Table of Contents
6 Change settings
This section helps you change the settings of
the projector.
1
When the projector is turned on, press
or
on the remote control (or
projector) to access the settings menu.
2
Use the Navigation buttons and OK to
select and change settings.
Language settings
Select your desired language for on-screen
menu.
•
Navigate to Language, and press OK, then
press
/
to select a language.
Input source selection
Navigate to Input Source to access the
following settings.
•
Auto: Automatically switch to the correct
input source when an HDMI or USB-C
device is connected.
•
HDMI: Select it when an HDMI device is
connected.
Change settings
•
USB-C: Select it when a USB-C device is
connected.
You need to select a correct input source,
so that the projection screen can show
images.
on the
Picture settings
You can access the following picture settings.
•
Keystone Correction: Select an option to
correct keystone or distorted images to be
rectangular or square.
•
•
•
•
•
Proj. Direc.: Adjust the projection to
the correct position based on different
installation of the projector.
•
Digital Zoom: Scale the projection image
within the range from 50% to 100%.
•
Picture Preset: Select a predefined color
brightness setting for picture and video
display.
•
Picture Adj.: Adjust Brightness/Contrast/
Saturation/Toneburst/Sharpness with the
values from 0 to 100.
Auto Keystone: Enable or disable
auto correction of the image shape
when tilting the projector upwards or
downwards. When Auto Keystone is
activated, all the other image correction
options will be deactivated.
Manual Keystone: Manually adjust four
corners of the image.
Manual Horiz. Keyst.: Manually correct
keystone or distorted images in the
horizontal orientation.
Keystone Calibration: Perform this
function if the auto keystone correction
does not correct the image shape
ideally.
13
Hide quick links:
Table of Contents
