Sony HCD-GPX5 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. HCD-GPX5
  6. Service manual

Sony HCD-GPX5 Service Manual

Hide thumbs
Table of Contents

Quick Links

SERVICE MANUAL
Ver 1.0 2004.04
HCD-GPX5 is the amplifier, CD player, tape deck
and tuner section in CMT-GPX5.
Amplifier section
UK model:
DIN power output (rated): 40 + 40 W (6 ohms at 1
kHz, DIN)
Continuous RMS power output (reference):
50 + 50 W (6 ohms at 1
kHz, 10% THD)
Music power output (reference):
90 + 90 W
AEP model:
DIN power output (rated): 30 + 30 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
Music power output (reference):
60 + 60 W
Inputs
MD/VIDEO:
Sensitivity 450/250 mV,
impedance 47 kilohms
Outputs
PHONES:
Accepts headphones with
an impedance of 8 ohms or
more
SPEAKER:
Accepts impedance of 6 to
16 ohms.
Sony Corporation
9-877-795-01
2004D05-1
Home Audio Company
© 2004.04
Published by Sony Engineering Corporation
HCD-GPX5
Model Name Using Similar Mechanism
CD Mechanism Type
CD
Section
Base Unit Name
Optical Pick-up Block Name
Model Name Using Similar Mechanism
Tape deck
Section
Tape Transport Mechanism Type
SPECIFICATIONS
CD player section
Laser
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Frequency response
20 Hz – 20 kHz
Wavelength
780 – 790 nm
Tape deck section
Recording system
4-track 2-channel, stereo
Frequency response
50 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassettes
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
COMPACT DISC DECK RECEIVER
AEP Model
UK Model
NEW
CDM80B-K6BD80A
BU-K6BD80A
KSM-213DAP
NEW
CMAL1Z234A
Antenna
AM loop antenna, external
antenna terminal
Intermediate frequency
450 kHz
General
Power requirements
230 V AC, 50/60 Hz
Power consumption
UK model:
95 W
0.25 W (in Power Saving
Mode)
AEP model:
80 W
0.25 W (in Power Saving
Mode)
Approx. 181.5 × 261.5 ×
Dimensions (w/h/d)
357.5 mm incl. projecting
parts and controls
Mass
Approx. 5.8 kg
Design and specifications are subject to change
without notice.
Table of Contents
loading

Related Manuals for Sony HCD-GPX5

Summary of Contents for Sony HCD-GPX5

  • Page 1 HCD-GPX5 SERVICE MANUAL AEP Model UK Model Ver 1.0 2004.04 HCD-GPX5 is the amplifier, CD player, tape deck and tuner section in CMT-GPX5. Model Name Using Similar Mechanism CD Mechanism Type CDM80B-K6BD80A Section Base Unit Name BU-K6BD80A Optical Pick-up Block Name...
  • Page 2 IC pins, etc. OPERATION. REPLACE THESE COMPONENTS WITH • Usable with ordinary solder SONY PARTS WHOSE PART NUMBERS APPEAR AS It is best to use only unleaded solder but unleaded solder may SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- also be added to ordinary solder.

  • Page 3: Table Of Contents

    HCD-GPX5 TABLE OF CONTENTS SERVICING NOTES EXPLODED VIEWS ..........4 7-1. Side Plates Section ............48 GENERAL 7-2. Front Panel Section ............49 7-3. Top Block Section ............50 Location of Controls ............6 7-4. MAIN Section ..............51 7-5. Chassis Section ............... 52 DISASSEMBLY 7-6.

  • Page 4: Servicing Notes

    HCD-GPX5 SECTION 1 SERVICING NOTES NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body.
  • Page 5 HCD-GPX5 – CD MECHANISM DECK – CD mechanism deck – AMP BOARD – 2 Remove the AMP board from heat sink. heat sink 1 two screws × (BVTP3 AMP board heat sink...

