Acer Aspire 5230 Service Manual
  1. Manuals
  2. Brands
  3. Acer Manuals
  4. Laptop
  5. Aspire 5230
  6. Service manual

Acer Aspire 5230 Service Manual

Hide thumbs
Table of Contents

Quick Links

Aspire 5530 Series

Service Guide
Service guide files and updates are available
on the ACER/CSD web; for more information,
please refer to
http://csd.acer.com.tw
PRINTED IN TAIWAN
Table of Contents
loading

Related Manuals for Acer Aspire 5230

Summary of Contents for Acer Aspire 5230

  • Page 1: Aspire 5530 Series

    Aspire 5530 Series Service Guide Service guide files and updates are available on the ACER/CSD web; for more information, please refer to http://csd.acer.com.tw PRINTED IN TAIWAN...

  • Page 2: Revision History

    Revision History Please refer to the table below for the updates made on Aspire 5530 Series service guide. Date Chapter Updates...
  • Page 3 Copyright Copyright © 2008 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Acer Incorporated.
  • Page 4 Conventions The following conventions are used in this manual: SCREEN MESSAGES NOTE WARNING CAUTION IMPORTANT Denotes actual messages that appear on screen. Gives bits and pieces of additional information related to the current topic. Alerts you to any damage that might result from doing or not doing specific actions.
  • Page 5 DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and service of customer machines.

  • Page 7: Table Of Contents

    Using the System Utilities ..........16 Acer GridVista (dual-display compatible) ......16 Launch Manager .
  • Page 8 Table of Contents Removing the Hard Disk Drive Module ....... .58 Removing the Optical Drive Module .
  • Page 9 Replacing the Upper Right Saddle ........123 Replacing the Launch Board ........125 Replacing the Finger Print Reader .
  • Page 10 Table of Contents Model Definition and Configuration Aspire 5530 Series ..........182 Test Compatible Components Microsoft®...

  • Page 11: System Specifications

    AMD Athlon™ Dual-Core Processor* • AMD M780G Chipset • Acer InviLink™ 802.11b/g* • Acer InviLink™ Nplify™ 802.11b/g/Draft-N* • System Memory Dual-Channel DDR2 support • Up to 2 GB of DDR2 667 MHz memory, upgradeable to 4 GB using two soDIMM modules •...

  • Page 12: Privacy Control

    Special keys and controls 88-/89-/93-key keyboard • Touchpad pointing device • Empowering Key • Easy-launch buttons: WLAN, Internet, email, Bluetooth, Acer Arcade™ • Acer MediaTouch keys: play/pause, stop, previous, next • Volume wheel • Acer Media Center remote control* •...
  • Page 13 • Line-in jack • Ethernet (RJ-45) port • Modem (RJ-11) port • DC-in jack for AC adapter • Acer EasyPort IV connector • Environment Temperature: • Operating: 5 °C to 35 °C • Non-operating: -20 °C to 65 °C •...

  • Page 14: System Block Diagram

    System Block Diagram Chapter 1...

  • Page 15: Your Acer Notebook Tour

    Your Acer Notebook tour After knowing your computer features, let us show you around your new computer. Front View Icon Chapter 1 Item Microphone Internal microphone for sound recording. Acer Crystal Eye Web camera for video communication. Display screen Also called Liquid-Crystal Display (LCD), displays computer output.

  • Page 16: Closed Front View

    (only for certain models). Status indicators Light-Emitting Diodes (LEDs) that light up to show the status of the computer's functions and components. Acer MediaTouch For use with Acer Arcade and other media keys playing programs. Empowering key Launch Acer Empowering Technology. Status indicators...

  • Page 17: Left View

    HDMI Chapter 1 Item Kensington lock Connects to a Kensington-compatible slot computer security lock. Acer EasyPort IV Connects to Acer EasyPort IV. connector Ethernet (RJ-45) Connects to an Ethernet 10/100/1000-based port network. External display Connects to a display device (VGA) port (e.g.

  • Page 18: Right View

    Right View Icon Rear View Icon Item USB 2.0 port Connect to USB 2.0 devices (e.g. USB mouse, USB camera). Optical drive Internal optical drive; accepts CDs or DVDs. Optical disk access Lights up when the optical drive is active. indicator Optical drive eject Ejects the optical disk from the drive.

  • Page 19: Bottom View

    Bottom View Icon Chapter 1 Item Battery bay Houses the computer's battery pack. Battery release Releases the battery for removal. latch Battery lock Locks the battery in position. Memory Houses the computer's main memory. compartment Sub-woofer Emits low frequency sound output. Hard disk bay Houses the computer's hard disk (secured with screws).

  • Page 20: Indicators

    WLAN, Internet, email, Bluetooth, Arcade and Acer Empowering Technology. The mail and Web browser buttons are pre-set to email and Internet programs, but can be reset by users. To set the Web browser, mail and programmable buttons, run the Acer Launch Manager. Icon...

  • Page 21: Touchpad Basics (With Fingerprint Reader)

    Touchpad Basics (with fingerprint reader) The following items show you how to use the touchpad with Acer Bio-Protection fingerprint reader: Move your finger across the touchpad (2) to move the cursor. • Press the left (1) and right (4) buttons located beneath the touchpad to perform selection and •...

  • Page 22: Using The Keyboard

    Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor, lock, Windows, function and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which you can toggle on and off. Lock key Caps Lock When Caps Lock is on, all alphabetic characters typed are in uppercase.

  • Page 23: Windows Keys

    Windows Keys The keyboard has two keys that perform Windows-specific functions. Windows key Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu. It can also be used with other keys to provide a variety of functions: : Open or close the Start menu <...

  • Page 24: Hot Keys

    + < > + + Function Hotkey help Displays help on hotkeys. Acer eSettings Launches Acer eSettings Management in Acer Management Empowering Technology. Acer ePower Launches Acer ePower Management in Acer Management Empowering Technology. Sleep Puts the computer in Sleep mode.

  • Page 25: Special Key

    Special Key You can locate the Euro symbol and the US dollar sign at the upper-center and/or bottom-right of your keyboard. The Euro symbol Open a text editor or word processor. Hold and then press the <5> key at the upper-center of the keyboard. NOTE: Note: Some fonts and software do not support the Euro symbol.

  • Page 26: Using The System Utilities

    Apply to confirm the new settings and click OK to complete the process. Acer GridVista is a handy utility that offers four pre-defined display settings so you can view multiple windows on the same screen. To access this function, please go to Start You may choose any one of the four display settings indicated below: All Programs and click on Acer GridVista.

  • Page 27: Launch Manager

    Double (vertical), Triple (primary at left), Triple (primary at right), or Quad Acer Gridvista is dual-display compatible, allowing two displays to be partitioned independently. Acer Gridvista is dual-display compatible, allowing two displays to be partitioned independently. AcerGridVista is simple to set up: Run Acer GridVista and select your preferred screen configuration for each display from the task bar.

