Frigidaire FGB24S5DCC Service Data Sheet

SERVICE DATA SHEET

Gas & Electric Wall Ovens with Electronic Oven Control (ES 300)

NOTICE

This service data sheet is intended for use by persons having electrical and mechanical training and a level of

knowledge of these subjects generally considered acceptable in the appliance repair trade. The manufacturer

cannot be responsible, nor assume any liability, for injury or damage of any kind arising from the use of

this data sheet.

SAFE SERVICING PRACTICES

To avoid the possibility of personal injury and/or property damage, it is important that safe servicing practices be

observed. The following are some limited examples of safe practices.

1. Do not attempt a product repair if you have any doubts as to your ability to complete it in a safe and satisfactory

manner.

2. Before servicing or moving an appliance, remove power cord from electric outlet, trip circuit

breaker to Off, or remove fuse.

3. Never interfere with the proper installation of any safety device.

4. USE ONLY REPLACEMENT PARTS CATALOGED FOR THIS APPLIANCE. SUBSTITUTIONS MAY DEFEAT COMPLIANCE

WITH SAFETY STANDARDS SET FOR HOME APPLIANCES.

5. GROUNDING: The standard color coding for safety ground wires is GREEN OR GREEN WITH YELLOW STRIPES.

Ground leads are not to be used as current carrying conductors. IT IS EXTREMELY IMPORTANT THAT THE SERVICE

TECHNICIAN REESTABLISH ALL SAFETY GROUNDS PRIOR TO COMPLETION OF SERVICE. FAILURE TO DO SO

WILL CREATE A POTENTIAL HAZARD.

6. Prior to returning the product to service, ensure that:

•

All electric and gas connections are correct and secure.

•

All gas connections are tested for leaks. DO NOT TEST FOR GAS LEAKS WITH A FLAME.

•

All electrical leads are properly dressed and secured away from sharp edges, high-temperature components,

and moving parts.

•

All uninsulated electrical terminals, connectors, heaters, etc. are adequately spaced away from all metal

parts and panels.

•

All safety grounds (both internal and external) are correctly and securely reassembled.

•

All panels are properly and securely reassembled.

ES300 ELECTRONIC OVEN CONTROL

The ES300 electronic oven control is almost identical to the current control with a few exceptions.

Clear

Bake

Off

Oven

Preheat

Broil

Clean

Door Locked

Self-Cleaning Oven

Note:

The ES300's are not field repairable. Only temperature settings can be changed. See Electronic Oven Control

Guide (section recalibrating your oven temperature)

Note:

Depending on model, the size and shape of touch pads may vary (for example elliptical instead of round).

During a normal bake mode, the control preheats the oven with the bake element. When the desired temperature

is reached, the control adds top heat by cycling the broil element on for 6 to 9 seconds per minute . The bake element

is on for the remaining time of the minute. Both elements use full power when they are on but they are never on at

the same time.

Bake

Clock

Time

Timer

Stop

On/Off

Time

1

318047410 (0205) Rev. C

15

Bake

K4

P2

Bake Relay

K2

K5

Broil

Broil Relay

K1

P3

L1

P1

P5

1