Table of Contents
IndraControl VEP 30.6, VEP 40.6,
VEP 50.6 Embedded Terminals
Technical data and B10d value of the E-STOP button are specified in
"E-STOP button (VEP30.6)" on page
8.2 CE marking
8.2.1 Declaration of conformity
The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2004/108/EC
The electronic products described in the present operating instructions are in-
tended for use in industrial environments and comply with the following require-
ments:
Standard
Title
DIN EN 61000-6-4
Electromagnetic compatibility (EMC)
(VDE 0839-6-4)
Part 6-4: Generic standards – Emission standard for indus-
trial environments (IEC 61000-6-4:2006)
DIN EN 61000-6-2
Electromagnetic compatibility (EMC)
(VDE 0839-6-2)
Part 6-2: Generic standards – Noise immunity for industrial
environments (IEC 61000-6-2:2005)
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device.
CE marking applies only to the device upon delivery. After modifying
the device, verify the CE conformity.
8.3 UL/CSA certified
The devices are certified according to
UL508 (Industrial Control Equipment) and
●
C22.2 no. 142-M1987 (CSA)
●
UL file no. E210730
However, there can be combinations or extension stages with a limited or miss-
ing certification. Thus, verify the registration according to the UL marking on the
device.
10.
R911403058_Edition 01 Bosch Rexroth AG
15/49
Standards
chapter 7.2
Edition
September 2007
March 2006
Table of Contents
