Table of Contents
Quick Links
Table of Contents
Summary of Contents for CReTE Systems DK886EX
- Page 1 TABLET COMPUTER DK886EX USER’S GUIDE...
- Page 2 Copyright © 2008 CReTE Systems Inc. All rights reserved. No part of this publication may be processed; such as reproduced, transmitted, transcribed, stored in a retrieval system, translated into any computer language in any form, or by any means of electronic, mechanical, magnetic, optical, chemical, or others without the prior written permission of the manufacturer.
- Page 3 EMC and Safety Notice Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 4 Important Note FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operated with any other antenna or transmitter. Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
- Page 5 Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards. EN 300 328 V.1.4.1 (2003-04) EN 301 489-1 V.1.4.1 (2002-04)/EN 301 489-17 V.1.2.1 (2002-04) EN 50371:2002 EN 60950:2000 UL, TÜV AC Adapter (TÜV includes EN60950 LVD) Power Conservation This computer consumes much less power than conventional computers.
- Page 6 For more information on collection, reuse and recycling, please consult local or regional waste administration. You can also contact the dealer for more information on the environmental details of the equipment.
-
Page 7: Table Of Contents
CONTENTS GETTING STARTED .................... 1 ..........................1 NPACKING ..........................2 UICK HECK ......................3 ONTROLS AND NDICATORS COMPONENTS AND OPERATIONS ..............7 ............................. 7 OCATION ..........................7 UGGEDNESS ........................7 PERATING YSTEMS AC A ..........................8 DAPTER ............................8 ATTERY POST........................ - Page 8 ........................20 RIVE ........................... 20 OUCH CREEN I/O P ........................... 21 ORTS )................21 IMENSIONS AND EIGHT WITH UMPER AC A ..........................21 DAPTER ............................ 21 ATTERY ........................22 EYPAD EYBOARD ) ....................22 EHICLE DAPTER OPTIONAL DL-8I/DL-8M ( ) ..................22 OCKLIGHT OPTIONAL ) ......................
-
Page 9: Getting Started
Getting Started GETTING STARTED Unpacking The following components come with your computer. If anything is missing or damaged, please notify the dealer immediately. Computer unit AC Adapter AC Power Cord Utility CD User's Guide Carrying Bag... -
Page 10: Quick Check
Getting Started Quick Check Insert the battery into compartment; fix the screw till battery is in position. Attach the AC adapter and charge battery for at least 10 minutes. Turn ON the computer by pressing the power button momentarily. Notice: When ambient temperature is under 0℃, the system may not boot up immediately. -
Page 11: Controls And Indicators
Getting Started Controls and Indicators Note: Some of the functions are optional. Front RF device indicator Battery charge/heater activity indicator Charging OFF: Battery full (when no battery installed it’s off, too) Flash: Heater active (heater is an optional device) HDD (Hard Disk Drive) activity indicator Power indicator F1~F6: Function keys, blue font are alternative functions enabled by pressing... - Page 12 Getting Started Power button (refer “Timeout/Standby/Wake up”) To enable alternative function keys Sleep button (refer “Timeout/Standby/Wake up”) Display brightness decrease Display brightness increase Function backlight Track point Left button of mouse Rear Secondary battery connector...
- Page 13 1. Primary battery 2. LAN 3. USB (Universal Serial Bus) 4. USB (Universal Serial Bus) 5. PCMCIA slots or Express Card Right 1. DC jack (2 pin for DK886EX-I, 3 pin for DK886EX-M) 2. Serial port (COM1) 3. RF Device Switch (optional)
- Page 14 Getting Started 1. ANT Cover 2. Stylus holder 3. ANT Cover Bottom 1. Docking connector 2. External antenna jack (optional)
-
Page 15: Components And Operations
Components and Operations COMPONENTS AND OPERATIONS Location A clean and moisture-free environment is preferred. Make room for air circulation. Avoid areas with: Sudden or extreme changes in temperature. Extreme heat. Strong electromagnetic fields (near television set, motor rotation area, etc.). Dust or high humidity. -
Page 16: Ac Adapter
Components and Operations AC Adapter The AC adapter performs two functions: It powers the computer from an external AC source. It charges the computer battery. The adapter automatically detects the AC line voltage (110V or 220V) and adjusts accordingly. The following are recommended when using the AC adapter: Use a properly grounded AC outlet. - Page 17 Components and Operations Shut down the computer when it will not be in use for long time. Battery Low When the battery is nearly exhausted, the computer gives the following “Battery Low” warnings: Windows battery low warning. The power LED flashes. Once the “Battery Low”...