  • Page 28: Hardware Specifications And Configurations

    • S1G2 package CPU Acoustic Level (dBA) Specification Phoenix V0.19T1 Flash ROM 1MB • Support ISIPP • Support Acer UI • Support multi-boot • Suspend to RAM (S3) • Various hot-keys for system control • Support SMBIOS 2.3,PCI2.2. • DMI utility for BIOS serial number configurable/asset tag •...
  • Page 29 Item DIMM socket number Supports memory size per socket Supports maximum memory size Supports DIMM type Memory module combinations Memory Combinations Slot 1 256MB 256MB 256MB 256MB 512MB 512MB 512MB 512MB 1024MB 1024MB 1024MB 1024MB 1024MB 2048MB 2048MB 2048MB 2048MB 2048MB NOTE: Above table lists some system memory configurations.
  • Page 30 LAN Interface Item LAN Chipset Supports LAN protocol LAN connector type LAN connector location Features Bluetooth Interface Item Chipset Data throughput Protocol Interface Connector type Wireless Module 802.11b/g Item Chipset Data throughput Protocol Interface Specification RealTek 8111C for GIGA LAN Integrated 10/100/10000BASE-T transceiver RJ-45 Left side...
  • Page 31 Hard Disk Drive Interface Item Vendor & Segate Model ST9250827AS Name ST9200827AS ST9160827AS ST9120817AS Capacity 250, 200, 160, 120 (MB) Bytes per sector Data heads 4, 4, 3, 2 Drive Format Disks 2, 2, 2, 1 Spindle 5400 speed (RPM) Performance Specifications Buffer size 8 MB...
  • Page 32 Combo Drive Module Item Vendor & model name Performance Specification Transfer rate (KB/sec) Buffer Memory Interface Applicable disc format Loading mechanism Power Requirement Input Voltage Video Memory Item Chipset Memory size Features USB Interface Item Chipset USB Compliancy Level Number of USB port Location System Board Major Chips Item...
  • Page 33 Card Reader Item Chipset Features Keyboard Item Keyboard controller Total number of keypads Windows logo key Internal & external keyboard work simultaneously Chapter 1 Controller JMicron JMB385 Compliant with PCI Express Base Spec. Revision 1.1 • Compliant with SD Spec. Part 1 Physical Layer Spec. •...
  • Page 34 Audio Interface Item Audio Controller Features Battery Item Vendor & model name Battery Type Pack capacity Number of battery cell Package configuration Normal voltage Charge voltage Specification Realtek ALC268S for High Definition Audio Codec High-performance DACs with 97dB SNR (A-Weighting), ADCs with •...
  • Page 35 LCD 15.4” Item Vendor/model name Screen Diagonal (mm) Active Area (mm) Display resolution (pixels) Pixel Pitch Pixel Arrangement Display Mode Typical White Luminance (cd/m also called Brightness Luminance Uniformity Contrast Ratio Response Time (Optical Rise Time/Fall Time) msec Nominal Input Voltage VDD Typical Power Consumption (watt) Weight (without inverter) Physical Size (mm)
  • Page 36 LCD Inverter Item Vendor & model name Brightness conditions Input voltage (V) Input current (mA) Output voltage (V, rms) Output current (mA, rms) Output voltage frequency (k Hz) AC Adapter Item Input rating Maximum input AC current Inrush current Efficiency System Power Management ACPI mode Features...

  • Page 37: System Utilities

    System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup.

  • Page 38: Information

    Information The Information screen displays a summary of your computer hardware information. Information Main CPU Type: CPU Speed: HDD Model Name: HDD Serial Number: ATAPI Model Name: System BIOS Version: VGA BIOS Version: Serial Number: Asset Tag Number: Product Name: Manufacturer Name: UUID: ↑↓...

  • Page 39: Main

    Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. Information Main Advanced System Time System Date System Memory Extended Memory Video Memory Quiet Boot Network Boot F12 Boot Menu ↑↓...

  • Page 40: Advanced

    Advanced The Advanced screen allows the user to configure the various advanced BIOS options. IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend that you leave these settings at the default values.
  • Page 41 Parameter On chip SATA Enable On chip SATA. SATA Class ID Select the SATA Class ID. SATA IDE Set SATA IDE Combined mode. Combined mode PATA Channel Set the SATA channel as Primary or Config Secondary channel. ACHI ROM Select SATA option ROM POST delay. POST delay USB Host Enable or disable USB hardware.

  • Page 42: Security

    Security The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. Information Main Advanced Supervisor Password Is User Password Is HDD 0 Password Is Set Supervisor Password Set User Password Power on Boot ↑↓ Help Select Item ←→...

  • Page 43: Setting A Password

    Setting a Password Follow these steps as you set the user or the supervisor password: Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Supervisor Password box appears: Type a password in the “Enter New Password” field. The password length can not exceeds 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive).

  • Page 44: Changing A Password

    Changing a Password Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears. Type the current password in the Enter Current Password field and press Enter. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field.

  • Page 45: Power

    Power The Power screen allows the user to configure CPU and power management options. Information Main Enable ACPI (debug only): High Precision Event Timer ↑↓ Help Select Item ←→ Exit Select Menu The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter settings.

  • Page 46: Boot

    Boot This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay. Information Main Advanced Boot priority order: 1.

  • Page 47: Amd

    The AMD screen allows the user to configure memory, thermal management options, and device wakeup behavior. Information Main Advanced CBS Options PBS Options ↑↓ Help Select Item ←→ Exit Select Menu Parameter CBS Options Manage common platform BIOS settings. PBS Options Chapter 2 PhoenixBIOS Setup Utility Security...

  • Page 48: Exit

    Exit The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility. Information Main Advanced Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes ↑↓ Help Select Item ←→ Exit Select Menu The table below describes the parameters in this screen.

  • Page 49: Bios Flash Utilities

    BIOS Flash Utilities The BIOS flash memory update is required for the following conditions: New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. • Use the Phlash utility to update the system BIOS flash ROM. NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility.

  • Page 50: Dos Flash Utility

    DOS Flash Utility Perform the following steps to use the DOS Flash Utility: Press F2 during boot to enter the Setup Menu. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
  • Page 51 In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays. Plug in the AC power to continue. Flash is complete when the message Flash programming complete displays. Chapter 2...

  • Page 52: Winflash Utility

    WinFlash Utility Perform the following steps to use the WinFlash Utility: Double click the WinFlash executable. The Destination Directory screen displays. Click Start. A warning screen displays. Click OK to begin the update. A progress screen displays. When the process is complete, close all programs and applications and reboot the system. Chapter 2...

  • Page 53: Remove Hdd/Bios Password Utilities

    Remove HDD/BIOS Password Utilities This section provide you with removing HDD/BIOS method: Remove HDD Password: When the user keys in the wrong password three times, the system reports the following error code to user. To unlock the HDD password, perform the following steps: Press Enter to display the Select Item screen.
  • Page 54 Removing BIOS Passwords: If you key in the wrong Supervisor Password three times, System Disabled displays on the screen. See the image below. To reset the BIOS password, run BIOS_PW.EXE as follows: Key in bios_pw 14452 0 Select one string from the list. Chapter 2...
  • Page 55 Reboot the system and key in the selected string (qjjg9vy, 07yqmjd etc.) for the BIOS user password. Cleaning BIOS Passwords To clear the password, perform the following steps: From a DOS prompt, Execute clnpwd.exe Press 1 or 2 to clean the desired password shown on the screen. The onscreen message determines whether the function is successful or not.

