Related Manuals for Haier HWM105-M186
Summary of Contents for Haier HWM105-M186
- Page 1 TWIN-TUB WASHING MACHINE OWNER’S MANUAL MODEL HWM105-M186 HWM130-M186 HWM150-M186 Please read this manual carefully before operating your washing machine and retain it for future reference.
-
Page 2: Table Of Contents
CONTENTS Safety precautions Packing list Machine components Installation and adjustment Pre-wash preparation Washing sequence Disposal after washing Troubleshooting Specifications... -
Page 3: Safety Precautions
Safety precautions Meaning and description of the symbols Contents marked with this symbol are related to the safe use of Warning sign the product and the personal safety of the user. Please operate in accordance to the contents of this manual,to avoid harm to the user or damage to the machine itself. - Page 4 Safety precautions Do not stretch hands into the working machine.It is dangerous even if the rotation is slow. Take special care of the children. This appliance is not intended for use by persons (including children) witheduce physical,sensory or mental capabilities of, lack of experience and knowledge,unless they have been given supervision or instruction conceming use of the appliance by a person responsible for their safety.
-
Page 5: Packing List
Draining hose (on model HWM130-M186,HWM150-M186) Bottom leg Five (on models HWM130-M186,HWM150-M186) Machine components On model HWM105-M186. Spin time Wash time Wash selector If you wish to set it for less Intensity can be set to If to set less than 1 min,in than 2 min,you should first standard,soft and drain. - Page 6 Machine components On models HWM130-M186,HWM150-M186. Spin timer Wash timer Wash selector Drain If you wish to set it Intensity can be If to set less than 1 min, Warning:do not for less than 2 min, set to standard, in order to ensure a set the switch on you should first turn soft.
-
Page 7: Installation And Adjustment
On model HWM105-M186 On models HWM130-M186,HWM150-M186 Drain hose usage Drain hose drainage should be smooth and unobstructed. 1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth enough and cause incomplete drainage. - Page 8 Installation and adjustment Change the direction of the drain hoses On model HWM105-M186 Figure 1 shows the factory installation position of the drain hose. Figure 1 drain hose fixing hook Extend the drain hose from the spin tub side: Side Section View 1.Remove the drain hose from the hanging hole on...
- Page 9 Installation and adjustment Install the washer legs Only on models HWM130-M186,HWM150-M186 1.Carefully tilt the washing machine to the back and install the bottom legs at the front of the base.Make sure that the legs are installed in place.(Figure 1). 2.Carefully tilt the washing machine to front and install the bottom legs at the back of the base.Make sure that legs are installed in place.(Figure 2) Bottom legs Bottom legs...
-
Page 10: Pre-Wash Preparation
Pre-wash Preparation Basic know-how The maximum capacity during washing and spinning cycles refers to the max weight of standard dry laundry that can be washed or spun at one time.The laundry quantity during one washing cycle should be lower than the rated capacity. Thickness,size,and the type of cloth will influence actual washing capacity.It is acceptable to put in a reasonable amount of laundry as the laundry will be mixed around... - Page 11 Pre-wash Preparation Detergent use How to add detergent: Method 1 - directly dissolving in the machine: 1.Add a small quantity of water to the machine. 2.Add the detergent power.Run washing machine for 30 seconds to dissolve powder completely. 3.Place laundry into the washing machine and select a suitable water level. Method 2 - instantly dissolving the detergent powder: 1.Prepare warm water at 30°C and a container.
-
Page 12: Washing Sequence
Washing sequence Washing 1.Inlet selector Set the selector to “WASH”.(Figure1) Figure 1 2.Add water Machine begins to dispense detergent uniformly.(Figure2) Figure 2 3.Put in the wash load. Add more water as necessary.(Figure3) Figure 3 4.Select intensity. Select “SOFT” or “STANDARD” water flow intensity according to the wash load.(Figure4) Figure 4 5.Select wash time. - Page 13 Washing sequence Mid-wash spin cycle 1. Put the laundries into the spin tub evenly and smoothly. 2.Spin: a.Distribute the laundry into the spin tub smoothly and evenly. Note: the gland must be inserted properly even if the laundry quantity is small. Push Gland Push...
- Page 14 Washing sequence The rinse cycle Rinse with water-filling 1.Place laundry into the washing machine. Place laundry into the washing machine. Select the appropriate current according to the laundries. 2.Add water. Add the appropriate amount of water. 3.Rinse. Adjust the wash timer to 5-7 minutes for the rinse cycle. Rinsing with stored water (Repeat the mid-wash spin cycle and rinse cycle with stored water 2-3 times) 1.Place laundry into the washing machine.
-
Page 15: Disposal After Washing
Please remove the plug from the power outlet first before cleaning. Cleaning the lint filter On Model HWM105-M186 The lint filter should always be used during washing and should be cleaned after each use in a timely fashion. - Page 16 Disposal after washing Cleaning the lint filter On Models HWM130-M186,HWM150-M186 The lint filter should always be used during washing and should be cleaned after each use in a timely fashion. 1.To remove the lint filter, first press the elastic piece at the upper end of the filter to release the tab from the filter cover, then pull outward.
- Page 17 Disposal after washing Cleaning the overflow filter On Model HWM105-M186 Too much lint in the overflow filter will influence normal usage of the machine. Remember to clean it once every two months. Elastic fixing claw 1.Take off the overflow filter.
- Page 18 Disposal after washing Cleaning the overflow filter On Models HWM130-M186,HWM150-M186 Too much lint in the overflow filter will influence normal usage of the machine. Remember to clean it once every two months. Elastic fixing claw 1.Take off the overflow filter. Nip the elastic fixing claw and pull in the direction of the arrow to remove (as demonstrated in the figure to the right).
-
Page 19: Troubleshooting
Troubleshooting When the remaining water is frozen Prevent the freezing Pour hot water below 50°C (be sure to drain the water into the wash cycle completely after each use) Below 50 °C compartment to soak it After completely draining, set 2~3L completely, then using the “WASH SELECTOR”... -
Page 20: Specifications
Specifications HWM105-M186 Model HWM130-M186 HWM150-M186 Rated Voltage 220-240V~ 220-240V~ 220-240V~ Rated Frequency 50Hz 50Hz 50Hz Washing Capacity 10.5kg 13kg 15kg Spinning Capacity 10kg 10kg 0.02-0.2Mpa Injection pressure 0.02-0.2Mpa 0.02-0.2Mpa MAX/89L,MID/76L 4(Max)/97L,3/81L, 4(Max)/102L,3/85L, Water level/Water quantity (approximately) MIN/65L 2/60L,1/39L 2/62L,1/41L MADE IN CHINA...