  • Page 6: General

    HCD-GPX5 SECTION 2 This section is extracted from instruction manual. GENERAL • LOCATION OF CONTROLS Main unit ALPHABETICAL ORDER BUTTON DESCRIPTIONS ?/1 (power) 1 A – O P – Z ./> (CD skip back/skip BASS +/– wk PHONES jack wd forward) w;...
  • Page 7 HCD-GPX5 Setting the cl ock Remote control ALPHABETICAL ORDER BUTTON DESCRIPTIONS Use buttons on the remote for the operation. ?/1 (power) 1 A – O P – Z Press ?/1 to turn on the system. m/M (rewind/fast forward) ALBUM +/– qa PLAY MODE qk Press CLOCK/TIMER SET.

  • Page 8: Disassembly

    HCD-GPX5 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. SIDE PLATE (L)/(R) (Page 9) 3-3. TOP BLOCK ASSY (Page 9) 3-5. FRONT PANEL 3-4. TAPE MECHANISM DECK SECTION (CMAL1Z234A) (Page 10) (Page 10) 3-6.

  • Page 9: Side Plate (L)/(R)

    HCD-GPX5 Note: Follow the disassembly procedure in the numerical order given. 3-2. SIDE PLATE (L)/(R) 1 screw × (BVTP3 5 side plate (L) 2 two screws × (BVTT3 6 screw × (BVTP3 3 screw × (BVTP3 4 two screws 7 two screws ×...

  • Page 10: Tape Mechanism Deck (Cmal1Z234A)

    HCD-GPX5 3-4. TAPE MECHANISM DECK (CMAL1Z234A) 3 tape mechanism deck 2 harness (CMAL1Z234A) 1 four screws × (BVTP3 3-5. FRONT PANEL SECTION 2 connector (CN311) 1 wire (flat type) (21 core) (CN310) 5 front panel section 4 Open the plate.

  • Page 11: Main Board

    HCD-GPX5 3-6. MAIN BOARD 4 heat sink cover 3 two screws × (BVTT3 2 three connectors qa connector (CN301) (CN603, 605, 901) (UK) 0 wire (flat type) (15 core) (CN305) 0 wire (flat type) (27 core) (CN304) 7 three screws 6 connector ×...

  • Page 12: Base Unit (Bu-K6Bd80A)

    HCD-GPX5 3-8. BASE UNIT (BU-K6BD80A) 5 CD mecha bracket (R) block 1 wire (flat type) (17 core) (CN702) 3 CD mecha bracket (L) 2 two screws × (BVTT3 4 two screws × (BVTP3 qd base unit (BU-K6BD80A) 9 two insulators...

  • Page 13: Driver Board

    HCD-GPX5 3-10. DRIVER BOARD 2 two screws (BVTP 2.6 × 8) 5 DRIVER board Remove two solders. 4 motor (pully) assy (loading) 1 belt (MOT) 3-11. CHASSIS (TOP) 4 three screws 1 screw (BVTP 2.6 × 8) (BVTP 2.6 × 8) 3 two screws (P 2 ×...

  • Page 14: Lever (Loading-L/R)

    HCD-GPX5 3-12. LEVER (LOADING-L/R) SPT-T (loading-R) SPT-T (loading-L) 5 lever (loading-R) 2 two hooks 4 two hooks 3 lever (loading-L) PRECAUTION DURING LEVER (LOADING R / L) INSTALLATION – Bottom view – Align the horizontal position. lever (loading-L) lever (loading-R) Install the both levers so that they move symmetrically.

  • Page 15: Lever (Disc Sensor)/(Disc Stop)

    HCD-GPX5 3-13. LEVER (DISC SENSOR)/(DISC STOP) 1 gear (cap) 2 gear (IDL L) PRECAUTION DURING DISC STOP LEVER INSTALLATION chassis (top) hole 5 two hooks 3 two claws lever (disc stop) 6 lever (disc stop) hole Install the lever (disc stop) so that the both holes are aligned.

