Trouble Shooting - Bosch DWB068G60I Instruction Manual

Hide thumbs Also See for DWB068G60I:
Table of Contents

Trouble shooting

en
3Trouble shooting
M alfunctions often have simple explanations. Please
T r o u b l e s h o o t i n g
read the following notes before calling the after-sales
service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Replacing the LED lights for DIB098G50I,
DIB128G50I and DIG098G50I
Defective LED lights may be replaced by the
manufacturer, their after-sales service or a qualified
technician (electrician) only.
Replacing the LED lights for DWB068G50I,
DWB098G50I, DWB068G60I and
DWB098G60I
:
Warning – Risk of electric shock!
When changing the bulbs, the bulb socket contacts are
live. Before changing the bulb, unplug the appliance
from the mains or switch off the circuit breaker in the
fuse box.
:
Warning – Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than
100 seconds.
Important! Only use bulbs of the same type and
wattage.
Allow the bulb to cool down.
1.
Undo the screw that fastens the bulb cover.
2.
Remove the bulb cover.
3.
Remove the bulb and replace it with a bulb of the
4.
same type.
Replace the bulb cover and screw it on tightly.
5.
Plug in the mains plug and switch the fuse back on.
6.
10
Replace the bulb with one of the same type:
Voltage: 230 V
Power: Max. 2 W
Thread: E14
Malfunction table
Problem
Possible cause
The appliance
The plug is not
does not work
plugged in.
Power cut
Faulty fuse
The lighting does
The bulbs are
not work.
faulty.
--------
Solution
Connect the appliance to the
electricity supply
Check whether other kitchen
appliances are working
Check in the fuse box to make
sure that the fuse for the appli-
ance is OK
For information on changing
the bulbs, see the "Replacing
Bulbs" section.
Table of Contents
loading

Table of Contents