Whirlpool AWZ 8000 Quick Reference Manual

Additional information (including troubleshooting and service) can be found in the individual chapters of the

instructions for use.

Sort laundry according to

care symbols:

Do not tumble dry

Suitable for tumble drying -

at low drying temperature

Suitable for tumble drying

Preparing laundry

Opening door

Loading dryer

Selecting programme

Selecting options

(if available)

Starting dryer

Programme end -

unloading dryer

Switching dryer off

For your safety: Only use additives/plastic items specified as dryer safe. Rinsed items that have been treated with stain remover

thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.

Machine operation

Sort by:

Material thickness: Whenever there is greater load than the dryer can handle,

separate laundry according to weight (e.g. dry towels and thin underwear

separately).

Type of material: Cotton (linen); synthetic textiles (easy care).

Degree of drying: Cupboard dry, iron dry etc.

Do not tumble dry: Woollens, silk, nylon stockings, delicate embroidery, fabrics

with metallic decorations, bulky items such as sleeping bags, etc.

Check that all fastenings are closed and that pockets are empty. Please ensure that

there are no cigarette lighters in the wash. Turn laundry inside out.

Pull the door handle.

Place laundry loosely in the drum to achieve equal drying throughout. Then close

the door.

Select the drying programme required by turning the programme selector knob (for

information, refer to programme table).

Select the option required by pressing the corresponding button.

The indicator lamp above the relevant button lights up to confirm your selection. A

fast blinking led indicates a wrong selection is made (incompatible options). Press

the button again to cancel the option.

The drying programme is started by pressing the "Start (Pause)" button.

The relevant indicator lamp lights up.

Changing programme selection: If the programme selected is changed during

drying, the dryer stops. The "Start (Pause)" indicator lamp flashes. To operate the

new programme, again press the "Start (Pause)" button.

Interrupting programme: To interrupt a drying cycle, press the "Start (Pause)"

button and open the door. Wait at least 5 minutes, to allow the laundry to cool

down, before you unload the dryer. For your safety the drying cycle stops

automatically if you open the door. To restart, after door opening, close the door

and press the "Start (Pause)" button again.

Warning: Never stop a tumble dryer before the end of the drying cycle, unless all

items are quickly removed and spread out so that the heat is dissipated.

The final part of a tumble dryer cycle occurs without heat (cool down cycle) to

ensure that the items are left at a temperature that ensures that the items will not

be damaged.

End: Take the laundry out of the dryer. The drying process is complete

and the anti-crease phase has been reached (active).

Anti-Crease: If the laundry is not removed at the end of the drying cycle,

an automatic anti-crease cycle will operate for maximum 15 min. The

drum rotates at regular intervals to prevent the laundry from creasing.

Set the programme selector knob to "Off" "

Cleaning the lint filter: Open door, pull lint filter up and out of machine and open

it. Brush lint using a soft brush or your fingertips. Push lint filter firmly back into

place.

".

1