  • Page 16: Lever (Bu Lock)

    HCD-GPX5 3-15. LEVER (BU LOCK) 1 floating screw (PTPWH M2.6) 5 lever (BU lock) 4 three hooks 2 gear (cap) 3 gear (BU lock) 3-16. CLOSE LEVER 1 washer (3-1-0.4) 5 close lever 3 claw SPR-E lever close 4 shaft disc stop...

  • Page 17: Lever (Dir), Gear (Idl-B)

    HCD-GPX5 3-17. LEVER (DIR), GEAR (IDL-B) 3 nylon washer 1.7 2 claw 4 pulley (gear) washer 5 gear (cap) 6 gear (IDL-A) 9 stoper 0 lever (DIR) qa gear (IDL-B) 1 DIR SPR-E 7 Loosen the screw. 8 Hold the release lever and change the direction.

  • Page 18: Test Mode

    HCD-GPX5 SECTION 4 TEST MODE [MC COLD RESET] [PANEL TEST MODE] The cold reset clears all data including preset data stored in the Enter The Panel Test Mode memory to initial conditions. Execute this mode when returning Procedure: the set to the customer.
  • Page 19 HCD-GPX5 [CD REPEAT 5 LIMIT CANCEL MODE] [MD/VIDEO FUNCTION CHANGE] Number of repeat for CD playback is 5 times when the repeat Select either VIDEO or MD of the external input. mode is “REPEAT”. This mode enables CD to repeat playback for Procedure: limitless times.

  • Page 20: Electrical Adjustments

    HCD-GPX5 SECTION 5 ELECTRICAL ADJUSTMENTS DECK SECTION 1. Demagnetize the record/playback head with a head demagnetizer. 2. Do not use a magnetized screwdriver for the adjustments. 3. After the adjustments, apply suitable locking compound to the parts adjust. 4. The adjustments should be performed with the rated power supply voltage unless otherwise noted.

  • Page 21: Cd Section

    HCD-GPX5 CD SECTION Note: CD Block is basically constructed to operate without adjustment. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. Use an oscilloscope with more than 10 MΩ impedance. Clean the object lens by an applicator with neutral detergent when the signal level is low than specified value with the following checks.

  • Page 22: Diagrams

    HCD-GPX5 SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM – CD SERVO Section – FILTER XTSL CD DSP XTAO IC101 (1/2) CLOCK X171 48 50 47 49 DETECTOR CD +3V XTAI GENERATOR 16.9344MHz XTACN RFACO RFACI AOUT1 RFAC ASYMMETRY (Page 23) SUMMING...

  • Page 23: Block Diagram - Main Section

    HCD-GPX5 6-2. BLOCK DIAGRAM – MAIN Section – AC DET (Page 24) HP SW (Page 24) J301 INPUT SELECT, R-CH J321 MD IN L TONE CONTROL, POWER ON ELECTRICAL VOLUME PHONES MUTING IC302 MD/VIDEO Q601 R-CH TONE IN L OUT L...

  • Page 24: Block Diagram - Panel/Power Supply Section

    HCD-GPX5 6-3. BLOCK DIAGRAM – PANEL/POWER SUPPLY Section – SYSTEM CONTROLLER FL/LED DRIVER IC306 (3/3) IC801 REMOTE CONTROL GR1 – GR12 RECEIVER SIRCS IN/ FL701 IC802 WAKE FLUORESCENT INDICATOR TUBE SG1 – SG16 FL DATA FL CLK D801 S701 – 708, KEY1 –...

  • Page 25: Note For Printed Wiring Boards And Schematic Diagrams

    HCD-GPX5 • Circuit Boards Location 6-4. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. (p: pF) •...

