TABLE OF CONTENTS SPECIFICATIONS ..........................1 ALGEMEEN VEILIGHEIDSWAARSCHUWINGEN ELEKTRISCH GEREEDSCHAP ......1 Veiligheid werkgebied ......................... 1 Elektrische veiligheid .......................... 1 Persoonlijke veiligheid ........................2 Gebruik en verzorging van elektrisch gereedschap ................2 Gebruik en verzorging van gereedschap op batterijen ..............3 Service ..............................
SPECIFICATIONS Model WK-6221S Steel 10 mm (3/8") Wood 32mm (1-1/4") Capacities Wood screw 5.1 mm x 63 mm (7/32" X 2-1/2") Machine screw M6 (1/4") High (2) 0 - 1,350/min. No load speed (RPM) Low (1) 0 - 350/min. Chuck capacity 0.8 mm (1/32") - 10 mm (3/8")
19. Haal de stekker uit de voeding en/of de accu van het elektrische gereedschap voorafgaand aan het uitvoeren van enige afstellingen, het verwisselen van accessoires of het opslaan van elektrisch gereedschap. Dergelijke preventieve maatregelen verlagen het risico dat het elektrische gereedschap WK-6221S NL/2103.V01...
3. Houd het elektrische gereedschap vast aan geisoleerde grijpvlakken, bij het uitvoeren van een bewerking waarbij het bevestigingsmiddel contact kan maken met verborgen bedrading of het eigen snoer. Bevestigingsmiddelen die een spanningvoerende draad aanraken, kunnen blootgestelde metalen WK-6221S NL/2103.V01...
Het kan leiden tot gezichtsverlies. 5. Sluit de batterijcartridge niet kort: 1) Raak de klemmen niet aan met een geleidend materiaal. 2) Vermijd het opslaan van de batterijcartridge in een houder met andere metalen objecten, zoals spijkers, munten, enz. WK-6221S NL/2103.V01...
If not, it may accidentally fall out of the tool, causing injury to you or someone around you. Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. WK-6221S NL/2103.V01...
Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch trigger release, have tool serviced at a JAY-tech service center. Turning on the front lamp 1. Lamp CAUTION: Do not look in the light or see the source of the light directly.
Always set the speed change lever fully to the correct position. If you operate the tool with the speed change lever positioned halfway between the "1" side and "2" side, the tool may be damaged. Do not use the speed change lever while the tool is running. The tool may be damaged. WK-6221S NL/2103.V01...
1. Sleeve Turn the sleeve counterclockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Turn the sleeve clockwise to tighten the chuck. To remove the bit, turn the sleeve counterclockwise. WK-6221S NL/2103.V01...
If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery. Using the tool as a hand screwdriver Switch off the tool. Move the lock button to the locked position A. Turn the tool. NOTE: WK-6221S NL/2103.V01...
The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, please ask JAY-tech Service Center.
Page 14
We reserve the right to reject unrequested deliveries, or return the package at the sender’s expense. EU DECLARATION OF CONFORMITY Herewith the company JAY-tech GmbH declares that the described product complies with the EU directive 2014/30/EU and the other applicable for the product.