  • Page 56: Miscellaneous Utilities

    Miscellaneous Utilities Using DMITools The DMI (Desktop Management Interface) Tool copies BIOS information to eeprom to be used in the DMI pool for hardware management. When the BIOS displays Verifying DMI pool data it is checking the table correlates with the hardware before sending to the operating system (Windows, etc.).

  • Page 57: Machine Disassembly And Replacement

    Machine Disassembly and Replacement This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. Disassembly Requirements To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge •...

  • Page 58: General Information

    General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cables from the system. 3.

  • Page 59: External Module Disassembly Process

    External Module Disassembly Process External Modules Disassembly Flowchart The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.

  • Page 60: Removing The Battery Pack

    Removing the Battery Pack 1. Turn computer over. 2. Slide the battery lock/unlock latch to the unlock position. 3. Slide and hold the battery release latch to the release position (1), then slide out the battery pack from the main unit (2).

  • Page 61: Removing The Sd Dummy Card

    Removing the SD dummy card 1. Push the SD dummy card in to eject it. 2. Grasp the card and pull it out from the slot. Chapter 3...

  • Page 62: Removing The Expresscard Dummy Card

    Removing the ExpressCard dummy card 1. Push the ExpressCard dummy card in to eject it. 2. Grasp the card and pull it out from the slot. Chapter 3...

  • Page 63: Removing The Lower Covers

    Removing the Lower Covers 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the SD dummy card” on page 49. 3. See “Removing the ExpressCard dummy card” on page 50. 4. Remove the two screws from the memory and WLAN bays and loosen the two captive HDD bay screws. WLAN Cover Step...
  • Page 64 6. Remove the HDD cover as shown. 7. Remove the WLAN cover as shown. Chapter 3...

  • Page 65: Removing The Dimm Modules

    Removing the DIMM Modules 1. Remove the Battery Pack. See “Removing the Battery Pack” on page 48. 2. Remove the Memory Module cover See “Removing the Lower Covers” on page 51. 3. Push out the release latches on both sides of the DIMM socket to release the DIMM module. 4.

  • Page 66: Removing The Wlan Module

    Removing the WLAN Module 1. See “Removing the Battery Pack” on page 48. 2. Remove the WLAN cover. See “Removing the Lower Covers” on page 51. 3. Disconnect the antenna cables from the WLAN board. 4. Move the antenna cables away and remove the two screws on the WLAN board to release the WLAN board. Step WLAN Module M2*3 (NL)
  • Page 67 5. Detach the WLAN board from the WLAN socket. NOTE: When re-attaching the antenna to the WLAN board, make sure the cables are arranged under the WLAN bracket. Chapter 3...

  • Page 68: Removing The Tv Tuner Module

    Removing the TV tuner Module 1. See “Removing the Lower Covers” on page 51. 1. Remove the securing screw, located on the WLAN bracket, and remove the bracket. NOTE: Move the antenna cables out of the way to allow for easier access. Step WLAN Bracket M2*3 (NL)
  • Page 69 3. Disconnect the cable from the TV tuner module. 4. Remove the two securing screws. Step Size Quantity Screw Type TV Tuner Module M2*3 (NL) 5. Remove the tv tuner module. Chapter 3...

  • Page 70: Removing The Hard Disk Drive Module

    Removing the Hard Disk Drive Module 1. See “Removing the Battery Pack” on page 48. 2. Remove the HDD cover, See “Removing the Lower Covers” on page 51. 3. Use the mylar tab to slide and lift up the hard disk drive module to remove. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
  • Page 71 4. Remove the four screws securing the hard disk to the carrier. Step Size Quantity Screw Type HDD Carrier M3*3 (NL) 5. Remove the HDD from the carrier. Chapter 3...

  • Page 72: Removing The Optical Drive Module

    Removing the Optical Drive Module 1. Remove the Battery Pack. See “Removing the Battery Pack” on page 48. 2. Remove the Memory cover. See “Removing the Lower Covers” on page 51. 3. Remove the screw securing the ODD module. Step ODD Module M2.5*5(NL) 4.
  • Page 73 5. Remove the three screws securing the ODD bracket and remove the ODD bracket from the optical disk drive module. Step Size Quantity Screw Type ODD Bracket M2*3 (NL) 6. Insert a pin in the eject hole of the ODD to eject the ODD tray. 7.

  • Page 74: Main Unit Disassembly Process

    Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List Step Switch Cover LCD Module Upper Cover Screw Quantity M2*3 (NL) M2.5*8(NL) M2.5*5 (NL) M2.5*8 (NL) M2.5*5 (NL) Color Part No. Chapter 3...
  • Page 75 Step Finger Print Reader Upper Right Saddle Left Speaker Module Upper left Saddle Touch Pad Bracket eKey Board Switch Board Right Speaker Module TV Board USB Board Modem Module Subwoofer Mainboard Thermal Module VGA Module Chapter 3 Screw Quantity M2*3 (NL) M2*3 (NL) M2.5*4 (NL) M2.5*4 (NL)

  • Page 76: Removing The Switch Cover

    Removing the Switch Cover CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is recommended that only fingers are used to remove the Switch Cover. 1. See “Removing the Battery Pack” on page 48. 2.

  • Page 77: Removing The Keyboard

    Removing the Keyboard 1. See “Removing the Battery Pack” on page 48.. 2. Push down on the two latches securing the keyboard to the upper case. 3. Turn the keyboard over and pull back the securing latch to release the FFC. Chapter 3...

  • Page 78: Removing The Antenna

    Removing the Antenna WARNING:Do not attempt to pull the antenna cables under the WLAN bracket to prevent stripping of the cable. 1. See “Removing the WLAN Module” on page 54. 2. Remove the securing screw, located on the WLAN bracket, and remove the bracket. NOTE: Move the antenna cables out of the way to allow for easier access.
  • Page 79 4. Using one hand, pull the cables completely through the battery housing. NOTE: Do not remove the adhesive tape. 5. Push the cables through the chassis, then turn over the computer and pull them completely through. Chapter 3...

  • Page 80: Removing The Lcd Module

    Removing the LCD Module 1. Remove the Antenna. Remove the Antenna. See “Removing the Antenna” on page 66. 2. Remove the two securing screws from the bottom of the chassis. Step LCD Module M2.5*8(NL) 3. Turn the computer over. Disconnect the LCD, MIC and back light cables from the top panel. LCD cable Size Quantity...
  • Page 81 4. Remove the four securing screws (two on each side) connecting the LCD module. Step LCD Hinges M2.5*6 (NL) (Red call out) LCD Hinges M2.5*10 (NL) (Blue call out) 5. Carefully remove the LCD module from the chassis. Chapter 3 Size Quantity Screw Type...