  • Page 26: Printed Wiring Board - Bd Board

    HCD-GPX5 PRINTED WIRING BOARD – BD Board – • 6-5. :Uses unleaded solder. See page 25 for Circuit Boards Location. OPTICAL PICK-UP BLOCK (KSM-213DAP) BD BOARD C116 C123 JW118 JR109 C122 C117 JR108 R121 R131 JR105 R111 JR111 R112 C131...

  • Page 27: Schematic Diagram - Bd Board

    HCD-GPX5 SCHEMATIC DIAGRAM – BD Board – • • 6-6. See page 42 for IC Block Diagrams. See page 29 for Waveforms. CN201 XTACN TP29 XTACN C201 C182 C181 AGND DOUT TP31 DOUT R161 AVDD R201 TP32 AVDD LOUT TP33...

  • Page 28: Printed Wiring Board - Driver Board

    HCD-GPX5 PRINTED WIRING BOARD – DRIVER Board – • SCHEMATIC DIAGRAM – DRIVER Board – • 6-7. 6-8. See page 25 for Circuit Boards Location. See page 42 for IC Block Diagram. :Uses unleaded solder. LOADING MOTOR DRIVE S702 IC701...

  • Page 29: Printed Wiring Board - Cn Board

    HCD-GPX5 PRINTED WIRING BOARD – CN Board – • • Waveforms 6-9. See page 25 for Circuit Boards Location. :Uses unleaded solder. – BD Board – – MAIN Board – IC101 w; (TEI) Q303, 304 (Collector) (CD Play Mode) (REC Mode) MAIN BOARD Approx.

  • Page 30: Printed Wiring Board - Main Board

    HCD-GPX5 6-10. PRINTED WIRING BOARD – MAIN Board – • :Uses unleaded solder. See page 25 for Circuit Boards Location. • Semiconductor Location Ref. No. Location TAPE MECHANISM DECK BLOCK HRP350 FM/AM TUNER UNIT D301 (UK) M301 SUPPLIED WITH THE...

  • Page 31: Schematic Diagram - Main Board (1/3)

    HCD-GPX5 6-11. SCHEMATIC DIAGRAM – MAIN Section (1/3) – • • See page 29 for Waveforms. See page 42 for IC Block Diagram. (1/3) CN306 ST CLK ST DOUT SIGNAL L ST DIN SIGNAL GND ST CE SIGNAL R AC DET(SWTCHING) FM 75Ω...

  • Page 32: Schematic Diagram - Main Board (2/3)

    HCD-GPX5 6-12. SCHEMATIC DIAGRAM – MAIN Section (2/3) – • • See page 29 for Waveforms. See page 45 for IC Pin Function Description. (Page 31) (2/3) Q308,309 PLUNGER DRIVE R311 R312 Q308 R358 R359 R362 R474 Q309 KTA1271Y-AT C314 KRC402-RTK 0.0047...

  • Page 33: Schematic Diagram - Main Board (3/3)

    HCD-GPX5 6-13. SCHEMATIC DIAGRAM – MAIN Section (3/3) – (Page 31) (3/3) TM301 CN309 R CH R GND SPEAKER RELAY - L GND IMPEDANCE RELAY + L102 USE 6−16Ω L CH D314 GND RCH 1SS133T-72 GND LCH L202 SP OUT LCH...

  • Page 34: Printed Wiring Board - Amp Board

    HCD-GPX5 6-14. PRINTED WIRING BOARD – AMP Board – • See page 25 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location D501 AMP BOARD D551 D603 D607 D608 D609 D610 D611 D612 IC601 IC602 Q501...

  • Page 35: Schematic Diagram - Amp Board

    HCD-GPX5 6-15. SCHEMATIC DIAGRAM – AMP Board – • See page 42 for IC Block Diagram. C609 D610 POWER AMP 1SS133T-72 IC601 STK433-040 (AEP) STK433-060 (UK) (UK) R616 R618 R619 PROTECT CONTROL R626 D608 IC602 1SS133T RT8H015C-T112-1 Q608 KTC3199GR-RTK R617...