-
Page 18: Boot Up And Post
Components and Operations Charging the Battery Plug in the AC adapter or vehicle adapter to start the battery charging. If the battery is already full, the sense circuitry will stop high current charge within several minutes. The LED Indicator turns ON when the battery is charging and turns OFF when the battery charge is completed. -
Page 19: Shutdown
Components and Operations Shutdown The following procedure is recommended in shutting down the computer: 1. Save any work you want to keep. 2. Make sure none of the disk drives are active (HDD and CD-ROM drive). 3. Remove any diskettes, CD-ROMs, or other media. 4. -
Page 20: Replacing Modules
Components and Operations Replacing Modules Caution! Turn OFF the power before replacing any module. To remove the modules: 1. Turn OFF the computer. (“Hibernate” or “suspend to disk” are not recommended as the parameters may change when modules are changed.) 2. -
Page 21: Touch Screen
Components and Operations HDD is user removable. This provides convenience and security. It can ONLY be removed while power is OFF. Note: NEVER drops your HDD module or exposes it to high temperature, high humidity, or any hazardous environment. NEVER try to disassemble the module. -
Page 22: External Backlight Keyboard (Optional)
Components and Operations External Backlight Keyboard (optional) The external backlight keyboard is equivalent to a full size desktop keyboard plus extra functions. The interface is via USB port. Track point The track point is functionally equivalent to a mouse. Pushing the track point may move the cursor on the screen. - Page 23 Components and Operations Mount Docklight 1. Open the rubber cap on the docking connector. 2. Align the docking connector. 3. Attach Docklight. 4. Fix the screws. Docklight ports Top: 1. Docking connector Bottom and Left: 1. Audio jacks (Microphone/Speaker) 2. RGB port 3.
-
Page 24: Stand Unit (Optional)
Components and Operations 7. USB port 3, 4 (proprietary sealed type) 8. Serial port (COM2) 9. DC jack Stand Unit (optional) Stand unit can hold the system unit and Docklight with adjustable view angle. It can be used in office or in vehicle. There are 2 configuration options: - Stand unit only to accept system unit. - Page 25 Components and Operations Please refer the illustration as below:...
-
Page 26: Optional Devices
Optional Devices OPTIONAL DEVICES Memory Card The memory card will expand main memory to facilitate better system performance. The cards are available as following: 512MB, 1GB, 2GB Battery A Lithium Ion rechargeable 2 battery may mount on the rear. The computer’s internal charger can detect 2 battery and perform charging accordingly. -
Page 27: Stand Unit
Optional Devices Stand Unit This acts as computer holder for office or vehicle operation and can work with or without Docklight. RF Device The RF device are available as following: - GPS - Bluetooth - HSDPA - Wi-Fi... -
Page 28: Specifications
Specifications SPECIFICATIONS Intel Core2 Duo (Merom) CPU runs at multiple speeds dependent on CPU type and operating system: The CPU speed switches automatically by detecting AC adapter/battery operation and busy state. Memory System memory Standard: 1GB Expandable 2GB Cache memory Internal level-II 2MB Video memory 224MB (shared RAM) -
Page 29: I/O Ports
Specifications I/O Ports Serial port (DB9) LAN jack 1 type-II PCMCIA slots + 1 Express slot or 2 type II PCMCIA slots Docking port USB port DC jack Dimensions and Weight (with Bumper) Width: 310 mm (12.20”) Depth: 255 mm (10.04”) Height: 54 mm (2.13”) Weight:... -
Page 30: Keypad/Keyboard
Specifications Dimension: 150 mm (W) x 90 mm (D) x 20 mm (H) Weight: 500 g (1.1 1b.) Keypad/Keyboard Embedded Keypad: Function keys: F1~F6 Optional External USB Keyboard: Number of keys: Key travel: 1.5 mm Function: Emulates standard 101/102-key keyboard Trackpoint: Equivalent to PS/2 mouse Vehicle Adapter (optional) -
Page 31: Materials And Recycling
Specifications Materials and Recycling Materials of the computer are as follows: Cabinet: Magnesium alloy AZ91D UL grade PC+ABS GE C2800 or TN-3813BW Bracket: Aluminum 5052 Steel with Nickel plating Stainless Steel S304 PCB: FR-4, UL 94V0 Battery: Rechargeable Lithium Ion cells Packing: Carton: Unbleached paper Cushion: Recyclable PE... -
