GE JP5030 Owner's Manual page 15

Save time and money! Review the charts on the following pages first and you may not need to call for service. If an

error occurs in the control operation, a fault code will flash in the display. Record the error code and call for service.

Surface elements will not

cooking is slow

Surface elements do not

work properly

Power arc ON

Scratches on cooktop

glass surface

Areas of discoloration on

the cooktop

Plastic melted to the

surface

Pitting (or indentation) of

the cooktop

Unresponsive keypad

49-80746 Rev. 2

...

Cooktop controls improperly set.

the cookware and the surface of the cooktop.

surface.

Hot surface on a model with a light-colored

glass cooktop.

Hot cooktop came into contact with plastic

placed on the hot cooktop.

Keypad is dirty.

What To Do

the diameter of the surface unit selected.

Check to be sure the correct control is set for

the surface element you are using.

See the Operating the Cooking Elements

section.

the Cleaning the glass cooktop section.

To avoid scratches, use the recommended

cleaning procedures. Make sure bottoms

of cookware are clean before use, and use

cookware with smooth bottoms.

See the Cleaning the glass cooktop section.

This is normal. The surface may appear

discolored when it is hot. This is temporary

and will disappear as the glass cools.

See the Glass surface – potential for

permanent damage section in the Cleaning

the glass cooktop section.

Call a qualified technician for replacement.

Clean the keypad.

Replace the fuse or reset the circuit breaker.

15