  • Page 36: Printed Wiring Board - Panel (1) Board

    HCD-GPX5 6-16. PRINTED WIRING BOARD – PANEL (1) Board – • See page 25 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location PANEL (1) BOARD D802 D803 C840 C841 Q808 R857 D804 R856 D805 D805...

  • Page 37: Schematic Diagram - Panel (1) Board

    HCD-GPX5 • 6-17. SCHEMATIC DIAGRAM – PANEL (1) Board – See page 42 for IC Block Diagram. FL701 FLUORESCENT INDICATOR TUBE S801 S802 S803 ROTARY ENCODER ROTARY ENCODER ROTARY ENCODER BASS TREBLE VOLUME REMOTE CONTROL RECEIVER IC802 RPM7240 C811 C810...

  • Page 38: Printed Wiring Board - Panel (2) Board

    HCD-GPX5 6-18. PRINTED WIRING BOARD – PANEL (2) Board – • :Uses unleaded solder. See page 25 for Circuit Boards Location. PANEL (2) BOARD S718 – 726 J321 PHONES S720 S721 R823 D801 JW43 R822 S719 S718 R824 D801, S724...

  • Page 39: Schematic Diagram - Panel (2) Board

    HCD-GPX5 6-19. SCHEMATIC DIAGRAM – PANEL (2) Board – S726 R828 R827 R826 R825 R824 R823 R822 R821 4.7k 2.2k 1.5k CN803 FB221 S725 S724 S723 S722 S721 S720 S719 S718 KEY2 FB121 J321 KEY3 PHONES REPEAT PLAY MODE LED-CD+...

  • Page 40: Printed Wiring Board - Power Board

    HCD-GPX5 6-20. PRINTED WIRING BOARD – POWER Board – • See page 25 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location MAIN BOARD Ref. No. Location CN307 AMP BOARTD (Page 30) CN602 D901 (Page 34) POWER BOARD D902...

  • Page 41: Schematic Diagram - Power Board

    HCD-GPX5 6-21. SCHEMATIC DIAGRAM – POWER Board – D906 D908 1N4002 1N4002 D902 D904 1N4002 1N4002 +10V REGULATOR IC901 TA7810S D907 D909 1N4002 1N4002 D903 D905 1N4002 1N4002 C909 C901 C902 C907 3300 C912 T901 MAIN POWER CN901 TRANSFORMER D910...
  • Page 42 HCD-GPX5 • IC Block Diagrams IC251 BA5947FM – BD Board – IC101 CXD3058AR 108 107 105 104 103 102 112 111 MUTING CPU INTERFACE + – INTERFACE SERVO INTERFACE LEVEL SHIFT 84 RMUT INTERFACE 83 IOVDD0 INTERFACE 82 AVDD2 81 AOUT2...
  • Page 43 HCD-GPX5 – MAIN Board – IC302 BD3402KS2 56 55 54 53 52 51 48 NC 47 NC 46 NC 45 NC 44 BNF1 43 BOUT1 − 42 BOUT2 41 BNF2 INPUT SELECT − PBNF2 PBOUT2 BUFFER 40 NC PBOUT1 −...
  • Page 44 HCD-GPX5 – AMP Board – IC602 RT8H015C-T112-1 OVER LOAD DETECT DETECT – PANEL (1) Board – IC801 µPD16315GB-3BS LED1 LED2 4-BIT LATCH LED3 LED4 GRID 12-BIT SHIFT DRIVER REGISTER KEY DATA MEMORY 33 SEG19/GRID10 (2 x 16 BITS) 32 SEG18/GRID11...
  • Page 45 HCD-GPX5 • IC Pin Function Description MAIN BOARD IC306 M3062CMEN-A07FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description CD DISCSENS 2 Not used Not used CD DISCSENS 1 STBY LED LED drive signal output terminal (power) SIRCS SIRCS signal input terminal...
  • Page 46 HCD-GPX5 Pin No. Pin Name Description SW3 (PUSH- CD push-close switch input terminal Not used CLOSE) CD close switch input terminal Not used SW2-1 (CLOSE) SW2-2 (LOD CD loading position switch input terminal Not used POSITION) SW1 (OPEN) CD open switch input terminal Not used...
  • Page 47 HCD-GPX5 Pin No. Pin Name Description PROTECT Protect signal input from the amplifier circuit “L”: protect SP RELAY Speaker on/off relay drive signal output terminal “L”: speaker off AMP POWER AMP muting on/off control signal output terminal “H”: AMP on...