  • Page 82: Removing The Upper Cover

    Removing the Upper Cover 1. Remove the LCD Module. See “Removing the LCD Module” on page 68. 2. Turn the computer over. Remove the nine screws on the bottom panel. Step Upper Cover M2.5*10 (NL) 3. Turn the computer over. Remove the five screws on the top panel. Step Upper Cover M2.5*4 (NL)
  • Page 83 4. Disconnect the seven cables from the mainboard as shown. Disconnect A as shown. Release the securing latches and disconnect C as shown. Chapter 3 Release the securing latches and disconnect B as shown. Release the securing latches and disconnect D as shown.
  • Page 84 Release the securing latches and disconnect E as shown. Release the securing latches and disconnect G as shown. 5. Remove the upper cover by lifting upward from the chassis, rear edge first. Release the securing latches and disconnect F as shown.
  • Page 85 6. Turn the upper cover over. The upper cover appears as follows. Chapter 3...

  • Page 86: Removing The Finger Print Reader

    Removing the Finger Print Reader 1. See “Removing the Upper Cover” on page 70. 2. Remove the securing screw from the Finger Print Reader board, and ensure the FFC is free of the upper cover. Step Finger Print M2*3 (NL) Reader 3.

  • Page 87: Removing The Upper Right Saddle

    Removing the Upper Right Saddle 1. See “Removing the Upper Cover” on page 70. 2. Remove the two securing screws from the upper saddle. Step Upper Right M2*3 (NL) Saddle 3. Grasp the upper saddle and lift up to remove. Chapter 3 Size Quantity...

  • Page 88: Removing The Left Speaker Module

    Removing the Left Speaker Module 1. See “Removing the Upper Cover” on page 70. 2. Remove the two securing screws from the left speaker. Step Left Speaker M2.5*4 (NL) Module 3. Grasp both ends of the mylar cover and carefully pull back to expose the speaker cable. 4.

  • Page 89: Removing The Upper Left Saddle

    5. Remove the left speaker module as shown. Removing the Upper Left Saddle 1. See “Removing the Upper Cover” on page 70. 2. Pull back the mylar cover to expose the top securing screw. 3. Remove the bottom securing screw. 4.

  • Page 90: Removing The Touch Pad Bracket

    Step Left Speaker M2.5*4 (NL) Module 5. Firmly lift and rotate the saddle counter-clockwise to remove, paying attention to the securing clip. Removing the Touch Pad Bracket 1. See “Removing the Upper Cover” on page 70. 2. Disconnect the Touch Pad FFC from the Touch Pad board. 3.
  • Page 91 4. Remove the two securing screws from the Touch Pad bracket. Step Size Quantity Screw Type Touch Pad Bracket M2*3 (NL) 5. Remove the Touch Pad bracket. IMPORTANT:The Touch Pad cannot be removed individually. To replace the Touch Pad, replace the entire Upper Cover.

  • Page 92: Removing The Launch Board

    Removing the Launch Board 1. See “Removing the Upper Left Saddle” on page 77. 2. Grasp the Launch Board and lift up to remove from the Upper Cover. Removing the Media Board 1. See “Removing the Upper Left Saddle” on page 77. 2.

  • Page 93: Removing The Ekey Board

    IMPORTANT:Do not press on components to prevent damage. Removing the eKey Board 1. See “Removing the Upper Right Saddle” on page 75. 2. Turn the Upper Cover over and remove the FFC. 3. Remove the single screw Step eKey Board M2*3 (NL) Chapter 3 Size...
  • Page 94 4. Pry the eKey board off the Upper Cover. 5. Grasp the board and gently pull the FFC through the Upper Cover. Chapter 3...

  • Page 95: Removing The Switch Board

    Removing the Switch Board 1. See “Removing the Upper Cover” on page 70. 2. Remove the single securing screw. Step Size Quantity Screw Type Switch Board M2.5*4 (NL) 3. Lift the switch board and FFC up and away from the upper cover. Chapter 3...

  • Page 96: Removing The Right Speaker Module

    Removing the Right Speaker Module 1. Remove the Upper Cover. See “Removing the Upper Cover” on page 70. 2. Remove the two securing screws from the speaker module. Step Speaker M2.5*4 (NL) 3. Disconnect the speaker cable from the mainboard. 4.

  • Page 97: Removing The Tv Board

    Removing the TV Board 1. See “Removing the Upper Cover” on page 70. 2. Disconnect the antenna and cable from the board. 3. Remove the two securing screws from the TV board. Step TV Board M2.5*4 (NL) 4. Remove the TV board from the lower base. Chapter 3 Size Quantity...

  • Page 98: Removing The Bluetooth Module

    Removing the Bluetooth Module 1. See “Removing the Upper Cover” on page 70. 2. Grasp the Bluetooth module and lift to remove. 3. Lift the Bluetooth module away from the base and disconnect the bluetooth cable. Chapter 3...

  • Page 99: Removing The Usb Board

    Removing the USB Board 1. See “Removing the Upper Cover” on page 70. 2. See “Removing the Bluetooth Module” on page 86. 3. Remove cable from the USB board. 4. Remove the two securing screws from the USB board and lift clear of the chassis. Step USB board M2.5*4 (NL)

  • Page 100: Removing The Modem Module

    Removing the Modem Module 1. See “Removing the Upper Cover” on page 70. 2. Remove securing screw from the modem module. Step Modem Module M2*3 (NL) 3. Lift the module and disconnect the modem cable as shown in the following images. Size Quantity Screw Type...

  • Page 101: Removing The Subwoofer Module

    Removing the Subwoofer Module 1. See “Removing the Upper Cover” on page 70. 2. Disconnect the subwoofer cable as shown. 3. Remove the two securing screws from the subwoofer module and lift the subwoofer clear of the chassis. Step Subwoofer M2*3 (NL) Chapter 3 Size...

  • Page 102: Removing The Main Board

    Removing the Main Board 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the Keyboard” on page 65. 3. See “Removing the LCD Module” on page 68. 4. See “Removing the Upper Cover” on page 70. 5. Disconnect the three cables from the bottom right of the mainboard as shown. 6.
  • Page 103 7. Remove the two securing screws from the Mainboard. Step Size Quantity Screw Type Mainboard M2.5*5 (NL) 8. Remove the main board, rightside first, as shown. 9. Lift the power jack clear of power port on the Lower Cover. Chapter 3...

  • Page 104: Removing The Rj-11 Port

    Removing the RJ-11 Port 1. See “Removing the Upper Cover” on page 70. 2. See “Removing the Right Speaker Module” on page 84. 3. See “Removing the Main Board” on page 90. 4. Remove the RJ-11 cable from its housing. 5.

  • Page 105: Removing The Thermal Module

    Removing the Thermal Module 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the LCD Module” on page 68. 3. See “Removing the Upper Cover” on page 70. 4. See “Removing the Main Board” on page 90. 5.
  • Page 106 7. Lift the Thermal Module clear of the Mainboard. Chapter 3...

  • Page 107: Removing The Cpu

    Removing the CPU 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the Upper Cover” on page 70. 3. See “Removing the Main Board” on page 90. 4. See “Removing the Thermal Module” on page 93. 5. Using a flat screwdriver, turn the CPU socket latch counter-clockwise 180° to release the CPU. 6.

