Touchpad - HP Pavilion 17-AR050WM Maintenance And Service Manual

NOTE:

The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad

bracket is available using spare part number 933471-001. The TouchPad cable is available using spare part

number 933467-001.

Description

TouchPad (does not include TouchPad bracket or TouchPad cable)

Before removing the TouchPad, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

4.

Remove the optical drive (see

5.

Remove the bottom cover (see

6.

Remove the battery (see

Remove the TouchPad:

1.

Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect

the TouchPad cable from the system board.

2.

Detach the TouchPad cable (2) from the keyboard/top cover. (The TouchPad cable is attached to

the keyboard/top cover with double-sided adhesive.)

3.

Remove the three Phillips PM2.0×4.2 screws (3) that secure the TouchPad and the TouchPad bracket to

the keyboard/top cover.

4.

Remove the three Phillips PM2.0×2.3 broad head screws (4) that secure the TouchPad to the keyboard/

top cover.

5.

Remove the TouchPad bracket (5).

34

Chapter 5 Removal and replacement procedures

Optical drive on page

Bottom cover on page

Battery on page

27).

24).

25).

Spare part number

926853-001