If You're Running Windows Nt 4.0 - Epson Expression 800 Setup Manual
Epson expression 800: install guide
Hide thumbs
Also See for Expression 800:
- Reference manual (92 pages) ,
- User manual (76 pages) ,
- Product support bulletin (12 pages)
Table of Contents
5. You see a screen indicating that
Windows is ready to install the best
driver for this device. Click
begin driver installation.
6. If your system stops installation to
request the file
your Windows operating system
CD-ROM in the CD-ROM drive
and click
7. When you see a screen indicating that
installation is complete, click
The Add New Hardware Wizard closes, and you return to the Windows desktop.
8. Verify that the scanner is listed in the Windows Device Manager. (Click
Settings
Manager tab and double-click
EPSON Scanners
should appear in the list.)
If You're Running Windows NT 4.0. . .
Depending on how your computer system was originally set up, you may be asked to
insert your Windows NT CD-ROM during the scanner installation. Please have your
CD-ROM handy, in case it is needed.
1. Turn on your scanner first; then turn on your computer.
2. Log onto Windows NT.
3. Wait until you see the Windows desktop icons, then click
.
Panel
18
Next
, insert
essiscnb.dll
to continue.
OK
,
, then double-click the
Control Panel
if you're running Windows 95.
to
Finish.
System
if you're running Windows 98, or
Image Device
icon. Select the Device
EPSON Expression800
,
Start
Settings
,
Start
,
Control
Table of Contents