  • Page 48: Exploded Views

    HCD-GPX5 SECTION 7 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by may have some difference from the original are seldom required for routine service. Some mark 0 or dotted line with mark 0 are critical for safety.

  • Page 49: Front Panel Section

    HCD-GPX5 7-2. FRONT PANEL SECTION not supplied not supplied not supplied not supplied supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-251-909-01 KNOB, VOLUME 4-951-620-01 SCREW (2.6X8), +BVTP A-4750-229-A PANEL (2) BOARD, COMPLETE 4-251-910-01 KNOB, B/T...

  • Page 50: Top Block Section

    HCD-GPX5 7-3. TOP BLOCK SECTION not supplied supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-4956-091-1 HOLDER ASSY, CASSETTE 4-224-104-41 DAMPER 3-701-748-00 CLAMP 4-251-899-01 SPRING, CASSETTE 4-251-898-01 CABINET, TOP 1-796-351-41 MECHANISM, SIGNAL CASSETTE...

  • Page 51: Main Section

    HCD-GPX5 7-4. MAIN SECTION CD mechanism deck section-1 (CDM80B-K6BD80A) not supplied not supplied not supplied not supplied (CN board) not supplied not supplied chassis section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1052-739-A MAIN BOARD, COMPLETE (UK)

  • Page 52: Chassis Section

    HCD-GPX5 7-5. CHASSIS SECTION not supplied not supplied F901 F902 T901 not supplied not supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No.

  • Page 53: (Cdm80B-K6Bd80A)

    HCD-GPX5 7-6. CD MECHANISM DECK SECTION-1 (CDM80B-K6BD80A) CD mechanism deck section-2 (CDM80B-K6BD80A) BU-K6BD80A Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-249-825-01 SPR-E, HOLDER, DOWN, 213 4-231-151-01 STOPPER (BU) 4-218-253-31 +BTTP M2.6 X-4956-146-1 HOLDER (BU215) ASSY 4-985-672-01 SCREW (+PTPWHM2.6), FLOATING...

  • Page 54: (Cdm80B-K6Bd80A)

    HCD-GPX5 7-7. CD MECHANISM DECK SECTION-2 (CDM80B-K6BD80A) CD mechanism section-3 (CDM80B-K6BD80A) M701 CD mechanism section-4 (CDM80B-K6BD80A) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-245-630-01 LEVER (SW) 4-985-672-01 SCREW (+PTPWHM2.6), FLOATING 4-951-620-01 SCREW (2.6X8), +BVTP 4-245-653-01 BELT (MOT)

  • Page 55: Cd Mechanism Deck Section-3 (Cdm80B-K6Bd80A)

    HCD-GPX5 7-8. CD MECHANISM DECK SECTION-3 (CDM80B-K6BD80A) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-245-640-01 GEAR (CAP) 4-245-627-01 WASHER (6-2.7-0.4) 4-245-637-01 ROLLER, RUBBER 1-452-925-21 MAGNET ASSY 4-245-649-01 GEAR (IDL-I) 4-245-638-01 LEVER (CL UP1) 4-985-672-01 SCREW (+PTPWHM2.6), FLOATING...

