Touchpad; Removing The Touchpad - Dell Inspiron 7500 2n1 Black Service Manual

Steps

1. Place the power-adapter port, along with its cable, into the slot on the palm-rest and keyboard assembly.

2. Route the power-adapter port cable through the routing guide on the palm-rest and keyboard assembly.

3. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.

4. Connect the power-adapter port cable to the system board.

5. Close the right display hinge.

6. Replace the two screws (M2x3.5) that secure the right display-hinge to the system board and palm-rest and keyboard assembly.

7. Replace the screw (M2.5x5) that secures the right display-hinge to the system board and palm-rest and keyboard assembly.

Next steps

1. Install the

base

cover.

2. Follow the procedure in

Prerequisites

1. Follow the procedure in

2. Remove the

base

cover.

3. Remove the battery.

About this task

The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.

After working inside your

computer.

Before working inside your

computer.

Removing and installing components

27