Page 32: Bios Setup
BIOS Setup BIOS SETUP Press [F2] at boot up to enter BIOS setup. Use arrow keys to select options and [+/-] to modify them. When finished, move to” Exit” and press [Enter] then confirm save by pressing [Y]. Main Menu Phoenix TrustedCore (tm) Setup Utility Main Advanced... -
Page 33: Ide Channel 0 Master Sub-Menu
BIOS Setup IDE Channel 0 Master Sub-Menu Phoenix TrustedCore (tm) Setup Utility Main IDE Channel 0 Master [None] Item Specific Help Type: [Auto] User = you enter parameters of hard-disk drive installed Multi-Sector Transfers: [Disabled] at this connection. LBA Mode Control: [Disabled] Auto = autotypes hard-disk 32 Bit I/O:... -
Page 34: Ide Channel 0 Slave Sub-Menu
BIOS Setup IDE Channel 0 Slave Sub-Menu Phoenix TrustedCore (tm) Setup Utility Main IDE Channel 0 Slave [None] Item Specific Help User = you enter parameters Type: [Auto] of hard-disk drive installed Multi-Sector Transfers: [Disabled] at this connection. LBA Mode Control: [Disabled] Auto = autotypes hard-disk drive installed here. -
Page 35: Ide Channel 1 Master Sub-Menu
BIOS Setup IDE Channel 1 Master Sub-Menu Phoenix TrustedCore (tm) Setup Utility Main IDE Channel 1 Master [None] Item Specific Help Type: [Auto] User = you enter parameters of hard-disk drive installed Multi-Sector Transfers: [Disabled] at this connection. Auto = autotypes hard-disk LBA Mode Control: [Disabled] drive installed here. -
Page 36: Ide Channel 1 Slave Sub-Menu
BIOS Setup IDE Channel 1 Slave Sub-Menu Phoenix TrustedCore (tm) Setup Utility Main IDE Channel 1 Slave [None] Item Specific Help Type: [Auto] User = you enter parameters of hard-disk drive installed Multi-Sector Transfers: [Disabled] at this connection. Auto = autotypes hard-disk LBA Mode Control: [Disabled] drive installed here. -
Page 37
BIOS Setup General Help Window Pressing
or on any menu brings up the General Help window that describes in detail the keys and functions for setup. The scroll bar on the right of any window indicates that there is more than one page of information in the window. -
Page 38: Advanced Menu
BIOS Setup Advanced Menu Phoenix TrustedCore (tm) Setup Utility Main Advanced Security TPM State Boot Exit Item Specific Help Legacy USB Support: [Enabled] Summary screen: [Disabled] Enable support for Legacy Boot-time Diagnostic Screen: [Enabled] Universal Serial Bus QuickBoot Mode: [Enabled] Extended Memory Testing [None] IGD - Boot Type:... - Page 39 BIOS Setup Feature Options Description activated during POST CRT+LFP LFP-SDVO TV-SDVO CRT+LFP-SDVO CRT+EFP PS/2 Mouse Disabled ’Disabled’ prevents any installed PS/2 mouse from functioning, but frees up IRQ Enable Auto Detect ’Enabled’ forces the PS/2 mouse port to be enabled regardless if a mouse is present. ’Auto Detect’...
-
Page 40: Sio Smc227 Configuration Sub-Menu
BIOS Setup For most frequently altered setup “SIO SMC227 CONFIDURATION” please refers following: Warning: Incorrect settings in RS485/RS422 of COMx mode may cause SIO component Damage. Must be cautious before Setup. SIO SMC227 Configuration Sub-Menu Phoenix TrustedCore (tm) Setup Utility Advanced SIO SMC227 CONFIGURATION Item Specific Help... - Page 41 BIOS Setup Feature Options Description [Disabled] No configuration [2F8-IRQ 3] Set the base I/O address for COM2 COM2 mode RS232 Configure UART mode options: TTL2 [RS232]：External Device [TTL2]：Internal Device COM3 port Disabled Configure COM3 using device options: 3E8-IRQ 10 [Disabled] No configuration [3E8-IRQ 10] Set the base I/O address for COM3...
-
Page 42: Security Menu
BIOS Setup Security Menu Warning: If you forget user/supervisor password, the computer has to send back to manufacturer and replace EEPROM to make it work again. Phoenix TrustedCore (tm) Setup Utility Main Advanced Security TPM State Boot Exit Item Specific Help Processor Serial Number [Disabled] Set Supervisor Password... - Page 43 BIOS Setup Feature Options Description USB Interface Disabled Control the listed USB Functions by setting the item to the desired value. Enabled AC97 Audio Disabled Control Detection of the AC97 Audio Interface Device. Auto Auto = AC97 Audio will be enabled if present, disabled otherwise.
