Related Manuals for Salter BPA-9200
Summary of Contents for Salter BPA-9200
- Page 1 BLOOD PRESSURE MONITOR BLOOD PRESSURE MONITOR Instructions and Guarantee Instructions and Guarantee BPA-9200...
-
Page 2: Normal Blood Pressure Fluctuation
GUARANTEE Salter will repair or replace the product, or any part of this product, free of charge if within 2 years of the date of purchase, it can be shown to have failed through defective workmanship or materials. This guarantee covers working parts that affect the function of the blood pressure monitor. -
Page 3: Contents And Display Indicators
CONTENTS AND DISPLAY INDICATORS Low Battery Indicator Ready to inflate indicator Systolic Pressure Blood pressure level Classification Indicator Irregular heartbeat symbol Diastolic Pressure/ Memory Indicator Pulse Rate Display (Alternating) Date/Time Display (Alternating) MEM button START button Cuff LCD display INTENDED USE Fully Automatic Electronic Sphygmomanometer is for use by medical professionals or at home and is a non-invasive blood pressure measurement system intended to measure the diastolic and systolic blood pressures and pulse rate of an adult individual by using a non-invasive technique in which an inflatable cuff is wrapped around the upper arm. -
Page 4: Product Description
SPECIFICATIONS Product name: Blood Pressure Monitor Model BPA-9200-GB Internally powered, Type BF applied part, IPX0, No AP or APG, Classification Continuous operation Machine size Approx. 138mm × 98mm × 48mm (5 7/16”x 3 27/32”x 1 7/8”) 30cm-42cm (11 13/16”-16 17/32”), 22cm-30cm (8 21/32”-11... - Page 5 NOTICE 1. Read all of the information in the operation guide and any other literature in the box before operating the unit. 2. Stay still, calm and rest for 5 minutes before blood pressure measurement. 3. The cuff should be placed at the same level as your heart. 4.
-
Page 6: Setup And Operating Procedures
—Consult the dealer or an experienced radio/TV technician for help. 17. This blood pressure monitor is verified by auscultatory method. It is recommended that you check annex B of ANSI/AAMI SP-10:2002+A1:2003+A2:2006 for details of verification method if you need. SETUP AND OPERATING PROCEDURES 1. -
Page 7: Applying The Cuff
4. APPLYING THE CUFF a. Pulling the cuff end through the medal loop (the cuff is packaged like this already), turn it outward (away from your body) and tighten it and close the Velcro fastener. b. Place the cuff around a bare arm 1-2cm above the elbow joint. c. -
Page 8: Displaying Stored Results
d. The monitor inflates the cuff until sufficient pressure has built up for a measurement. Then the monitor slowly releases air from the cuff and carries out the measurement. Finally the blood pressure and pulse rate will be calculated and displayed on the LCD screen separately. -
Page 9: Deleting Measurements From The Memory
d. When the average is displayed, press the “MEM” button, the most recent result will be displayed. See picture 7-6. Followed by, the blood pressure and pulse rate will be shown separately. Irregular heartbeat symbol (if any) will blink. See picture 7-7&7-8. Press “MEM” button again to review the next result. See picture 7-9. In this way, repeatedly pressing the “MEM”... -
Page 10: Assessing High Blood Pressure For Adults
9. ASSESSING HIGH BLOOD PRESSURE FOR ADULTS The following guidelines for assessing high blood pressure (without regard to age or gender) have been established by the World Health Organization (WHO). Please note that other factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration. - Page 11 12. TROUBLESHOOTING (2) PROBLEM POSSIBLE CAUSE SOLUTION LCD shows low battery symbol Change the batteries LCD shows low battery symbol LCD shows “Er 0” Pressure system is unstable before measurement Don’t move and try again. LCD shows “Er 1” Fail to detect systolic pressure LCD shows “Er 2”...
-
Page 12: Explanation Of Symbols On Unit
EXPLANATION OF SYMBOLS ON UNIT Symbol for” THE OPERATION GUIDE MUST BE READ”(The sign background colour: blue.The sign graphical symbol: white) Symbol for “WARNING” Symbol for “TYPE BF APPLIED PARTS” (The cuff is type BF applied part) Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should not be disposed of with household waste. -
Page 13: Electromagnetic Compatibility Information
Guidance and manufacture’s declaration – electromagnetic emission The [BPA-9200] is intended for use in the electromagnetic environment specified below. The customer or the user of the [BPA-9200] should assure that it is used in such an environment. Emission test Compliance Electromagnetic environment - guidance The [BPA-9200] uses RF energy only for its internal function. - Page 14 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the [BPA-9200] is used exceeds the applicable RF compliance level above, the [BPA-9200] should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the [BPA-9200].
- Page 15 The [BPA-9200] is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the [BPA-9200] can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the [BPA-9200] as recommended below, according to the maximum output power of the communications equipment.
- Page 16 Register your product today at: www.homedicsgroup.com/register 0120 HoMedics Group Ltd HoMedics House, Somerhill Business Park, Five Oak Green Road, Tonbridge, Kent TN11 0GP, UK. www.salterhousewares.co.uk IB-BPA-9200-GB-0314-01...