ⓔ HDMI 2 Input ⓕ DISPLAY PORT Input ⓖ... - Page 7 ② When you need to install OPS PC. There is a slot on ② for OPS PC. When you need to install OPS, remove screws and existing cover first and screw up again after mounting OPS PC in the slot. ③...
-
Page 8: Power On/Off
4. Remote Controller(RCU) Instructions Key Name Description Power ON/OFF. SOURCE Activates OSD menu of input source selecting. Navigates input source. ▲ Navigates upper menu in main OSD menu. Navigates input source. ▼ Navigates down menu in main OSD menu. Navigates input source ▶... -
Page 9: Touch Operation
Display Mode Turning the monitor on 1. Correctly insert the power cord into the monitor and into the power socket. 2. Press the power button on the bottom of monitor or front control panel. Turning the monitor off With the power on, press the power button on the remote or control keypad to place the monitor backside in a standby mode. -
Page 10: Wall Mounting
6. Repeat action 4 until you get to the last calibration point in the lower right-hand corner. 7. When you complete the nine-point calibration, a conformation window appears. Click done to accept the calibration; click Cancel or do nothing (in which case the calibration window automatically disappears after five seconds) to cancel the calibration. -
Page 11: Troubleshooting
7. Trouble Shooting Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Perform the adjustments according to the instructions on the “Operating the monitor page”. If the problem you have experienced isn’t described below or you can’t correct the problem, stop using the monitor and call service personnel or your dealer. - Page 12 Rev 001...