  • Page 108: Removing The Vga Module

    Removing the VGA Module 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the Upper Cover” on page 70. 3. See “Removing the Main Board” on page 90. 4. Remove the two securing screws from the VGA Module. Step VGA Module M2*4-NI (NL)

  • Page 109: Lcd Module Disassembly Process

    LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Step Screw LCD Bezel M2.5*5 (NL) Inverter Board M2.5*5 (NL) Camera Module M2*3 (NL) Camera Board M2*3 (NL) LCD Panel M2.5*5 (NL) LCD Brackets M2*3 (NL) Chapter 3 Quantity Color Black Black Black...

  • Page 110: Removing The Lcd Bezel

    Removing the LCD Bezel 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the LCD Module” on page 68. 3. Remove the two upper and two lower bezel screw caps. Remove the four securing screws from the LCD module.

  • Page 111: Removing The Lcd Bezel

    Removing the Inverter Board 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the LCD Module” on page 68. 3. See “Removing the LCD Bezel” on page 98. 4. Remove the securing tapes from the left and right sides of the Inverter board as shown. 5.
  • Page 112 6. Disconnect the left and right Inverter board cables as shown. Chapter 3...

  • Page 113: Removing The Camera Module

    Removing the Camera Module 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the Lower Covers” on page 51. 3. See “Removing the WLAN Module” on page 54. 4. See “Removing the Keyboard” on page 65. 5. See “Removing the LCD Module” on page 68. 6.
  • Page 114 9. Lift the Camera Module clear of the LCD Module. 10. Remove the securing screw from the camera board. Step Size Quantity Screw Type Camera Board M2*3 (NL) 11. Remove the camera board from the bracket. Chapter 3...

  • Page 115: Removing The Lcd Panel

    Removing the LCD Panel 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the Lower Covers” on page 51. 3. See “Removing the WLAN Module” on page 54. 4. See “Removing the Keyboard” on page 65. 5. See “Removing the LCD Module” on page 68. 6.

  • Page 116: Removing The Lcd Brackets And Fpc Cable

    Removing the LCD Brackets and FPC Cable 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the Lower Covers” on page 51. 3. See “Removing the WLAN Module” on page 54. 4. See “Removing the Keyboard” on page 65. 5.

  • Page 117: Removing The Antennas

    Removing the Antennas 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the Lower Covers” on page 51. 3. See “Removing the WLAN Module” on page 54. 4. See “Removing the LCD Panel” on page 103. 5. Remove the strips holding the antenna cables in place. Ensure the cables are free from obstructions. 6.

  • Page 118: Removing The Mic Module

    Removing the MIC Module 1. See “Removing the Battery Pack” on page 48. 2. See “Removing the Lower Covers” on page 51. 3. See “Removing the WLAN Module” on page 54. 4. See “Removing the LCD Panel” on page 103. 5.

  • Page 119: Lcd Module Reassembly Procedure

    LCD Module Reassembly Procedure Replacing the LCD Panel 1. Align the LCD brackets with the eight screw holes (four on each side) on the LCD Panel as shown. 2. Secure the LCD brackets to the LCD panel. 3. Turn the panel over. Insert the LCD Panel cable into the LCD Panel as shown. Chapter 3...
  • Page 120 4. Replace the MIC cable under the mylar tab strips, and replace the MIC as shown. Secure the cable by pressing down on the strips. 5. Replace the antenna cables and assembly. 6. Replace the tabs securing the left and right antennas to the LCD module. 7.
  • Page 121 8. Secure the cable by pressing down on the securing strip. 10. Replace the camera board in the bracket. 12. Replace the Camera Module in the bottom cover. Chapter 3 9. Replace the two securing screws on the LCD Module. 11.
  • Page 122 14. Connect the Camera Module cable as shown. 15. Connect the left and right Inverter board cables as shown. 16. Connect the left and right Inverter board cables as shown. 17. Replace the inverter board and secure with the two provided screws. Chapter 3...

  • Page 123: Replacing The Lcd Bezel

    18. Replace the securing tapes from the left and right sides of the Inverter board as shown. NOTE: Tuck the cables securely to prevent damage to the cables or module. Replacing the LCD Bezel 1. Align the edge of the bezel with the bottom cover and replace the LCD Module. 2.

  • Page 124: Main Module Reassembly Procedure

    Main Module Reassembly Procedure Replacing the VGA Module 1. Insert the VGA Module as shown. Replacing the CPU 1. Carefully turn the mainboard upside down (CPU side up), and insert the CPU into the CPU bracket as shown. 2. Replace the two securing screws on the VGA Module.

  • Page 125: Replacing The Thermal Module

    Replacing the Thermal Module 1. Align and place the Thermal Module in the mounting as shown. 3. Replace the eight securing screws from the Thermal Module. Replacing the RJ-11 Port 1. Insert the RJ-11 port into the base as shown. Chapter 3 2.
  • Page 126 3. Replace the RJ-11 cable in its housing. Chapter 3...

  • Page 127: Replacing The Mainboard

    Replacing the Mainboard 1. Replace the power jack in the Lower Cover. 3. Ensure that the Mainboard is face up (the Heatsink and CPU are not visible). Place the Mainboard in the chassis, rear edge first, and press down to install. Replace the two securing screws as shown. NOTE: Make sure the I/O ports are positioned correctly through the lower cover, and the screw sockets are visible through the mainboard.

  • Page 128: Replacing Subwoofer Module

    Replacing Subwoofer Module 6. Locate the Subwoofer on the lower cover, and replace the two securing screws. 7. Connect the subwoofer cable as shown. Replacing the Modem Module 1. Connect the modem cable and locate it over the screw socket. 2.

  • Page 129: Replacing The Usb Board

    3. Replace the securing screw on the modem module. Replacing the USB Board 1. Angle the right side of the USB board into the lower base. Align the screw sockets and replace the two securing screws. 2. Replace the cable on the USB board. Chapter 3...

  • Page 130: Replacing The Bluetooth Board

    Replacing the Bluetooth Board 1. While holding the Bluetooth module, connect the cable as shown. Replacing the TV Board 1. Angle the TV board into the lower base and lower into position. 2. Replace the two securing screws on the TV board. 3.

  • Page 131: Replacing The Right Speaker Module

    Replacing the Right Speaker Module 1. Replace the speaker module and insert the cable completely through the housing as shown. 2. Connect the speaker cable to the mainboard. Chapter 3...

  • Page 132: Replacing The Switch Board

    3. Replace the two securing screws on the speaker module. Replacing the Switch Board 1. Position the Switch Board over the screw socket. Replacing the eKey Board 1. Insert the FFC through the Upper Cover. 2. Replace the single securing screw. Chapter 3...
  • Page 133 2. Insert the eKey board at an angle and press down to situate. 3. Replace the single screw 4. Turn the Upper Cover over and press the FFC down to secure in place. Chapter 3...

