Operation & Use - Black & Decker BFSR16B Instruction Manual

ENGLISH

SET UP & USE

ASSEMBLY OF BASE & COLUMN UNIT

1. Unscrew the 7-shape Bolt from the Extension Pole. (see Fig. 1)

2. Insert the extension pole in the base and tighten the 7-shape Bolt. (see Fig. 2)

3. From the extension pole, loosen the height adjustment ring and adjust the

internal pipe to the desired height.

NOTE: If you can't find the internal pole, it has slid inside the extension pole. You

will need to retrieve it by pulling it out from the extension pole ( see Fig. 3).

4. To attach the upper portion of the fan to the extension pole, loosen the thumb

screw slightly on the bottom of the head unit. Place the head unit on the extension

pole and tighten the thumb screw in alignment with the groove on the internal

pole. (see Fig. 4).

CAUTION: Height adjustment ring must be fully fastened before the assembly of

Page 8

Page 8

the motor housing to the extension pole.

Fig. 1

Fig. 3

Loosen

Fig. 2

Fig. 4

Mounting Hole

Thumb Screw

Annular Groove