  • Page 56: Cd Mechanism Deck Section-4 (Cdm80B-K6Bd80A)

    HCD-GPX5 7-9. CD MECHANISM DECK SECTION-4 (CDM80B-K6BD80A) supplied supplied supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-245-643-01 GEAR (IDL-C) 4-245-628-01 LEVER (BU LOCK) 4-248-722-01 SPR-E, DIR 4-248-206-01 WASHER (3-1-0.4) 4-245-642-01 GEAR (IDL-B) 4-245-624-01 LEVER, CLOSE...

  • Page 57: Base Unit Section (Bu-K6Bd80A)

    HCD-GPX5 7-10. BASE UNIT SECTION (BU-K6BD80A) (including M101 (spindle), M102 (sled)) not supplied M101 (spindle) not supplied M102 (sled) S101 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

  • Page 58: Electrical Parts List

    HCD-GPX5 SECTION 8 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark parts list may be different from the parts speci- are seldom required for routine service.
  • Page 59 HCD-GPX5 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R511 1-216-845-11 METAL CHIP 100K 1/10W A-4750-181-A BD BOARD, COMPLETE R512 1-260-076-11 CARBON 1/2W ******************* R513 1-216-841-11 METAL CHIP 1/10W 0 R514 1-215-890-11 METAL OXIDE < CAPACITOR >...
  • Page 60 HCD-GPX5 DRIVER MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R408 1-216-809-11 METAL CHIP 1/10W < CONNECTOR > R409 1-216-809-11 METAL CHIP 1/10W R410 1-216-809-11 METAL CHIP 1/10W CN101 1-793-907-11 CONNECTOR, FFC/FPC 16P R411 1-216-809-11 METAL CHIP...
  • Page 61 HCD-GPX5 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C238 1-162-960-11 CERAMIC CHIP 220PF C113 1-164-174-11 CERAMIC CHIP 0.0082uF 10% C241 1-126-964-11 ELECT 10uF C114 1-126-160-11 ELECT C302 1-137-150-11 FILM 0.01uF 100V C115 1-126-964-11 ELECT...
  • Page 62 HCD-GPX5 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > < SHORT > * CN301 1-564-511-11 PLUG, CONNECTOR 8P JW200 1-216-295-00 SHORT CHIP CN302 1-770-516-31 CONNECTOR, FFC 8P JW241 1-216-864-11 SHORT CHIP CN304...
  • Page 63 HCD-GPX5 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R123 1-216-821-11 METAL CHIP 1/10W R331 1-216-833-11 METAL CHIP 1/10W R124 1-216-845-11 METAL CHIP 100K 1/10W R332 1-216-829-11 METAL CHIP 4.7K 1/10W R126 1-247-855-11 CARBON 1/4W...
  • Page 64 HCD-GPX5 MAIN PANEL (1) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R453 1-216-809-11 METAL CHIP 1/10W C811 1-162-970-11 CERAMIC CHIP 0.01uF R455 1-216-809-11 METAL CHIP 1/10W C820 1-162-960-11 CERAMIC CHIP 220PF C821 1-162-960-11 CERAMIC CHIP...
  • Page 65 HCD-GPX5 PANEL (1) PANEL (2) POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R803 1-216-817-11 METAL CHIP 1/10W S802 1-418-859-21 ENCODER, ROTARY (TREBLE) R804 1-216-819-11 METAL CHIP 1/10W S803 1-476-730-11 ENCODER, ROTARY (VOLUME) R805 1-216-821-11 METAL CHIP...
  • Page 66 HCD-GPX5 POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C912 1-126-969-11 ELECT 220uF 0 F902 1-533-470-12 FUSE, GLASS TUBE (DIA. 5) (T3.15A/250V) C913 1-130-495-00 MYLAR 0.1uF (AEP) C914 1-130-495-00 MYLAR 0.1uF 0 F902 1-533-471-12 FUSE, GLASS TUBE (DIA. 5) (T4A/250V) (UK)
  • Page 67 HCD-GPX5 MEMO...
  • Page 68 HCD-GPX5 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision...

Table of Contents