  • Page 134: Replacing The Media Board

    Replacing the Media Board 1. Insert the Media Board into the lower cover. If necessary, use a pry to press the board in place. IMPORTANT:Do not press on components to prevent damage. 2. Insert the FFC flush with the connector and press the locking lever down to secure. 3.

  • Page 135: Replacing The Upper Right Saddle

    Replacing the Upper Right Saddle 1. Insert the left edge into position and pivot the upper saddle in place. 2. Replace the two securing screws on the upper saddle. Chapter 3...

  • Page 136: Replacing The Launch Board

    Replacing the Launch Board 1. Insert the left edge of the Launch Board into place and pivot the board down in place. 3. Replace the two securing screws. Replacing the Finger Print Reader 1. Replace the Finger Print Reader board in the upper cover. 2.
  • Page 137 2. Replace the bracket as shown. 3. Replace the single securing screw. Chapter 3...

  • Page 138: Replacing The Touch Pad Bracket

    Replacing the Touch Pad Bracket IMPORTANT:The Touch Pad cannot be removed individually. To replace the Touch Pad, replace the entire Upper Cover. 1. Replace the Touch Pad bracket. 3. Replace the Finger Print reader FFC and secure with the adhesive strips. 2.

  • Page 139: Replacing The Left Speaker Module

    Replacing the Left Speaker Module 1. Align and replace the Speaker Module in the upper case. 4. While holding the mylar cover back with one hand, replace the speaker cable in its housing. 5. Replace the mylar cover to secure the cable. Replacing the Upper Cover 1.
  • Page 140 2. Connect the seven cables on the mainboard as shown. Chapter 3...

  • Page 141: Replacing The Lcd Module

    3. Replace the five screws on the top panel. 4. Turn the computer over. Replace the nine screws on the bottom panel. Replacing the LCD Module 1. Carefully align the LCD module over the hinge sockets and lower the module into the chassis. Chapter 3...
  • Page 142 2. Replace the four securing screws (two on each side) securing the LCD module. 3. Connect the LCD, MIC and back light cables. LCD cable MIC cable Back light cable Chapter 3...

  • Page 143: Replacing The Antenna Cables

    4. Turn the computer over and replace the two securing screws on the bottom of the chassis. Replacing the Antenna Cables Ensure that the three Antenna cables pass through the Mainboard and are accessible from the underside of lower cover. 1.

  • Page 144: Replacing The Keyboard

    Replacing the Keyboard 1. Align the FFC with the connector and press the latch down to secure. Replacing the Switch Cover 1. Insert the left side of the switch cover and angle down in place. 3. Turn the computer over and replace the three securing screws. 2.

  • Page 145: Replacing The Tv Tuner Module

    Replacing the TV Tuner Module 4. Replace the tv tuner module. 5. Replace the two securing screws. 6. Connect the cable to the TV tuner module. Chapter 3...
  • Page 146 7. Replace the adhesive strip to secure the cable. 8. Replace bracket and secure with provided screw. Chapter 3...

  • Page 147: Replacing The Wlan Module

    Replacing the WLAN Module 1. Insert the WLAN board into the WLAN socket. 3. Connect the two antenna cables to the module. Replacing the Hard Disk Drive Module 1. Place the HDD in the HDD carrier. Chapter 3 2. Replace the two screws to secure the module. 2.

  • Page 148: Replacing The Dimm Modules

    3. Insert the HDD, interface side first, until HDD firmly slides in place. Replacing the DIMM Modules NOTE: To replace DIMM Module 2, first remove DIMM Module 1. In this procedure, only DIMM Module 1 is shown. 1. Insert the DIMM Module flush with the connector and press down to lock in place. Chapter 3...

  • Page 149: Replacing The Odd Module

    Replacing the ODD Module 1. With the ODD tray in the eject position, replace the ODD cover on the new ODD Module. 3. Turn the ODD over and replace the three securing screws. 5. Replace the single screw to secure the Module. Chapter 3 2.

  • Page 150: Replacing The Lower Covers

    Replacing the Lower Covers 1. Replace the Memory Cover. 3. Replace the WLAN Cover. 5. Replace HDD Cover. 2. Replace the single screw to secure in place. 4. Replace the screw to secure in place. 6. Replace the two screws to secure in place. Chapter 3...

  • Page 151: Replacing The Express And Sd Card Trays

    Replacing the Express and SD Card Trays 1. Insert the Express Card and push into the slot until 2. Insert the SD Card and push into the slot until flush flush with the chassis cover. with the chassis cover. Chapter 3...
  • Page 152 Chapter 3...

  • Page 153: Troubleshooting

    Common Problems Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. Obtain the failing symptoms in as much detail as possible.

  • Page 154: Power On Issue

    Power On Issue If the system doesn’t power on, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the following actions one at a time to correct the problem. Check the power cable is properly connected to the computer and the electrical outlet.

  • Page 155: No Display Issue

    No Display Issue If the Display doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display, perform the following actions one at a time to correct the problem. Make sure that the internal display is selected.

  • Page 156: Random Loss Of Bios Settings

    Abnormal Video Display If video displays abnormally, perform the following actions one at a time to correct the problem. Reboot the computer. If permanent vertical/horizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced. See “Disassembly Process” on page 46. If extensive pixel damage is present (different colored spots in the same locations on the screen), the LCD is faulty and should be replaced.

  • Page 157: Lcd Failure

    LCD Failure If the LCD fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...

  • Page 158: Touchpad Failure

    Touchpad Failure If the Touchpad doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...

  • Page 159: Sound Problems

    Sound Problems If sound problems are experienced, perform the following actions one at a time to correct the problem. Reboot the computer. Navigate to Start Control Panel the Device Manager to determine that: The device is properly installed. • There are no red Xs or yellow exclamation marks. •...

  • Page 160: Internal Microphone Failure

    Internal Microphone Failure If the internal Microphone fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Microphone Problems If internal or external Microphones do no operate correctly, perform the following actions one at a time to correct the problem.

  • Page 161: Hdd Not Operating Correctly

    HDD Not Operating Correctly If the HDD does not operate correctly, perform the following actions one at a time to correct the problem. Disconnect all external devices. Run a complete virus scan using up-to-date software to ensure the computer is virus free. Run the Windows Vista Startup Repair Utility: insert the Windows Vista Operating System DVD in the ODD and restart the computer.

  • Page 162: Odd Failure

    ODD Failure If the ODD fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits any of the following symptoms it may be faulty: Audio CDs do not play when loaded •...
  • Page 163 Check that there are no yellow exclamation marks against the items in lDE ATA/ATAPI controllers. If a device has an exclamation mark, right-click on the device and uninstall and reinstall the driver. Check that there are no yellow exclamation marks against the items in DVD/CD-ROM drives. If a device has an exclamation mark, right-click on the device and uninstall and reinstall the driver.
  • Page 164 Repeat for the other ATA Devices shown if applicable. Drive Not Detected If Windows cannot detect the drive, perform the following actions one at a time to correct the problem. Restart the computer and press F2 to enter the BIOS Utility. Check that the drive is detected in the ATAPI Model Name field on the Information page.

