Power Connector Cable - HP Pavilion 15 Maintenance And Service Manual

Description

Power connector cable

Before removing the power connector cable, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

4.

Remove the optical drive (see

a.

Bottom cover (see

b.

Battery (see

c.

Display assembly (see

Remove the power connector cable:

1.

Release the power connector cable from the retention clips (1) and routing channel built into the right

speaker and the keyboard/top cover (2).

2.

Remove the power connector cable (3).

Reverse this procedure to install the power connector cable.

68

Chapter 5 Removal and replacement procedures

Optical drive on page

Bottom cover on page

Battery on page

39)

Display assembly on page

36), and then remove the following components:

37)

59)

Spare part number

810327-006