Table of Contents
Quick Links
Table of Contents
Related Manuals for Epson B81302
Summary of Contents for Epson B81302
-
Page 1: Transparency Unit
Transparency Unit for use with EPSON Scanners B813021/B813022... -
Page 2: Unpacking The Unit
This transparency unit is a high-quality device developed to enable Epson Scanner owners to scan transparencies and slides. installing this unit on your Epson scanner, you can scan transparencies and slides beautifully, in full color. Also, it is not necessary to remove this unit if you wish to return to scanning normal reflective (paper) documents. -
Page 3: Removing The Shipping Screw
Removing the Shipping Screw To prevent damage during shipping a shipping screw the transparency unit. Make sure this screw to the following steps before you attempt 1. Turn the unit so the glass side faces up. 2. Remove the screw from the 3. - Page 4 Keep the shipping screw in a safe place; you will need it if Note: you should need to transport the scanner. When transporting the scanner, you should remove the transparency unit and reattach the shipping screw. If the unit’s lamp assembly is not in its initial position, you cannot attach the shipping screw.
- Page 5 4. Use a coin to tighten the two screws and secure the transparency unit. 5. Close the transparency unit. 6. Connect the transparency unit’s connector to the option connector on the scanner.
-
Page 6: Document Mat
Transparency Document Guide and Reflective Document Mat A transparency document guide and reflective document mat are included with this unit. Use as necessary. Positioning Transparencies You can scan the transparency types shown below: Document type Transparency documents (including slide film) in color or monochrome Scanning size Up to 5... - Page 7 Position transparency documents according to the steps below. 1. Open the transparency unit. 2. Place the transparency document guide on the scanner’s document table. 3. Using the transparency document guide, place the transparency document face down on the scanners glass document table. Align the transparency document with the upper right-hand corner of the transparency document guide.
-
Page 8: Scanning Normal (Reflective) Documents
Scanning Normal (Reflective) Documents When you return to scanning normal reflective documents, you should always insert the reflective document mat included with this unit. Also, make sure you remove the transparency document guide from the scanners document table. Insert the reflective document mat as described below. 1.