  • Page 165: Usb Failure (Rightside)

    USB Failure (Rightside) If the rightside USB port fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Modem Function Failure If the internal Modem fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...

  • Page 166: Wireless Function Failure

    If the WLAN fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: EasyTouch Button Failure If the Acer EasyTouch buttons fail, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...

  • Page 167: Mediatouch Button Failure

    MediaTouch Button Failure If the Acer MediaTouch buttons fail, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Fingerprint Reader Failure If the Fingerprint Reader fails, perform the following actions one at a time to correct the problem. Do not...

  • Page 168: Thermal Unit Failure

    Thermal Unit Failure If the Thermal Unit fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: HDTV Switch Failure If the HDTV Switch fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...

  • Page 169: External Mouse Failure

    External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correct the problem. Try an alternative mouse. If the mouse uses a wireless connection, insert new batteries and confirm there is a good connection. See the mouse user manual.

  • Page 170: Intermittent Problems

    Issue” on page 142.): Power-off the computer. Visually check them for damage. If any problems are found, replace the FRU. Remove or disconnect all of the following devices: Non-Acer devices • Printer, mouse, and other external devices • Battery pack •...

  • Page 171: Post Codes Tables

    POST Codes Tables These tables describe the POST codes, functions, phases, and components for the POST. Chipset POST Codes The following table details the chipset POST codes and functions used in the POST. Code Beeps 1-2-2-3 8254 8237 1-3-1-1 1-3-1-3 1-3-4-1 1-3-4-3 1-4-1-1...
  • Page 172 Code Beeps 2-1-2-3 2-2-3-1 POST Routine Description Advanced configuration of chipset registers Load alternate registers with CMOS values Initialize interrupt vectors POST device initialization Check ROM copyright notice Check video configuration against CMOS Initialize PCI bus and devices Initialize all video adapters in system QuietBoot start (optional) Shadow video BIOS ROM Display BIOS copyright notice...
  • Page 173 Code Beeps Chapter 4 POST Routine Description Configure Motheboard Configurable Devices (optional) Initialize BIOS Data Area Enable Non-Maskable Interrupts (NMIs) Initialize Extended BIOS Data Area Test and initialize PS/2 mouse Initialize floppy controller Determine number of ATA drives (optional) Initialize hard-disk controllers Initialize local-bus hard-disk controllers Jump to UserPatch2 Build MPTABLE for multi-processor boards...
  • Page 174 Code Beeps Code Beeps * If the BIOS detects error 2C, 2E, or 30 (base 512K RAM error), it displays an additional word-bitmap (xxxx) indicating the address line or bits that failed. For example, 2C 0002 means address line 1 (bit one set) has failed.

  • Page 175: Jumper And Connector Locations

    Jumper and Connector Locations Top View Item Description JEXP1 NewCard Connector JLVDS1 LCE Connector JMDC1 Modem Connector JP10 Bluetooth Connector JP13 Internal TouchPad Connector JP15 Internal Keyboard Connector JP19 Speaker Left Connector JP20 Speaker Right Connector JP29 To PWR/B Connector JP30 To Lid SW/B Connector JP31...

  • Page 176: Bottom View

    Bottom View Item JCPU1 CPU Socket JCRT1 CRT Connector JDIMM1 Memory DIMM1 Connector JDIMM2 Memory DIMM2 Connector JHP1 Head-Phone Connector JLINE1 Line-In Jack JMIC1 MIC-In Jack JMIN1 Wireless Card Connector Description Item JREAD1 JRJ45 JSATA1 JSATA2 JUSB1 JUSB2 PJP1 PJP2 Description Card Reader Socket RJ45 LAN Connector...

  • Page 177: Clearing Password Check And Bios Recovery

    Clearing Password Check and BIOS Recovery This section provide you the standard operating procedures of clearing password and BIOS recovery for Aspire 5530. Aspire 5530 provide one Hardware Open Gap on main board for clearing password check, and one Hotkey for enabling BIOS Recovery. Clearing Password Check Hardware Open Gap Description Item...

  • Page 178: Bios Recovery By Crisis Disk

    BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
  • Page 179 A progress screen displays. 7. The following message displays when the Crisis Diskette is created successfully. 8. Click OK to complete the process. 9. Insert the Crisis Disk in to the USB floppy drive attached to the BIOS flash failed system. 10.
  • Page 180 Steps for BIOS Recovery by USB Disk: Before doing this, one Crisis USB Disk should be prepared ready in hand. The Crisis Diskette could be made by executing the Crisis Disk program in another system with Windows XP OS. 1. Plug in USB Flash Disk. 2.

  • Page 181: Fru (Field Replaceable Unit) List

    Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your Acer office may have a DIFFERENT part number code from those given in the FRU list of this printed Service Guide. You MUST use the local FRU list provided by your regional Acer office to order FRU parts for repair and service of customer machines.

  • Page 182: Aspire 5530 Exploded Diagram

    Aspire 5530 Exploded Diagram Item Strip Cover Upper Case Mainboard Bluetooth Module Power Cable Lower Case CPU Fan HDD Cover WLAN Cover Modem Cable Thermal Module Memory Cover WLAN Module Description Part Number Chapter 6...

