Disassembly and Reassembly
3-27) Evaporator Cover in the freezer
Part Name
Evaporator Cover in
the freezer
How To Do
1. Separate the steel cover
and disconnect the 2-
housing connectors on right
side.
Before conducting the
work above, make
sure that the unit is
CAUTION
unplugged.
2. Lift the pipe up carefully,
and separate the
evaporator by pulling the
drain .
3. After assembling the
evaporator, make sure that
1) Drain clip is just located
in the drain hole.
2) Sensor Fixer is attached
like the descriptive picture.
Descriptive Picture
53