-
Page 44: Rf Security Control Sub-Menu
BIOS Setup For most frequently altered setup “RF Security Control” please refers following: RF Security Control Sub-Menu Phoenix TrustedCore (tm) Setup Utility Security RF Security Control: Item Specific Help Wireless Lan: [Disabled] Wireless Lan Control GPRS: [Disabled] GPS: [Disabled] Blue Tooth: [Disabled] Help Select Item... -
Page 45: Tpm State Menu
BIOS Setup TPM State Menu Phoenix TrustedCore (tm) Setup Utility Main Advanced Security TPM State Boot Exit Item Specific Help Current TPM State: Enabled and Deactivated Change TPM State: [No Change] Change TPM State Help Select Item –/+ Change Values Setup Defaults ↑↓... -
Page 46: Boot Menu
BIOS Setup Boot Menu Phoenix TrustedCore (tm) Setup Utility Main Advanced Security TPM State Boot Exit Item Specific Help Boot priority order: 1: USB KEY: 2: USB FDC: Keys used to view or 3: USB HDD: configure devices: 4: IDE CD: Up and Down arrows select 5: IDE HDD: a device. -
Page 47: Exit Menu
BIOS Setup Exit Menu Phoenix TrustedCore (tm) Setup Utility Main Advance Security TPM State Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Exit System Setup and save Discard Changes your changes to CMOS. Save Changes Help Select Item –/+... -
Page 48: Utilities And Drivers
Utilities and Drivers UTILITIES AND DRIVERS Note: Most device drivers are available in Windows. Only when the default driver does not work properly you need to install the factory bundled drivers. The utility CD includes most drivers of the computer’s installed devices. -
Page 49: Audio Driver
Utilities and Drivers Resolution & Color LCD + RGB 1600x 1200x 16-bit color 1600x 1200x 24-bit color 1600x 1200x 32-bit color 2048x 1536x 16-bit color 2048x 1536x 24-bit color 2048x 1536x 32-bit color The table lists typical display modes only. The system also supports standard video modes with lower resolution and color. -
Page 50: Pcmcia Driver
Utilities and Drivers (\DK8EX\Driver\Touchscreen\DP9000\2kxpVista3264\PM...Universal…v1.0.0. 8), and follow the prompt to complete installation and then restart. PCMCIA Driver Windows The driver is automatically installed under Windows. Mini PCI 1G AX92200 LAN Insert the Driver CD into the CD-ROM. Click Setup.exe in the directory of E:\AX92200\DRIVER\RTL8110S\windows (612) then follow the prompt to complete installation. -
Page 51: Wireless Manager
Utilities and Drivers Wireless Manager For flight safety and power saving reason, there is a utility provided easily to enable/disable RF devices of Wireless LAN/GPRS/GPS/Bluetooth in the run time Insert the Driver CD into the CD-ROM. Click setup.exe in the directory of Utilities\Wireless Manager then follow the prompt to complete installation. - Page 52 Utilities and Drivers In addition, if you activate “Launch Function key manager at startup”, will be on the task menu automatically after the system is launched. If you activate “Launch On-Screen keyboard at logon” and the log on password is set; On- Screen keyboard will pop-up automatically when system get into/recover from following modes, “Logon/Logoff”, “Standby/Resume”, “Boot/Reboot”, and “Hibernate/Resume”.
- Page 53 Utilities and Drivers Change display output Rotate screen Change desktop background color 10. Chang desktop wallpaper 11. Launch On-Screen keyboard 12. Toggle function 2 Some functions need to assign additional parameters to work properly. Assign parameter for a function, click the mouse left button on the same row parameter field to enter the parameter or assign option in the pop-up dialog.
- Page 54 Utilities and Drivers Simulate mouse button click Used to define two button clicks of the mouse. “Left button click” and “Right button click” are alternatives. 6. Change display output Switch display output among LCD, CRT and DVI. Just only one single mode can exist.
- Page 55 Utilities and Drivers Please make sure Intel Extreme Graphics 2 driver/Control Panel application is installed and this icon will be on the task menu. Activate the “Graphics Properties …” from “Graphics Options”. In the “Hot Keys”, activate “Enable Hot Keys”.
- Page 56 Utilities and Drivers In the “Rotation”, activate “Enable Rotation” and set the “Rotation Views” to “Normal”. It is recommended that to set a Function Key to work as “Rotate Screen” with parameter of “Normal” when you have set other keys to act as “Rotate Screen”...
- Page 57 Utilities and Drivers It results from “Hide modes that monitor cannot display” is enabled. So in such a situation, uncheck this box to enable all rotation views under Control Panel/Display/Display Properties/Setting/Advanced/Monitor.
- Page 58 Utilities and Drivers If you rotate screen to “Normal”, the “System Properties” windows will pop- 8. Change desktop background color Used to change background color to make display more readable in the day or night. Select a color from the pop-up color palette. 9.
-
Page 59: Maintenance/Service
Maintenance/Service MAINTENANCE/SERVICE Cleaning ALWAYS turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lint- free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the cloth and wipe. - Page 60 Maintenance/Service - Address - Unit serial number - Place and date of purchase or the original invoice number - Date of failure - A DETAILED description of the problems you have encountered including: The operating system, the add-on device installed (if any), the application software, the failure phenomenon, etc.
- Page 61 Recycled/Recycleable Printed in Taiwan P/N: G630804000A...