Table of Contents
NOTE
• Disassembling/Assembling the water lines.
a Collet b Water supply line c Insert line d Clip
• Gently insert the water supply line until only
one of the line's insert lines is visible. Pull on
the line to make sure that it is tightly
fastened.
Correct
Incorrect
• If the end of the water supply line is
damaged, it should be trimmed to ensure it
does not leak when refitted.
• e Not straight f Damaged g Stretched
Adjusting the Height of the
Door
If the door of the appliance is not level, adjust
the difference in the height of appliance door
using the following method.
NOTE
• Because the hinge pin may fall out, do not
adjust the height of the appliance door more
than 5 mm.
*Reference
1
Turn the keeper nut clockwise using the
spanner.
To loosen the nut
2
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise
with an 8 mm spanner.
Down
Up
EN
Keeper nut
Adjustment hinge pin
15
- Quick Links:
- Troubleshooting
Hide quick links:
Table of Contents
