Quick Links
Navigation
- Navigate up and down by scrolling or pressing the control wheel or using the front dial.
- Navigate left and right by pressing the sides of the control wheel or using the rear dial.
Reset All
Format Memory Card
- Press the MENU button, located to the left of the viewfi nder.
- Go to the Setup menu (
- Go to the Setup menu (
Reset Camera Settings
- Press the MENU button.
- Go to the Setup menu (
- Go to the Setup menu (
RESOLUTION
File Format
- Press the MENU button.
- Go to the Camera menu (
- Go to the Camera menu (
- The fi le formats available are XAVC S 4K, XAVC S HD, AVCHD, and MP4. If shooting in 4K, choose
the XAVC S 4K option for best results.
Record Setting
- Press the MENU button.
- Go to the Camera menu (
- Go to the Camera menu (
- Here, you can choose your framerate and bitrate.
α
SONY
7S II STARTUP GUIDE
REAR DIAL
MENU
CONTROL WHEEL
) > page 5 > Format > Enter.
) > page 5 > Format > Enter.
) > page 6 > Reset > Camera Settings Reset.
) > page 6 > Reset > Camera Settings Reset.
) > page 2 > File Format.
) > page 2 > File Format.
) > page 2 > Record Setting.
) > page 2 > Record Setting.
FRONT DIAL
Page 1 of 4
Related Manuals for Sony Alpha 7S II
Summary of Contents for Sony Alpha 7S II
- Page 1 α SONY 7S II STARTUP GUIDE REAR DIAL FRONT DIAL MENU CONTROL WHEEL Navigation - Navigate up and down by scrolling or pressing the control wheel or using the front dial. - Navigate left and right by pressing the sides of the control wheel or using the rear dial.
- Page 2 α SONY 7s II STARTUP GUIDE White Balance Set Custom White Balance - Press the MENU button. Navigate to Camera > page 5 > White Balance > Custom Setup. - Capture your custom white within the ring, and select your register as Custom 1, 2, or 3.
- Page 3 α SONY 7s II STARTUP GUIDE Viewfinder guides Zebra (Exposure) - Press the MENU button. - Navigate to the Setup menu > page 1 > Zebra, and select your level. Focus Peaking - Press the MENU button. - Navigate to the Setup menu > page 2 > Peaking Level, and select your level.
- Page 4 5. Locate this button on the side of the Metabones adapter. 6. Hold the button down as you mount it to your Sony camera body (align the dots). The camera should display an F-stop value on the bottom of the screen if properly mounted.