Lights And Buttons; Transporting The Scanner; Transporting The Transparency Unit - Epson Expression 800 Product Information Manual
Epson expression 800: product information
Hide thumbs
Also See for Expression 800:
- Reference manual (92 pages) ,
- Setup manual (81 pages) ,
- User manual (76 pages)
Table of Contents
Lights and Buttons
The scanner has three indicator lights and two buttons. Light
status and button functions are described in the tables below.
ERROR light
READY light
OPERATE light
RESET button
OPERATE button
Scanner indicator lights
Light
Light status
OPERATE
N
O
READY
N
F (flashing)
ERROR
N
F (rapidly flashing)
N = on, O = off, F = flashing
Error conditions
ERROR light
READY light
N
N
O
F
F
F
O
O
Color
Scanner status
Green
Initializing or busy
scanning
N/A
Scanner is turned off
Green
Ready to scan images
Green
Scanning in progress
Red
An error has occurred
Error type
Command error: The scanner has
received incorrect commands from
the scanning software. Try rescanning.
Interface error: Make sure the scanner
is securely connected to the
computer, then press RESET.
Fatal error: Make sure the
transportation lock is released, then
press RESET.
Option error: There's a problem with
the TPU or ADF unit. Consult your
EPSON dealer.
Scanner buttons
Button
Function
OPERATE
Turns the scanner on and off.
P
Resets the scanner after an error. (Pressing this button
RESET
while scanning is in progress stops the scanner and
may cause an error.)
Transporting the Scanner
When you transport the scanner a long distance or store it for
an extended time, follow the steps below to secure the
carriage:
1. Make sure the transportation lock on the back of the
scanner is in the UNLOCK position.
2. Locate the SCSI ID rotary switch on the back of the
scanner. Align the dot on the switch with the asterisk (*)
setting.
3. If you're using a transparency unit or auto document feeder,
remove it and replace the scanner cover.
4. Turn on the carriage and wait until the carriage moves to
the home position (toward the back of the scanner). Then
turn off the scanner.
5. Slide the transportation lock to the LOCK position.
If the carriage doesn't automatically return to the home
position, slowly raise the front of the scanner and hold it up
until the carriage comes to rest in the home position. Then
slide the transportation lock to the LOCK position.
Transporting the Transparency Unit
After you've removed the transparency unit from the scanner,
prepare it for shipping as follows:
1. Slowly raise the front of the transparency unit to allow the
lamp assembly to slide to the back of the unit. Wait until
the lamp assembly comes to rest.
2. Reinstall the transparency unit's shipping screw in the hole
marked CLAMP.
1/99
EPSON Expression 800
EPSON Expression 800
- 5
Table of Contents