  • Page 183: Aspire 5530 Fru List

    Aspire 5530 FRU List Category Adapter ADAPTER 65W 3PIN DELTA SADP-65KB DFA ADAPTER 65W 3PIN DELTA SADP65KB BFJA ADAPTER 65W 3PIN LITE-ON PA-1650-02AC ADAPTER 65W 3PIN HIPRO AC-OK065B13 ADAPTER 90W 3PIN DELTA ADP-90SB BBEA ADAPTER 90W 3PIN DELTA ADP90SB BBEN ADAPTER 90W 3PIN LITE-ON PA-1900-24AR ADAPTER 90W 3PIN HIPRO AC-OL093B13P Battery...
  • Page 184 Category Description Part Number USB BOARD TV BOARD W/RF TV BOARD W/O RF MEDIA BOARD FINGER PRINT BOARD POWER BOARD FUNCTION BOARD BUTTON BOARD HDMI BOARD-UMA Cable RJ11 CABLE BLUE TOOTH CABLE USB CABLE Chapter 6...
  • Page 185 Category TV BOARD CABLE MEDIA BOARD FFC ANTENNA-R ANTENNA-L T/P FFC POWER CORD US 3 PIN POWER CORD EU 3 PIN POWER CORD AUS 3 PIN POWER CORD UK 3 PIN POWER CORD CHINA 3 PIN POWER CORD SWISS 3 PIN POWER CORD ITALIAN 3 PIN POWER CORD DENMARK 3 PIN POWER CORD JP 3 PIN...
  • Page 186 Category Description Part Number Assembly STRIP COVER UPPER CASE ASSY W/FP UPPER CASE ASSY W/O FP T/P BRACKET LOWER CASE ASSY W/TV LOWER CASE ASSY W/OTV UPPER SADDLE-R UPPER SADDLE-L MINI PCI BRACKET-L FINGER PRINT BOARD BRACKET EXPRESS DUMMY CARD SD DUMMY CARD Chapter 6...
  • Page 187 Category RAM DOOR HDD DDOR MINI PCI DOOR DVD SUPER MULTI DRIVE PIONEER DVR-TD08RS 0FA DVD SUPER MULTI DRIVE TSST TS-L633A 0FA DVD SUPER MULTI DRIVE PANASONIC UJ-870S 0FA DVD SUPER MULTI DRIVE HLDS GSA-T50N 0FA DVD SUPER MULTI DRIVE SONY AD-7560S 0FA DVD SUPER MULTI DRIVE PLDS DS-8A2S 0FA ODD BEZEL-SUPER MULTI ODD BRACKET...
  • Page 188 Category Description Part Number HDD SATA 120G 5400RPM HGST HTS542512K9SA00 0FA HDD SATA 120G 5400RPM TOSHIBA MK1246GSX 0FA HDD SATA 120G 5400RPM SEAGATE ST9120817AS 0FA HDD SATA 120G 5400RPM WD WD1200BEVS-22UST0 0FA HDD SATA 160G 5400RPM HGST HTS542516K9SA00 0FA HDD SATA 160G 5400RPM HGST HTS543216L9A300 0FA HDD SATA 160G 5400RPM TOSHIBA MK1646GSX 0FA HDD SATA 160G 5400RPM TOSHIBA MK1652GSX 0FA HDD SATA 160G 5400RPM SEAGATE ST9160827AS 0FA...
  • Page 189 Category Keyboard KEYBOARD INTE(UI) BLACK AS KEYBOARD ARE BLACK AS KEYBOARD BE BLACK AS KEYBOARD BZ BLACK AS KEYBOARD CF BLACK AS KEYBOARD CH BLACK AS KEYBOARD CZ BLACK AS KEYBOARD DM BLACK AS KEYBOARD NL BLACK AS KEYBOARD FR BLACK AS KEYBOARD GR BLACK AS KEYBOARD GK BLACK AS KEYBOARD HG BLACK AS...
  • Page 190 Category Description Part Number LCD COVER LCD BEZEL LCD BRACKET-R LCD BRACKET-L CAMERA MODULE-0.3M CAMERA BRACKET SCREW PAD Mainboard MB ASSY-UMA MB ASSY-DIS THERMAL PAD-L THERMAL PAD-S Chapter 6...
  • Page 191 Category Memory RAM 512MB DDRII 667 NANYA NT512T64UH8B0FN-3C RAM 512MB DDRII 667 SAMSUNG M470T6464QZ3-CE6 RAM 512MB DDRII 667 SAMSUNG M470T6554EZ3-CE6 RAM 512MB DDRII 667 HYNIX HYMP164S64CP6-Y5 RAM 1G DDRII 667 NANYA NT1GT64U8HB0BN-3C RAM 1G DDRII 667 HYNIX HYMP112S64CP6-Y5 RAM 1G DDRII 667 SAMSUNG M470T2864QZ3-CE6 RAM 1G DDRII 667 SAMSUNG M470T2864DZ3-CE6 RAM 2G DDRII 667 MICRON MT16HTF25664HY-667E1 RAM 2G DDRII 667 HYNIX HYMP125S64CP8-Y5...
  • Page 192 Category RUBBER FOOT-L RUBBER FOOT-S Accessories DVB-T ANTENNA SMB-PAL CONNECTOR PAL-F CONNECTOR Screw List Category SCREW SCREW M2.5X4 (NL) SCREW SCREW M2.5X6 (NL) SCREW SCREW M M 2.45D 8.0L K 5.5D 0.8T ZK NL + SCREW SCREW M 2D 2.5L K 4.05D NI NL SCREW SCREW M2D 3.0L K 8.0D (Ni) SCREW...
  • Page 193 Chapter 6...

  • Page 194: Model Definition And Configuration

    Appendix A Model Definition and Configuration Aspire 5530 Series Acer DIMM DIMM HDD 1 Wireless Finger Model Country Part Description Bluetooth (GB) Print Appendix A...

  • Page 195: Test Compatible Components

    Appendix B Test Compatible Components This computer’s compatibility is tested and verified by Acer’s internal testing department. All of its system ® ® functions are tested under Windows XP Home, Windows XP Pro environment. Refer to the following lists for components, adapter cards, and peripherals which have passed these tests.

  • Page 196: Microsoft® Windows® Vista Environment Test

    Microsoft Windows ® With Fingerprint Reader SKU Vendor Type Cover Test Quanta Wistron Normal wi IMR Adapter Test DELTA DELTA 90W-DE Audio Codec Test Realtek ALC888S Back Cover Test B Cover Mirror w/Camera Battery Test SANYO 6CELL2.2 SANYO 8CELL2.4 Bluetooth Test Foxconn BT 2.0 Camera Test...
  • Page 197 ODD TOSHIBA Super-Multi DRIVE 12.7mm Tray DL 8X TS- L633A LF W/O bezel SATA Fomosa21 Remote Controller RC804V-B EU AMD SB700 Antivirus application McAfee AMD 86MEHM w/ HDCP w/o Macrovision Wistron Acer Xpress Card Phone Kit Rev 2.0 256M GDDR2 WiFi Antenna Foxconn Atheros XB63 minicard b/g...

  • Page 198: Without Fingerprint Reader Sku

    Without Fingerprint Reader SKU Vendor Type Cover Test None Quanta Wistron Adapter Test DELTA 90W-DE LITE-ON Audio Codec Test Realtek ALC888S Back Cover Test B Cover Mirror w/Camera Battery Test SANYO 6CELL2.2 SANYO 8CELL2.4 Bluetooth Test Foxconn BT 2.0 Camera Test Bison 0.3M DV Card Reader Test...
  • Page 199 ODD TOSHIBA Super-Multi DRIVE 12.7mm Tray DL 8X TS- L633A LF W/O bezel SATA Fomosa21 Remote Controller RC804V-B EU AMD SB700 Antivirus application McAfee AMD 82MEXTHM w/ HDCP w/o Macrovision Wistron Acer Xpress Card Phone Kit Rev 2.0 256M GDDR2 WiFi Antenna Foxconn Atheros XB63 minicard b/g...
  • Page 200 Appendix B...

  • Page 201: Online Support Information

    This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d.
  • Page 202 Appendix C...

  • Page 203: Index

    AFLASH Utility Antennas Battery Pack BIOS package password control ROM size ROM type vendor Version BIOS Supports protocol 25–37 BIOS Utility Advanced Boot Exit Navigating Onboard Device Configuration Power Save and Exit Security System Security Bluetooth module Board Layout Top View brightness hotkeys Cache...
  • Page 204 Keyboard Failure Launch Board LCD Bezel LCD Brackets LCD Failure LCD Module Disassembly Flowchart LCD Panel lower cover Main Unit Disassembly Flowchart Mainboard media access on indicator MediaTouch Button Failure Memory Check Model Definition Modem Failure Modem Module No Display Issue Notebook Manager hotkey num lock...
  • Page 205 Windows 2000 Environment Test Wireless Function Failure WLAN Board...

This manual is also suitable for:

AspireAspire 5530 series

Table of Contents