Quick Links
modEl No's
thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: plEaSE rEad thESE iNStructioNS carEfully. NotE thE SafE opEratioNal rEQuirEmENtS, WarNiNGS & cautioNS.
uSE thE product corrEctly aNd With carE for thE purpoSE for Which it iS iNtENdEd. failurE to do So may cauSE
damaGE or pErSoNal iNJury, aNd Will iNValidatE thE WarraNty. plEaSE kEEp iNStructioNS SafE for futurE uSE.
1. SafEty iNStructioNS
WarNiNG! Ensure all Health and safety, local authority, and general workshop practice regulations and recommendations are strictly
adhered to when lifting or moving heavy loads. the lifting or movement of heavy loads may be dangerous if not undertaken correctly.
familiarise yourself with the application and limitations, as well as the specific potential hazards peculiar to the truck.
Maintain the truck in good condition (use an authorised service agent).
replace or repair damaged parts. Use genuine parts only. Non authorised parts may be dangerous and will invalidate the warranty.
use a qualified person to lubricate and maintain the truck. Do not use brake fluid to top up hydraulic unit. use sealey hydraulic oil only.
Keep the truck clean for best and safest performance. Do not use on tarmacadam when fully laden as the wheels may sink in.
Locate truck in an adequate working area for its function, keep area clean and tidy and free from unrelated materials.
WarNiNG! use truck on flat, level, solid ground, preferably concrete. Ensure the floor over which the truck will be transported is swept
clean and that there are no obstacles in the way.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep children and non essential persons away from the loading/unloading and transporting area.
Keep hands and body clear of the edge and underside of the platform when operating the truck.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
WarNiNG! Ensure load is placed level and centrally on truck platform and if necessary strap load in place before attempting to lift, lower,
or transport. When raised, check that the platform will not foul on the handle and/or your hand when lowering the load.
WarNiNG! use the truck with diligence. Do not allow truck to knock into anything. Even when unladen, the truck is heavy and if misused
could cause serious damage or personal injury. continually monitor transportation, lifting and lowering operation.
take care to ensure you can view the way ahead when moving the truck. take special care when approaching blind corners.
Before lifting check that there are no overhead obstructions.
Engage the wheel locks before attempting to raise or lower the platform.
DANGER! If a heavy load tips or leans STOP whAT yOuR ARE DOING. MOVE QuICKLy TO A SAFE DISTANCE. DO NOT TRy TO
hOLD OR STEADy a heavy load. Failure to follow this instruction may cause serious personal injury.
Ensure the truck is fully lowered before attempting to transport a load.
Before lowering the platform, ensure there are no obstructions underneath the platform and that all persons are standing clear of the truck.
the lowering speed is a fixed rate regardless of the load weight. stop lowering by releasing the valve control lever on the handle.
WarNiNG! Do not exceed the rated capacity of the truck.
Do not use the truck if a part is missing or damaged.
Do not load the truck so that it is top-heavy. Ensure loads are evenly placed on the truck platform.
Do not ride on the truck or allow any person to be transported on the truck.
Do not use the truck for any purpose other than lifting, lowering and transporting loads.
Do not allow truck to free wheel in transit. Always propel and control the truck by using the handle.
Do not use the truck on sloping surfaces.
Do not operate the truck when you are tired or under the influence of alcohol, drugs or intoxicating medication.
Do not allow children to operate the truck.
Do not adjust or tamper with the hydraulic safety valve.
Do not place any part of your body within or under the truck platform when raised.
When not in use, fully lower the platform and store in a safe, dry, childproof area.
2. iNtroductioN
Heavy-duty construction. All models fitted with two fixed and two swivel composite wheels for easy rolling over rough workshop and
warehouse floors. swivel wheels fitted with foot-operated brake. one-piece hydraulic unit controlled by large rear mounted foot pedal. safety
release mechanism positioned on handlebar for smooth controlled descent. suitable for numerous garage, industrial and warehouse handling
applications. supplied with non-slip platform cover for added load security. May also be used as a mobile service bench.
3. SpEcificatioNS
model . . . . . . . . . . . . . . . . . . . . . . . . . .hpt150 . . . . . . . . . . . . . . . hpt300.V2 . . . . . . . . . . . . . . . hpt400h . . . . . . . . . . . . . hpt500.V2
capacity (kg) . . . . . . . . . . . . . . . . . . . . . . 150kg . . . . . . . . . . . . . . . . . . . 300kg . . . . . . . . . . . . . . . . . . 400kg . . . . . . . . . . . . . . . . . . 500kg
Min platform height (mm) . . . . . . . . . . . 220mm . . . . . . . . . . . . . . . . . . 270mm . . . . . . . . . . . . . . . . . 360mm . . . . . . . . . . . . . . . . . 280mm
Max platform height (mm) . . . . . . . . . . . 715mm . . . . . . . . . . . . . . . . . . 760mm . . . . . . . . . . . . . . . . 1350mm . . . . . . . . . . . . . . . . . 860mm
Platform length . . . . . . . . . . . . . . . . . . . 700mm . . . . . . . . . . . . . . . . . . 810mm . . . . . . . . . . . . . . . . . 910mm . . . . . . . . . . . . . . . . . 815mm
Platform width (mm) . . . . . . . . . . . . . . . 450mm . . . . . . . . . . . . . . . . . . 500mm . . . . . . . . . . . . . . . . . 500mm . . . . . . . . . . . . . . . . . 500mm
Wheel diameter . . . . . . . . . . . . . . . . . . 100mm . . . . . . . . . . . . . . . . . . 125mm . . . . . . . . . . . . . . . . . 125mm . . . . . . . . . . . . . . . . . 125mm
hpt150
hpt300.V2
Original Language Version
InstructIons for:
hydraulic platform
truckS
hpt400h
HPt150, HPt300.V2, HPt400H, HPt500.V2
hpt500.V2
Issue: 3 - 20/10/09
Related Manuals for Sealey Power Products HPT150
Summary of Contents for Sealey Power Products HPT150
- Page 1 Use genuine parts only. Non authorised parts may be dangerous and will invalidate the warranty. use a qualified person to lubricate and maintain the truck. Do not use brake fluid to top up hydraulic unit. use sealey hydraulic oil only. ...
- Page 2 4. aSSEmBly A minimum of two people will be required to lift the truck out fig.1 of its packaging. Alternatively, cut and fold down flat one end of the box and wheel the truck out. fitting the handle. At the back of the truck there are two upstanding sockets to receive the bent loop handle (fig.1D).
- Page 3 WarNiNG! only a good quality hydraulic oil, such as SEalEy hydraulic Jack oil must be used, do Not use brake fluid. IMPORTANT: NO RESPONSIBILITy IS ACCEPTED FOR INCORRECT uSE OF ThE TRuCK.