Table of Contents
aus Basic operation
Starting the programme
Press
.
▶
a The programme has ended when
the display shows "Finished".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 34
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Tip: To assist the drying, we recom-
mend that the door will be partially
opened after the cycle.
Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
.
1.
a The programme is saved and the
appliance switches off.
Press
to resume the pro-
2.
gramme.
34
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Press
▶
4 seconds.
a All displays light up.
a As soon as the displays are off,
the display shows "Program was
terminated. " and then "Finished".
a The programme is cancelled and
ends after approx. 1 minute.
Display programme informa-
tion
You can show information about pro-
grammes and additional functions on
the display.
Press
.
1.
Press the programme button or an
2.
additional function.
Switching off appliance
Please note the information on
1.
"Safe use" → Page 10.
Press
.
2.
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
for approx.
during the wash
Table of Contents
